User Manual

Table Of Contents
Before using the terminal
29
Charging with AC adapter
Charge the terminal with FOMA AC Adapter 01/02
(optional) and the included FOMA charging microUSB
adapter T01.
a
Insert the AC adapter connector to the external
connection jack of the FOMA charging microUSB
adapter
b
Open the jack cap (
a
) of the terminal, insert the
microUSB plug of the charging microUSB adapter into
the jack (
b
)
c
Insert the AC adapter power plug into an outlet
Notification LED lights red while charging, and turns
off when charging is complete.
d
After charging is completed, remove the microUSB
plug from the terminal, and close the external
connection jack cap
e
Remove the AC adapter connector from the charging
microUSB adapter
Pull it straight while pressing the release button of
the connector.
f
Remove the AC adapter power plug from the wall outlet
INFORMATION
FOMA charging microUSB adapter T01 is an adapter for
connecting the terminal with the AC adapter. If you
connect the terminal with a PC using the FOMA USB
Cable etc., you cannot send/receive data or charge the
terminal. For connection to a PC, use the included USB
Cable for PC connection T01.
Charging with FOMA USB Cable for
PC connection
If you connect the terminal with a PC using the included
USB Cable for PC connection T01, you can charge the
terminal.
When "
新しいハードウェアの検索ウィザードの開始
(New
hardware detection wizard)" appears on the PC, select "
キャンセル
(Cancel)".
Turning power ON
1
Press and hold
X
(approx. 2 sec.) until the
notification LED lights green
The lock screen appears following the startup screen.
2
Slide at the bottom of the lock screen
right or left
Lock screen
P33
Turning power ON for the first time
Follow the onscreen guidance to make initial settings You
can change the settings later.
P31
Turning power OFF
1
Press and hold
X
until the phone options
menu appears
[Power off]
[OK]
After vibrating once, the terminal turns off.
Turning power ON/OFF