User's Manual

F-09B_EN_ninshou
34
Before Using the Handset
Operating menu
Select and execute the functions from the menu screen displayed by pressing m on the stand-by
display or from the mail menu screen displayed by pressing
u . To select a function, you can either
press multi-cursor button (cross button) or dial button. In this manual, the operation methods are
explained mainly by the way of pressing dial button (short-cut operation).
･ For available functions, see "Menu list". → p.490
･ If you select the function when any locking function is set or UIM is not installed, the reason why the
function cannot be performed is displayed. For submenu, functions that cannot be performed are
grayed out and they cannot be selected.
･ When setting the menu design of menu format selection to " タイル (Tile)", the item names displayed
by pressing
m on the stand-by display differs from the ones shown in this manual. And, the selection
method of multi-cursor button (cross button) also differs.
･ Selection of menu format and menu item name → p.133
Selecting function with multi-cursor button (cross button)
<Example> Performing " ボタンを押した時の音を設定する (Setting the sound emitted when a
button is pressed)"
1
Press m on the stand-by display
The menu screen appears.
a Page
A number of the displayed page and total pages are displayed.
b Cursor
The color of the selected function changes.
c Indicates that the menu of lower layer exists.
d Appears when there is a continued part of the displayed menu
screen.
To display the continued part, press ud several times to move
the cursor, or press
lr to switch the screen.
When selecting a function from a list-format menu
b
a
c
d
L03.fm Page 34 Thursday, May 27, 2010 3:44 PM