P3PC-E917-02EN fi-4120C2 Image Scanner Getting Started
CONTENTS ■ Regulatory Information ........................................................ ii ■ Note, Liability ....................................................................... iv ■ Safety Precautions ................................................................ v Chapter 1 PREPARING THE SCANNER.................................. 1 1.1 Checking the Contents of the Scanner Package............. 1 1.2 Names and Functions of Parts.......................................... 1 1.3 Operator Panel.......
INTRODUCTION Thank you for purchasing the fi-4120C2 Duplex Color Scanner product. This document describes how to handle fi-4120C2 Duplex Color and basic operation methods. Before you start using fi-4120C2 Duplex Color be sure to thoroughly read this manual to ensure correct use. The "Operator’s Guide" is stored on the Setup Disk. The guide provides useful and detailed information on Operations when you would like to using advanced features, daily maintenance of the scanner, replacement of consumables.
other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos ( among participating nations.
Manufacturer Symbols Used In This Manual PFU LIMITED International Sales Dept., Imaging Business Division, Products Group Solid Square East Tower, 580 Horikawa-cho, Saiwai-ku, Kawasaki-shi Kanagawa 212-8563, Japan Phone : (81-44) 540-4538 ATTENTION This symbol alerts operators to particularly important information. Be sure to read this information. This symbol alerts operators to helpful advice regarding operation.
FUJITSU ISIS scanner driver, QuickScan™ image capturing software and Adobe® Acrobat®. About Maintenance The user must not perform repairs on this scanner. Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner service provider to have repairs done on this product. ■ Safety Precautions Wipe any dust from the power plug. Wipe off any dust from metal parts on the power plug or metal fittings with a soft, dry cloth. Accumulated dust can cause fire or electric shock.
Do not use the scanner if you smell a strange odor. If you detect heat coming from the device or detect other problems such as smoke, strange smells or noises, immediately turn off the scanner and then disconnect its power plug. Make sure that any smoke coming from it has stopped, before contacting the store where you bought the scanner or an authorized FUJITSU scanner service provider. CAUTION Do not install the scanner on unstable surfaces.
Disconnect the power plug from the power outlet when the scanner is not used for a long period of time. When the scanner is not going to be used for a long period of time, be sure to disconnect the power plug from the power outlet for safety. Do not install the scanner in direct sunlight. Do not install the scanner under direct sunlight or near heating apparatus. Doing so might cause excessive heat to build up inside the scanner, which can cause scanner trouble or even fire.
Chapter 1 PREPARING THE SCANNER 1.1 Checking the Contents of the Scanner Package ■ Rear i When you open the scanner package, please handle the main unit and its attachments carefully. Make sure it contains all the parts listed in the package contents list that is included in the package box. This section describes the scanner parts and their functions. 23 901 1.2 Names and Functions of Parts 78 If any parts are missing or defective, contact your sales representative.
1.3 Operator Panel The operator panel is located on the right side of the scanner. This panel comprises of a Function Number display, four buttons and a LED. Function No. display Function Send to Scan Power button LED Name Function Function Number display Indicates the function Number and error status. Button Function Changes the Function activated by the Send to button (*). Send to Launches the linked application software (*). Scan LED Power button Turns the scanner ON and OFF.
Chapter2 INSTALLATION OF THE SCANNER 2.1 Installing the Scanner 2) Connect the AC adapter connector to the scanner’s DC inlet. 1. Place the scanner at its installation site. For details on the scanner's dimensions and required installation space, refer to "fi-4120C2 Operator’s Guide" "7.2 Installation Specifications" in the Setup CD-ROM. 2. Attach the ADF Paper Chute. Hold the ADF paper chute and insert its tabs into the corresponding slots in the scanner as shown in the figure below.
2. Connect the other end of the USB interface cable to the PC. • Be sure to use the USB cable which comes as an accessory with this scanner. Correct operation with commercially available cables is not guaranteed. • When connecting to an USB hub, use the first stage USB hub that is closest to the computer. If you use the second or later hub stages, the scanner may not operate correctly. • This scanner is provided with two interfaces: Ultra SCSI and USB 2.0 / 1.1.
2.3 Installing the Scanner Application Both the scanner driver and image capturing application software (called "application" hereafter) must be installed on your PC. Two types of drivers for scanner, FUJITSU TWAIN 32 Scanner Driver and FUJITSU ISIS Scanner Driver, as well as two software applications, ScandAll 21 and QuickScan Pro™, are provided with this product. The following sections describe how to install each driver and application.
8. Select a language used for installation on [Choose Setup Language] window and click [OK]. 5. Click [INSTALL PRODUCTS]. 9. Follow the instructions on the window to install the application. 10.When the [InstallShield Wiizard Complete] window appears, click [Finish]. 6. Click [TWAIN Driver] on the window below. 7. Error Recovery Guide Installation window appears. Error Recovery Guide is a software that displays troubleshooting information on screen when any scanner error occurs.
