fi-4220C2 Image Scanner P3PC-E937-02EN Getting Started fi-4220C2 Image Scanner Getting Started
CONTENTS ■ Regulatory Information ........................................................ ii ■ Note, Liability ....................................................................... iv ■ Safety Precautions ................................................................ v Chapter 1 PREPARING THE SCANNER.................................. 1 1.1 Checking the Contents of the Scanner Package............. 1 1.2 Names and Functions of Parts.......................................... 1 1.3 Operator Panel.......
INTRODUCTION Thank you for purchasing the fi-4220C2 Duplex Color Scanner product. This document describes how to handle fi-4220C2 Duplex Color and basic operation methods. Before you start using fi-4220C2 Duplex Color be sure to thoroughly read this manual to ensure correct use. The "Operator’s Guide" is stored on the Setup Disk. The guide provides useful and detailed information on Operations when you would like to using advanced features, daily maintenance of the scanner, replacement of consumables.
other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos ( among participating nations.
Manufacturer Symbols Used In This Manual PFU LIMITED International Sales Dept., Imaging Business Division, Products Group Solid Square East Tower, 580 Horikawa-cho, Saiwai-ku, Kawasaki-shi Kanagawa 212-8563, Japan Phone : (81-44) 540-4538 ATTENTION This symbol alerts operators to particularly important information. Be sure to read this information. This symbol alerts operators to helpful advice regarding operation. HINT All Rights Reserved, Copyright© PFU LIMITED 20042009.
FUJITSU ISIS scanner driver, QuickScan™ image capturing software and Adobe® Acrobat®. About Maintenance The user must not perform repairs on this scanner. Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner service provider to have repairs done on this product. ■ Safety Precautions Wipe any dust from the power plug. Wipe off any dust from metal parts on the power plug or metal fittings with a soft, dry cloth. Accumulated dust might cause fire or electric shock.
Do not use the scanner if you smell a strange odor. If you detect heat coming from the device or detect other problems such as smoke, strange smells or noises, immediately turn off the scanner and then disconnect its power plug. Make sure that any smoke coming from it has stopped, before contacting the store where you bought the scanner or an authorized FUJITSU scanner service provider. CAUTION Do not install the scanner on unstable surfaces.
Disconnect the power plug from the power outlet when the scanner is not used for a long period of time. When the scanner is not going to be used for a long period of time, be sure to disconnect the power plug from the power outlet for safety. Do not install the scanner in the direct sunlight. Do not install the scanner under direct sunlight or near heating apparatus. Doing so might cause excessive heat to build up inside the scanner, which can cause scanner trouble or even fire.
Chapter 1 PREPARING THE SCANNER 1.1 Checking the Contents of the Scanner Package ■ Rear When you open the scanner package, please handle the main unit and its attachments carefully. Make sure it contains all the parts listed in the package contents list that is included in the package box. If any parts are missing or defective, contact your sales representative. Handle the scanner and accessories with care. 1.2 Names and Functions of Parts This section describes the scanner parts and their functions.
1.3 Operator Panel The operator panel is located on the right side of the scanner. This panel comprises of a Function Number display, four buttons and a LED. Function No. display Function Send to Scan Power button ■ Indications on the Function Number Display ■ 8 Blinks only one time upon turning on the scanner. ■ P Indicates that the scanner has been turned ON and is being initialized. ■ 0 Indicates that initialization will soon end.
Chapter 2 INSTALLATION OF THE SCANNER 2.1 Installing the Scanner ADF paper chute 1. Place the scanner at its installation site. Tab For details on the scanner's dimensions and required installation space, refer to "fi4220C Operator’s Guide" "7.2 Installation Specifications" in the Setup CD-ROM. 2. Unlock the Shipping lock. The carrier unit inside the scanner is fixed in place by the shipping lock to prevent the scanner from becoming damaged during transportation from the factory.
2.2 Connecting the Scanner to Your PC When running Windows 95 or Windows NT 4.0, connect the SCSI interface cable. When running Windows 98, Windows Me, Windows 2000, or Windows XP, connect either the USB interface cable or the SCSI interface cable. ATTENTION Connect only one of the USB or SCSI interface cables. Windows 95 and Windows NT 4.0 do not support USB interface.
HINT The factory default setting for SCSI ID is "ID 5". If the SCSI ID of another SCSI device is set to the same ID, either change the scanner's SCSI ID or SCSI ID of the other SCSI device. Set the device address using the SCSI ID switch on the back of the image scanner. 23 78 901 ATTENTION • Uninstall any older versions of FUJITSU TWAIN 32 driver if already installed. ATTENTION 456 Click For details on how to connect the scanner, refer to "2.2 Connecting the Scanner to Your PC" on page 4.
