User's Manual

F-01D_EN_ninshou.pdf
Contents/Precautions
13
・ Do not leave the Xi terminal with the camera in areas
under strong direct sunlight.
- May cause discoloring or burn-in of elements.
・ Use the Xi terminal with the external connection jack
cap and slot cap closed.
- Dust and/or water brought into the Xi terminal cause
troubles.
・ While microSD card is being used, do not take the card
out and do not turn off the Xi terminal.
- May cause data loss or malfunction.
・ Do not bring magnetic cards etc. close to Xi terminal.
- Magnetic data in cash cards, credit cards, telephone
cards, floppy disks, etc. may be erased.
・ Do not bring magnetized objects close to the Xi
terminal.
- Bringing strong magnetism close may cause a
malfunction.
・ The internal battery is a consumable part.
- Replace the internal battery if the Xi terminal has
extremely short operation time on a full charge,
though it may vary by operating conditions. For
replacement of the internal battery, contact "Repairs"
on the last page of the instruction manual (in Japanese
only) or a DOCOMO-specified repair office.
・ Charge the battery in an area within the proper ambient
temperature range (5-35 ℃ ).
・ The operation time provided by the internal battery
varies by the operating environment and internal
battery's deterioration.
・ Be careful especially about the following points when
preserving the internal battery.
- Keeping under the state of the full charge (right after
charging ends)
- Keeping under the state of the empty charge (too
exhausted to turn on the Xi terminal)
They may cause the internal battery performance to be
degraded or its lifetime to be shortened.
A recommended battery level to keep the battery pack is
approximately 40 % of remaining battery level as a
guide.
◆ Adapter
・ Charge the battery in an area within the proper ambient
temperature range (5-35 ℃ ).
・ Do not charge the battery in the areas below.
- In areas of excessive humidity, dust or vibrations
- Near land-line phones or TVs/radios
・ It is normal for the adapter to become hot while
charging. Continue to use it.
・ When using the DC adapter for charging, keep the
vehicle engine running.
- The vehicle's battery could become flat.
・ When using an outlet with a mechanism preventing
unplugging, follow the handling instructions for that
outlet.
・ Do not give strong shock. Do not deform the charging
jack.
- May cause malfunction.
◆ miniUIM
・ Do not use excessive force to install/remove miniUIM.
・ Note that DOCOMO assumes no responsibility for
malfunctions occurring as the result of inserting and
using miniUIM with another IC card reader/writer.
・ Always keep UIM ICs clean.
・ Clean UIM with a soft, dry cloth (such as a cloth for
eyeglasses).
・ Maintain a separate record of the data you saved in
miniUIM.
- If the data is deleted, DOCOMO assumes no
responsibility for the loss of any data.
・ To preserve the environment, bring the old miniUIM to
a sales outlet such as docomo Shop.
・ Take care not to scratch, touch accidentally or short IC.
- May cause data loss or malfunction.
・ Do not drop miniUIM or subject it to shocks.
- May cause malfunction.
・ Do not bend miniUIM or place heavy objects on it.
- May cause malfunction.
・ Do not install miniUIM into the Xi terminal with a label
or sticker put on.
- May cause malfunction.