User's Manual

F-10B_EN_ninshou
22
Basic Operation
Before Using
Charging
The battery pack does not have a full charge at time of purchase.
Use AC adapter for FOMA terminal to charge the battery before
using FOMA terminal.
a Insert the AC adapter to the attached desktop holder,
with the arrows on the AC adapter's connector upward
b Unfold the AC adapter's power plug and insert it into a
100V AC outlet
c With FOMA terminal closed, insert it into the attached
desktop holder
* Check that the light turns on.
d After charging is completed, remove FOMA terminal
from the desktop holder
a Open jack cap ( a ) of FOMA terminal, hold the
connector horizontally with the arrows side upward
and insert it to the jack ( b )
b Unfold the power plug and insert it into a 100V AC
outlet
* Check that the light turns on.
c When charging is over, pull out the power plug from
the outlet, and pull out from FOMA terminal
horizontally while pressing the release buttons on both
sides of the connector
✜ Operations for charging
When charging starts, a charge start alert sounds. While charging, the
light turns on and the battery icons on the display and the sub-display
blink. When charging is over, a charge completion alert sounds.
Charging using desktop holder in
combination
100V AC outlet
Light
Release
buttons
Connector
Desktop holder
Insert at the back side
AC adapter
Power plug
Charging using AC adapter
Connector
Release buttons
External
connection
jack
Jack cap
Power plug
AC adapter
100V AC outlet
Light