Installation of the scanner driver is completed. ATTENTION 3. Click [ScandAll 21] on the window below. To confirm whether the installation was successful, perform a scanning operation with an application that complies with the TWAIN regulations such as ScandAll 21. ■ Installing ScandAll 21 "Scandall 21" is an image capturing software that complies with the TWAIN standard. The FUJITSU TWAIN 32 scanner driver enables you to capture images with a FUJITSU image scanner fi-series product. ATTENTION 4.
2. Start ScandAll21. Select [Start] - [Programs] - [Scanner Utility for Microsoft Windows] - [ScandAll 21]. HINT 3. Specify the scanner (that you will use) Select [Select Source...]from the [Scan] menu of ScandAll 21. For details on [TWAIN driver], refer to the "FUJITSU TWAIN32 Scanner Driver User’s Guide" provided in the Setup CD-ROM. 7. Documents are scanned, and the scanned images are displayed on the [ScandAll 21] window. 4.
■ Installing the FUJITSU ISIS Scanner Driver 5. Click [INSTALL PRODUCTS]. Windows XP screenshots are used in this section as examples. The windows and operations may vary slightly depending on your OS. HINT 1. Press the power button to turn ON the scanner. 2. Turn your PC on and log on to Windows. ATTENTION When using Windows NT 4.0, Windows 2000 or Windows XP, log on as a user with "Administrator" privileges (privileges of the administrator of your PC). 6. Click [ISIS Driver] on the window below.
8. Select a language used for installation on [Choose Setup Language] window and click [OK]. ■ Installing QuickScan Pro™ "QuickScan Pro™" is an image capturing software that complies with the ISIS standard. The FUJITSU ISIS scanner driver enables you to capture images with a FUJITSU image scanner fi-series product ATTENTION 9. Follow the instructions on the window to install the application. 10.When the [InstallShield Wiizard Complete] window appears, click [Finish]. 11.
4. Continue to install the application following the instructions on the window. From the [Start] menu, select [Programs]-[QuickScan]-[QuickScan]. 3. Select [Select Scanner...] from [Scan] menu in QuickScan Pro™. And, select fi-4120C2 from the list of [Scanner:], and then click the [OK] button. 5. Enter the required information, then click [Next >] button. ATTENTION "QuickScan Pro™" included in the Setup CD-ROM is an evaluation version.
HINT Refer to "QuickScan Overview" or "QuickScan Help" for information about QuickScan Pro™ functions and operations. On the [Start] menu, point to [Programs]-[QuickScan] and click the file. 4. Select a language to use for the installation in the window and click [OK]. 5. Install the application following the instructions in the window.
HINT Adobe Acrobat is required for displaying the manuals stored in the CDROM. * Installation of Adobe Acrobat 6.0 is not necessary if it has already been installed in your PC. 4. After the setup screen displays, proceed with the instructions on the screen to perform the installation. HINT 1. Insert the Adobe Acrobat 6.0 CD-ROM into your CD-ROM drive. The CD-ROM is automatically recognized and the "Adobe Acrobat 6.0 AutoPlay" screen will be displayed.. ATTENTION The
Appendix 1 TROUBLESHOOTING ■ Troubleshooting checklist Symptom Scanner does not turn on. Check this item Remedy Have you pressed the power button on? Push the power button in to turn the scanner. Are the AC cable and AC adapter properly connected to the scanner? Correctly connect the AC cable and the AC adapter. Are you using the correct AC cable and AC adapter supplied with the scanner from the manufacture? You must use the AC adapter and cable supplied with your scanner by the manufacture.
Symptom Paper frequently multi feeds. Paper does not feed (pick error occurs frequently, or document stops midway).
■ Temporary error Indication ■ Device alarm (Non-Temporary error) Meaning Indication Meaning U1 Paper feed error E2 Trouble in the optical system (front). U2 Multi Feed error E3 Trouble in the optical system (back). U4 The ADF cover is opened. E4 The motor’s fuse has blown out. U6 Print cartridge not installed E5 The imprinter’s fuse has blown out. E6 Trouble with the operator panel. E7 Trouble occurred with the EEPROM. E8 The SCSI interface fuse has blown out.
Appendix 2 DAILY CARE WARNING •When operating the scanner, the ADF’s inside glass becomes very hot. Before you clean inside the scanner, turn off its power and unplug the AC adapter from the outlet. Wait for at least 15 minutes. Do not turn off the scanner when you clean the Feed rollers or Eject rollers.
Appendix 3 REPLACING CONSUMABLES WARNING During its operation, the inside glass of the ADF becomes very hot . Before replacing the consumables, turn its power off and unplug the AC adapter from the outlet. Wait at least 15 minutes. The illustration below demonstrates the locations of the replacement parts. Refer to "Chapter 4 Replacing Consumables" fi-4120C2 Operator’s Guide on the Setup CD-ROM.
fi-4120C2 Image Scanner Getting Started P3PC-E917-02EN Date of issuance: October, 2009 Issuance responsibility: PFU LIMITED Copying of the contents of this manual in whole or in part and copying of the scanner application is forbidden under the copyright law. z The contents of this manual are subject to change without notice. z PFU LIMITED.