User Manual Part 5

Before Using the Handset
58
F-09A_E1kou
Power ON/OFF
Turning power ON/OFF
❖ Turning power ON
1
f (2 sec. or more)
The wake-up screen appears and the stand-by display appears. appears at
the bottom of the display while reading UIM.
･ An antenna icon appearing at the top of the display shows the approximate
received signal level.
･ The battery icon set by default varies by the color of FOMA terminal.
･ When you turn the power ON after installing the battery pack, a message
indicating it appears.
❖ Turning power OFF
1
f (2 sec. or more)
◆ Operations to perform after turning the power ON at the
first time
When turning the power ON for the first time, operate in the order of " 拡大メニュー
の設定
(enlarged menu setting)" → "Initial setting". The settings made can be
changed later.
･ When initialization is finished, a confirmation screen of software update function
appears. Press
g to display the stand-by screen.
❖ Enlarged menu setting
1
"Yes" or "No" on the confirmation screen
･ When selecting "Yes", " 拡大メニュー (enlarged menu)" of Kisekae Tool is set.
If you cancel the confirmation screen by pressing
c or f , the
confirmation screen reappears when the power is turned ON the next time.
❖ Default setting
･ Always set Password and Request permit/deny. When C or c , f is
pressed before setting terminal security code or Request permit/deny, a
confirmation screen appears asking you to exit. If you exit by selecting "Yes", this
confirmation screen reappears when the power is turned ON the next time.
･ On the stand-by display, initial setting screen is also displayed by pressing m
[Settings & NW services]
768 .
1
Set required items on Initial setting screen eC
Date & time : Set the date and time. → P59
Password : Change the terminal security code after performing authentication.
→ P111
Fingerprint : After performing authentication, register the fingerprint to be used
for authentication.
→ P113
Key/touch sound : Set a confirmation sound emitted when a key is pressed or
touch operation is performed.
→ P94
Text size : Set size of characters for phonebook, mail, etc. → P107
Request permit/deny : After performing authentication, set if you provide
location information. To permit the location request in a specified period, set
the permission period in Request permit/deny.
→ P294
Pointing device : Set effective area and speed. → P48
Stand-by display
Antenna icon
Received
signal level
Icon
Strong Weak
Out of service area or where
radio waves do not reach
L03.fm Page 58 Tuesday, March 10, 2009 6:30 PM