User's Manual

F-09B_EN_ninshou
61
Before Using the Handset
2
p e Enter terminal security code e Press g
･ If the mail address is automatically acquired in Step 1, the terminal security
code entry screen is not displayed.
3
Enter a name e Press g
Reading of the entered name is automatically entered.
･ Up to 16 two-byte or 32 one-byte characters can be entered. Kanji,
Hiragana, Katakana, alphabets, numbers, symbols and pictograms can be
entered.
4
Check or edit the reading e Press g
A confirmation screen appears asking if you enter the second phone number.
･ Up to 32 one-byte characters can be entered. One-byte katakana, one-byte alphabetic, one-byte
numeric and one-byte symbol can be entered.
5
Press " a 入力する (Enter)" or " b 入力しない (Not enter)"
･ " a 入力する (Enter)" : Register a phone number other than your own phone number.
･ " b 入力しない (Not enter)" : Not register a phone number other than your own phone number.
Go to Step 8.
6
Enter a phone number e Press g
A confirmation screen appears asking whether you enter the third phone number.
･ Up to 26 digits can be entered.
7
Press " a 入力する (Enter)" or " b 入力しない (Not enter)"
･ " a 入力する (Enter)" : Register other phone number. Go to Step 8 after Step 6.
･ " b 入力しない (Not enter)" : Not register other phone number.
8
Press any of " a 自動で取得する (Acquire automatically)" to " c 入力しない
(Not enter)"
･ " a 自動で取得する (Acquire automatically)" : Acquire mail address automatically. Press g
when a message indicating the acquisition of mail address appears. Go to Step 10.
･ " b 直接入力する (Direct input)" : Register mail address by direct input.
･ " c 入力しない (Not enter)" : Not register mail address. Go to Step 11.
L03.fm Page 61 Thursday, May 27, 2010 3:44 PM