User's Manual

F-08B_EN_FCC
23
Basic Operation
Before Using
Turning power ON - Configuring default setting
Perform the following operations after turning the power ON for
the first time.
a f (2 sec. or more)
b "Yes" or "No" on a confirmation
screen of enlarged menu setting
The screen shown to the right appears.
c Set required items eC
[Complete]
Always set Change security code and
Request permit/deny. If you exit without
setting, Initial setting screen reappears
when the power is turned ON the next
time.
d g on a confirmation screen of software update
function
The stand-by display appears.
Point
･ If no operation is performed, the display light is turned off automatically
according to the settings in Light time-out or Power saver setting. The
display light turns on again if there is any operation or incoming call.
Turning power off : f (2 sec. or more)
Changing the initial setting : mehgeg
Changing screen display to English : mehbfce Select "English"
<Initial setting screen>
Before Using
User information
Check your own phone number.
For details of checking/changing a mail address, refer to "Mobile
Phone User's Guide [i-mode] FOMA version".
a me0 User information
The screen shown to the right appears.
Point
Editing user information : On User information edit screen, Ce
Authenticate e Edit eC
Checking a phone number during a call : se0
<User information
screen>