F-01C INSTRUCTION MANUAL ’10.
F-01C_EN_ninshou DOCOMO W-CDMA, GSM/GPRS, Wireless LAN System Thank you for purchasing "docomo PRIME series F-01C" mobile terminal. Before using F-01C, read this manual to ensure safe use and handling. Instruction manuals for F-01C The operations of F-01C are described in this manual, "使いかたガイド (Guide)” (installed in FOMA terminal) and "Instruction manual (detailed version)" (in pdf format).
F-01C_EN_ninshou Contents Introduction Search FOMA terminal ............................................................... 2 What you can do with F-01C ......................................... 3 Part names and functions.............................................. 4 Usage styles.................................................................... 6 Precautions (ALWAYS FOLLOW THESE DIRECTIONS) 7 Handling precautions ..................................................... 14 Waterproofness/Dustproofness...
F-01C_EN_ninshou FOMA terminal ･ Because your FOMA terminal uses wireless transmission, it may Introduction ･ ･ ･ ･ 2 not function in locations where it is difficult for radio waves to penetrate, such as tunnels, underground passages and some buildings, in areas where radio waves are weak, or out of service area. Even when you are high up in a tall building or condominium and nothing blocks your view outside, your FOMA terminal may not be able to receive or transmit signals.
F-01C_EN_ninshou What you can do with F-01C AUTO-GPS 67 18 Waterproofness of IPX5 and IPX8 (which exceeds IPX7) and dustproofness of IP5X are provided by firmly closing the external connection jack cap and HDMI connection jack cap and installing the back cover in a locked state. Introduction The AUTO-GPS function allows for useful services that deliver information about the weather or shops around where you are, or sightseeing information.
F-01C_EN_ninshou Part names and functions Introduction 4 Part names of F-01C and major functions assigned to each part are as follows. a Earpiece b Light sensor * Sense the ambient luminance to automatically adjust the brightness of the display. Do not cover the sensor with your hand or a sticker. c Display (Touch panel)⇒P26, 28 d Microphone * Do not cover the microphone during a call or recording.
F-01C_EN_ninshou G Back cover lever * Firmly install the back cover and lock it with the lever before using to avoid water seepage. H Strap opening I External connection jack Connect optional AC adapter, DC adapter, FOMA USB Cable with Charge Function, Earphone Plug Adapter for External connector terminal etc. J HDMI connection jack K 1Seg antenna * Pull out for better signal reception when watching 1Seg.
F-01C_EN_ninshou Usage styles You can use functions by key operation and touch operation on the FOMA terminal. Point ･ Be careful not to close the terminal on your finger for switching to flip style. Introduction Closed style ･ Do not rotate the display clockwise more than 180-degree, or You can check missed calls, unread mail, Pedometer/ACT monitor, i-Channel information with the sub-display. Press the side key when nothing is displayed, the clock appears. counterclockwise more than 90-degree.
F-01C_EN_ninshou Precautions (ALWAYS FOLLOW THESE DIRECTIONS) ・ Before using your FOMA terminal, or when necessary, read the DANGER WARNING CAUTION This sign denotes that death or serious injury may directly result from improper use. This sign denotes that death or serious injury may result from improper use. This sign denotes that minor injury or damage to property may result from improper use. ・ The symbols below show specific directions. This symbol denotes that the action is prohibited.
F-01C_EN_ninshou Handling FOMA terminal, battery pack, adapter, desktop holder and docomo UIM (common) Introduction DANGER Do not use, store, or leave the equipment in hot areas such as near Don’t flames or in areas under strong direct sunlight such as inside a vehicle. Keep conductive materials (metal pieces, pencil lead, etc.) from coming Don’t in contact with the charging jack or external connection jack. Do not put those materials inside the terminal.
F-01C_EN_ninshou Handling FOMA terminal WARNING Do Do not direct the infrared data port toward home electric appliances etc. Don’t equipped with infrared device when using infrared communication. May cause an accident because of malfunction of infrared device. Do May impair eyesight. And may cause accidents like injury etc., by dazzling or astounding other people. Do not put foreign objects such as liquid like water, metal pieces or Don’t burnable things into docomo UIM or microSD card slot.
F-01C_EN_ninshou CAUTION Do not swing FOMA terminal by antenna or its strap. Don’t Introduction Do not use damaged FOMA terminal. May cause fire, burns, injuries, electric shock. Don’t Do When using the motion tracking or motion sensor, check the safety Don’t around you, hold FOMA terminal firmly, and do not shake it unnecessarily. May cause accident such as injuries.
