Scanner User Manual

3
Chapter2 INSTALLATION OF THE SCANNER
2.1 Installing the Scanner
1. Place the scanner at its installation site.
For details on the scanner's dimensions and required
installation space, refer to "fi-4120C2 Operator’s
Guide" "7.2 Installation Specifications" in the Setup
CD-ROM.
2. Attach the ADF Paper Chute.
Hold the ADF paper chute and insert its tabs into the
corresponding slots in the scanner as shown in the
figure below.
The Side guides of the ADF paper chute have to face
up.
3. Connect the AC adapter.
1) Connect the AC cable to the AC adapter.
2) Connect the AC adapter connector to the scan-
ner’s DC inlet.
3) Plug the AC cable into the outlet.
2.2 Connecting the Scanner to
Your PC
When running Windows 95 or Windows NT 4.0, con-
nect the SCSI interface cable.
When running Windows 98, Windows Me, Windows
2000, or Windows XP, connect either the USB interface
cable or the SCSI interface cable.
■ Connecting the USB Interface Cable
1. Connect the USB interface cable to the USB
interface connector.
ATTENTION
Use only the AC adapter provided by
the manufacturer.
ADF paper chute
Tab
Side guide
HINT
The Function Number Display and the
LED may flash for an instant when
plugging the AC cable into the scanner.
ATTENTION
Connect only one of the USB or SCSI
interface cables. Windows 95 and
Windows NT 4.0 do not support USB
interface.