User Manual Part 5

55
Before Using the Handset
F-09A_E1kou
❖ Charging using AC adapter or Desktop holder
Read the respective instruction manual when using the optional FOMA AC adapter,
DC adapter or Desktop Holder.
･ The battery pack cannot be charged without FOMA terminal. When charging the
battery pack, install it to FOMA terminal.
■ Using desktop holder and AC adapter in combination for charging
a Insert the AC adapter to the desktop holder, with the arrow on the AC adapter's
connector upward.
b Unfold the AC adapter's power plug and insert it into a 100V AC outlet.
c With FOMA terminal closed, align the charging terminal of FOMA terminal with
the charging jack of the desktop holder, and press the terminal in the direction
of the arrow until it clicks.
d After charging is completed, hold the desktop holder and remove FOMA
terminal.
■ Charging the battery using AC adapter only
a Open jack cap ( a ) of FOMA terminal, hold the connector horizontally with the
arrow side upward and insert it to the jack. (
b )
b Unfold the power plug and insert it into a 100V AC outlet.
c When charging is over, pull out the power plug from the outlet, and pull out from
FOMA terminal horizontally while pressing the release buttons on both sides of
the connector.
❖ Charging in a car
By using FOMA DC Adapter 01/02 (optional), charging is available in a car.
･ For details, refer to the operation manual of DC adapter.
･ When FOMA terminal is not used or you are leaving the car, disconnect the
cigarette lighter plug of the DC adapter from the cigarette lighter socket and
disconnect the DC adapter connector from FOMA terminal.
･ The fuse (2A) of the DC adapter is a consumable part. Contact your nearest
automotive supply store for a replacement.
AC adapter
100V AC
outlet
Power plug
Connector
Release button
Light
Insert at the back side
Desktop holder Charging jack
Connector
Light
Release
button
Jack cap
External
connection jack
AC adapter
Power plug
100V AC
outlet
L03.fm Page 55 Tuesday, March 10, 2009 6:30 PM