F-01C_EN_ninshou Be careful not to let your pet bite the battery pack. Do May cause battery pack to ignite, burst, heat or leak. Handling adapter and desktop holder May cause igniting or environmental destruction. Tape the terminals of old battery packs to insulate them, and then bring them into a sales outlet such as docomo Shop. If your local municipality has a battery recycling program, dispose of them as provided for. Do not use or charge a wet battery pack.
F-01C_EN_ninshou Do When you disconnect the adapter from the outlet or cigarette lighter socket, do not pull the adapter cord with excessive force. Instead, hold the power plug to disconnect. Introduction May cause fire, burns, electric shock. Always remove the power plug from the outlet or cigarette lighter when Unplug not using the adapter for an extended period.
F-01C_EN_ninshou Material list Part Material Surface treatment Movable PC+ABS part resin Display UV hard coating Movable Acrylate part Rear resin surface UV hard coating Fixed part PA-GF resin UV hard Keypad coating Fixed part PC+ABS Battery resin UV hard coating Back cover UV hard coating PC+ABS resin Back POM resin cover lock lever None Back Stainless cover steel inside lock plate None Back cover (body) Stainless steel None Back cover (gasket) Silicon rubber (VMQ) None Main display
F-01C_EN_ninshou Handling precautions General Introduction 14 FOMA terminal ・ F-01C is waterproof/dustproof, however, do not allow water or dust to seep ・ Do not press the surface of the touch panel strongly or operate it with sharp into FOMA terminal and do not allow accessories or optional devices to get wet or let dust attach. - Battery pack, adapter, docomo UIM are not waterproof/dustproof. Do not use in a bathroom or other highly humid area or do not let rain attached.
F-01C_EN_ninshou ・ Do not put strong impact on the fingerprint sensor or scratch its surface. Battery pack ・ The battery pack is a consumable part. - Replace the battery pack if FOMA terminal has extremely short operation time on a full charge, though it may vary by operating conditions. Purchase a new battery pack of the specified type. ・ Charge the battery in an area within the proper ambient temperature range (535℃).
F-01C_EN_ninshou Bluetooth® devices ・ This FOMA terminal is equipped with the security features, that are compliant Introduction with Bluetooth standards for communication via Bluetooth. However, depending on the settings, there may not be enough security. Be aware of security risks when using Bluetooth. ・ DOCOMO assumes no responsibility for any information which may be leaked during communication via Bluetooth.
F-01C_EN_ninshou FeliCa reader/writer ・ FeliCa reader/writer function of FOMA terminal uses weak waves requiring no licenses for radio stations. ・ It uses 13.56 MHz frequency band. When using other reader/writers in your surroundings, keep FOMA terminal away sufficiently from them. Before using the FeliCa reader/writer, confirm that there are no radio stations using the same frequency band nearby. FM transmitter CAUTION ・ Do not use a remodeled FOMA terminal.
F-01C_EN_ninshou Waterproofness/Dustproofness Introduction F-01C provides waterproofness of IPX8*3 which exceeds IPX5 (former JIS protection code 5)*1, IPX7 (former JIS protection code 7)*2 and dustproofness of IP5X (JIS protection code 5)*4 with firmly closing the external connection jack cap and HDMI connection jack cap and installing the back cover in a locked state. *1 IPX5 means that a phone keeps functioning after applying a jet flow of 12.5 L/min.
F-01C_EN_ninshou ・ Install the back cover as described below. Align 8 tabs of the back cover with concaves of FOMA terminal. While pressing the back cover in the direction of a so that there is no gap between FOMA terminal and back cover, slide the back cover in the direction of b to install, then slide the back cover lever in the direction of c to lock. Back cover ・ Securely lock the back cover and firmly close the external connection jack cap/HDMI connection jack cap.
F-01C_EN_ninshou Introduction 20 Observe the following precautions to use FOMA terminal properly. ・ If FOMA terminal gets wet with water or other liquids with the ・ Accessories and optional devices are not waterproof/dustproof. external connection jack cap/HDMI connection jack cap or the back cover open, the liquid may get inside the terminal causing electric shocks or malfunction. Stop using FOMA terminal, turn the power OFF, remove the battery pack and contact a DOCOMO-specified repair office.
F-01C_EN_ninshou ・ Do not apply water flow stronger than allowed (⇒P18) (e.g., such Draining water from FOMA terminal When FOMA terminal is wet, water may flow out after wiping it off; drain the water in the following steps. a Wipe moisture on FOMA terminal surface off with dry, clean cloth etc. b Shake FOMA terminal approximately 20 times, firmly holding its hinge section, until there is no more water splattering.
F-01C_EN_ninshou Charging Check the following before and after charging. ・ Check if FOMA terminal is not wet. Never try to charge the battery pack when FOMA terminal is wet. Introduction 22 ・ Accessories and optional devices are not waterproof/dustproof. ・ When charging the battery when or after FOMA terminal is wet, adequately drain it and wipe off water with a dry, clean cloth etc., before connecting the accessory desktop holder or opening the external connection jack cap.
