User's Manual

Contents/Precautions
7
◆ Handling docomo mini UIM card
CAUTION
Be careful of the cut surface when removing
docomo mini UIM card.
May cause injuries.
◆ Handling mobile phones near
electronic medical equipment
WARNING
Wearers of medical equipment such as
implanted pacemakers or defibrillators must
carry and use the terminal at least 15 cm away
from the implanted device.
The terminal's signals may affect the performance of
electronic medical equipment.
When electronic medical equipment other than
implanted pacemakers or defibrillators are in use
outside of medical facilities (such as in home care
settings), check with the device manufacturer to
determine how the device is affected by
electrical signals.
The terminal's signals may affect the performance of
electronic medical equipment.
When you are in a crowd etc. and you have
difficulties to keep a distance of 15 cm or more
from others, turn the airplane mode on or power
off the terminal not to transmit signals.
There may be wearers of medical equipment such as
implanted pacemakers or defibrillators around you.
The terminal's signals may affect the performance of
electronic medical equipment.
When using the terminal in a medical facility, be
sure to observe the regulations of the facility.
◆ Material list
■ F-02J Body
Do
Do
Do
Do
Do
Part
Material/Surface
treatment
Exterior case Movable part
Back-Display
PC-GF resin/Acrylic UV
curable coating
Movable part
Display
PA-GF resin/Acrylic
UV curable coating
Fixed part PC-GF resin/Acrylic UV
curable coating
Hinge part
Fixed side
PC+ABS-GF resin/
Acrylic UV curable
coating
Back cover
PC-GF resin
＋
elastomer resin/Acrylic
UV curable coating
Display panel Acrylic resin/Acrylic
UV curable coating
Back panel Acrylic resin/Acrylic
UV curable coating
Camera panel Acrylic resin/Acrylic
UV curable coating
Side button PC resin/Acrylic UV
curable coating
Operation button PC resin/Acrylic UV
curable coating
Decorative sheet around operation
button
PET resin and urethane
acrylate-based UV
curable coating/None
One-touch dial button PC resin/Acrylic UV
curable coating
External
connection jack
cap
Body PC resin/Acrylic UV
curable coating
Flexure Elastomer resin/None
Tabs Elastomer resin/None
Water stop Silicon rubber/None
External connection jack Stainless steel/Tin
plating
Battery contacts Battery contacts
connector body
PPS resin/None
Battery contacts Beryllium copper/Gold
plating (base: Ni-Pd
plating)
Screw (battery install recess) Stainless steel/None
Battery contacts Metal part Stainless steel/Nickel
plating
Inscription
sticker
PET resin/None
Battery pack Battery pack
body
PC resin/None
Contact Copper/Nickel plating
+ gold plating