User's Manual

F-07B_EN_FCC
24
Basic Operation
Screen Explanation
Pointing device
With the fingerprint sensor, you can operate menus or browser
screens with your finger. Pointing device operation corresponds to
multi-cursor key operation as follows.
Set the effective area and speed of the pointing device.
a meh Settings & NWservices eg Clock/Turn/
Input etc.
eh Pointing device e Set required items e
C
[Set]
When "Not use" is set, you can use the fingerprint sensor only
for fingerprint authentication.
Point
･ You cannot operate on the stand-by display (except in Focus mode) or on
the screen while talking.
･ Operate the pointing device with a light touch. Putting your finger nail or
excessive force on the fingerprint sensor may damage it.
Pointing device Multi-cursor key
Slide
Keep touching the fingerprint sensor, move
your finger up, down, right or left.
k
Slide your finger and keep touching the
fingerprint sensor
k (1 sec. or more)
Double-tap
Tap twice as you can put the ball of your
finger on the center of fingerprint sensor as
parallel as possible.
g
Keep touching the fingerprint sensor for 1
sec. or more
This operation is for the browser screen only.
g (1 sec. or more)
Double-tapSlide
Setting the pointing device