F-01C_EN_ninshou Before Using Attaching docomo UIM/battery pack After turning power OFF, close FOMA terminal and hold it in your hand so that you can properly attach UIM/battery pack. slide the battery pack in the direction a, press the battery pack in the direction b to set it in.
F-01C_EN_ninshou Before Using Charging The battery pack does not have a full charge at time of purchase. Use AC adapter for FOMA terminal to charge the battery before using FOMA terminal.
F-01C_EN_ninshou Before Using Before Using Turning power ON - Configuring default setting Checking Profile Initial setting is an operation when FOMA terminal is turned ON for the first time. Check a model name or own phone number. For details of checking/changing a mail address, refer to "Mobile Phone User's Guide [i-mode] FOMA version". a f (2 sec. or more) a me0 Profile The screen shown to the right appears. The screen shown to the right appears.
F-01C_EN_ninshou Screen Explanation Viewing display Basic Operation 26 The current state can be checked by the icon appearing on the screen. Major icons are as follows.
F-01C_EN_ninshou Screen Explanation Menu operation On the stand-by display, press m and then perform the functions from the menu. You can select a menu item with shortcut operations, which use the keypad, * and #, or with multi-cursor operation, which uses the multi-cursor key to move the cursor.
F-01C_EN_ninshou Screen Explanation Using touch panel Operate by touching the display directly. Notes for using the touch panel Basic Operation ･ Do not put excessive force when opening, closing or rotating the FOMA terminal. Doing so may cause malfunction or damage of the keys or the display. ･ The touch panel is designed for being touched lightly with fingers. Do not push it forcibly with a finger or press it with sharp objects such as nail, ballpoint pen, pin, etc.
F-01C_EN_ninshou Caller ID notification (At subscription : Notify) You can notify your phone number (caller ID) to the other party's terminal when making a voice call. a meg TEL functioned Dial/Receive call settinge c Caller ID notificationeb Settingea ON Select "b OFF" if you do not want to notify. Point whether you want to include caller ID information when making a call.
F-01C_EN_ninshou Appendix Specific absorption rate (SAR) of mobile phone This model phone FOMA F-01C meets the MIC's*1 technical regulation governing exposure to radio waves. The technical regulation established permitted levels of radio frequency energy, based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The regulation employs a unit of measurement known as the Specific Absorption Rate, or SAR.
F-01C_EN_ninshou Federal Communications Commission (FCC) Notice ･ This device complies with part 15 of the FCC rules. ･ Operation is subject to the following two conditions : a this device may not cause harmful interference, and b this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made in or to the radio phone, not expressly approved by the manufacturer, will void the user's authority to operate the equipment.
F-01C_EN_ninshou If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
F-01C_EN_ninshou Appendix Export Administration Regulations/Intellectual Property Right Export Administration Regulations This product and its accessories may be under coverage of the Export Administration Regulations of Japan ("Foreign Exchange and Foreign Trade Control Laws" and the related laws and regulations). When exporting this product and its accessories, take necessary procedures on your responsibility and expense. For details, contact Ministry of Economy, Trade and Industry of Japan.
F-01C_EN_ninshou ･ QuickTime is a registered trademark of Apple Inc., in the US and other ･ ･ ･ ･ ･ ･ ･ ･ ･ ･ ･ ･ ･ Wi-Fi CERTIFIED™, WMM™, WPA™, WPA2™ and Wi-Fi Protected Setup™ are trademarks of Wi-Fi Alliance. ･ AOSS™ is a trademark of BUFFALO INC. ･ IrSimple™, IrSS™ and IrSimpleShot™ are trademarks of Infrared Data Association®. ･ Blu-ray Disc and its logo are trademarks. ･ HDMI and HDMI logo are trademarks and registered trademarks of HDMI Licensing, LLC.
F-01C_EN_ninshou Others ･ This product contains a module developed by the Independent JPEG Group. ･ FeliCa is a contactless IC card technology developed by Sony Corporation. ･ This product is equipped with the technologies of GestureTek, Inc. Copyright© 2006-2010, GestureTek, Inc. All Rights Reserved. ･ OMRON Corporation's Mobile OmCR is used for a character recognition engine. ･ This product contains software licensed based on Apache License V2.0.
General Inquiries 0120-005-250 (toll free) * Service available in: English, Portuguese, Chinese, Spanish, Korean. * Unavailable from part of IP phones. Repairs ■ From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) ■ From land-line phones (In Japanese only) 0120-800-000 (toll free) (Business hours : 9:00 a.m. to 8:00 p.m.) * Unavailable from land-line phones, etc.
