User's Manual

F-09B_EN_ninshou
57
Before Using the Handset
Date & time setting
Setting date and time
You can set so that time can be adjusted automatically based on the time information from DOCOMO
network, you can adjust date and time manually (usually, you do not need to adjust time and date
manually). <
日付時刻設定 (Date & time setting)>
･ When selecting " 自動で設定する (Set automatically)", date and time are adjusted when time
adjustment information is received from the network of a carrier in use. And, when using overseas,
you can adjust the time differences manually, or adjust to daylight saving time.
→ p.478
<Example> Setting date and time manually
1
On the stand-by display, m e " * 設定を行う (Set)" e " i 時計を設定する (Set
time)"
e Press " a 日付と時刻を設定する (Set date and time)"
2
Press " b 手動で設定する (Set manually)"
■ Adjusting time automatically : Press " a 自動で設定する (Set automatically)"
A message appears indicating that date and time are adjusted automatically. Press g to
return to the menu screen.
3
Press " a 日時 (Date and time)"
4
Enter date
･ Enter lowest 2 digits for Christian year. If the number of month or day is 1
digit, put 0 before the number.
･ You can set from 2000/1/1 to 2050/12/31.
･ lr : Change selection position.
･ ud : Switch entry of date and time.
5
Enter time
･ Set time in 24 hours (00:00-23:59). If the number of hour or minute is 1 digit, put 0 before the
number.
･ lr : Change selection position.
･ ud : Switch entry of date and time.
L03.fm Page 57 Monday, May 31, 2010 4:46 PM