User Manual Part 4

Before Using the Handset
42
F-08A_E1kou
✔ INFORMATION
･ When data subject to UIM operation restriction is set as stand-by display, incoming/
outgoing image, ring alert, etc., replacing UIM with another one or using FOMA
terminal without UIM installed causes the sound and image settings to be reset to the
default state. In this case, sound or image actually generated or displayed may be
different from those set. If UIM used when downloading the data is installed, UIM
operation restriction of the data is canceled and the original settings are restored (when
data is used for Set random image on stand-by display, settings may be canceled).
･ UIM operation restriction is not set to data obtained via infrared communication, iC
transmission, microSD card or DOCOMO keitai datalink or still images/moving pictures
taken with the built-in camera.
･ The following settings are saved to UIM.
- My phone number
- SMS settings (except "SMS report request")
- DOCOMO Cert/User certificate of Manage certificate
- バイリンガル (Select language), UIM, PLMN setting
◆ Settings when replacing UIM
If replacing the currently installed UIM with another UIM, the following settings are
changed.
Setting Changed contents
My phone number , バイリンガル (Select
language), SMS settings (except "SMS
report request"), "DOCOMO Cert"/"User
certificate" of Manage certificate, PIN
code and PIN2 code of UIM, PIN1 code
ON/OFF, PLMN setting
Changed to the contents saved in the inserted
UIM.
i-Channel setting, Reset call cost,
i-Widget roaming set
Restored to the default settings.
FullBrowser usage Set to "No" regardless of the setting before
replacement.
Cookie setting of i-mode and Full
Browser
Set to "Invalid" regardless of the setting before
replacement. Cookie information is retained,
but if setting to "Valid" again, a confirmation
screen for deleting Cookie information
appears.
Set program of Music&Video Channel The setting before replacement is canceled.
Set the program again if necessary.
L03.fm Page 42 Friday, March 27, 2009 4:15 PM