3. If the scanner is automatically detected, [Found New Hardware Wizard] or [Add/ Remove Hardware Wizard] dialog box will appear. Click [Cancel] to close the Wizard window. 6. Click [TWAIN Driver] on the window below. Windows XP screenshots are used in this section. The windows and operations may vary slightly depending on your OS. HINT 7. Error Recovery Guide Installation window appears.
10. When the [InstallShield Wiizard Complete] window appears, click [Finish]. ■ Installing ScandAll 21 "Scandall 21" is an image capturing software that complies with the TWAIN standard. The FUJITSU TWAIN 32 scanner driver enables you to capture images with a FUJITSU image scanner fi-series product ATTENTION When using Windows NT 4.0, Windows 2000 or Windows XP, log on as a user with "Administrator" privileges (privileges of the administrator of your PC). 1. Insert the Setup CD-ROM into the CD drive.
4. Select a language used for installation on [Choose Setup Language] window and click [OK]. Select [Select Source...] from the [Scan] menu of ScandAll 21. 4.Select "FUJITSU fi-4220C2dj" or "FUJITSU TWAIN32" on the dialog box. 5. Install the application following the instructions on the window. 6. When the [InstallShield Wizard Complete] window appears, click [Finish] HINT For Windows 98, Windows Me, Windows 2000, Windows XP: [FUJITSU fi-4220C2dj] For Windows 95, Windows NT 4.0: [FUJITSU TWAIN32] 5.
7. Documents are scanned, and the scanned images are displayed on the [ScandAll 21] window. 2. Turn your PC on and log on to Windows. ATTENTION When using Windows NT 4.0, Windows 2000 or Windows XP, log on as a user with "Administrator" privileges (privileges of the administrator of your PC). 3. If the scanner is automatically detected, [Found New Hardware Wizard] or [Add/ Remove Hardware Wizard] dialog box will appear. Click [Cancel] to close the Wizard window.
5. Click [INSTALL PRODUCTS]. 8. Select a language used for installation on [Choose Setup Language] window and click [OK]. 9. Follow the instructions on the window to install the application. 10. When the [InstallShield Wiizard Complete] window appears, click [Finish]. 6. Click [ISIS Driver] on the window below. 11. Your computer will be restarted and the scanner will be detected.
■ Installing QuickScan Pro™ 4. Continue to install the application following the instructions on the window. "QuickScan Pro™" is an image capturing software that complies with the ISIS standard. The FUJITSU ISIS scanner driver enables you to capture images with a FUJITSU image scanner fi-series product ATTENTION When using Windows NT 4.0, Windows 2000 or Windows XP, log on as a user with "Administrator" privileges (privileges of the administrator of your PC). 1. Insert the Setup CD-ROM into a CD drive.
2. Start QuickScan Pro™. From the [Start] menu select [Programs]-[QuickScan]-[QuickScan]. 3. Select [Select Scanner...] from [Scan] menu in QuickScan Pro™. HINT Refer to "QuickScan Overview" or "QuickScan Help" for information about QuickScan Pro™ functions and operations. On the [Start] menu, point to [Programs]-[QuickScan] and click the file. And select fi-4220C2 from the list of [Scanner:], and then click the [OK] button. Error Recovery Guide 4. Select [Preview Settings...] from the [Scan] menu.
4. Select a language to use for the installation in the window and click [OK]. 5. Install the application following the instructions in the window. Adobe Acrobat is required for displaying the manuals stored in the CDROM. * Installation of Adobe Acrobat 6.0 is not necessary if it has already been installed in your PC. HINT 1. Insert the Adobe Acrobat 6.0 CD-ROM into your CD-ROM drive. The CD-ROM is automatically recognized and the "Adobe Acrobat6.
4. After the setup screen displays, proceed with the instructions on the screen to perform the installation. HINT ATTENTION For more detailed information about Adobe Acrobat 6.0 installation, please read the "Read me" instructions on the screen of operation 2. For the Adobe Acrobat 6.0 operations, please refer to the "Adobe Acrobat 6.0 help". Support and User registration for Adobe products Refer to the technical support information stored in the [Customer Support] folder on Adobe Acrobat 6.
Appendix 1 TROUBLESHOOTING ■ Troubleshooting checklist Symptom Scanner does not turn on. Check this item Remedy Have you pressed the power button on? Push the power button in to turn the scanner. Are the AC cable and AC adapter properly connected to the scanner? Correctly connect the AC cable and the AC adapter. Are you using the correct AC cable and AC adapter supplied with the scanner from the manufacture? You must use the AC adapter and cable supplied with your scanner by the manufacture.
Symptom Paper frequently multi feeds Paper does not feed (pick error occurs frequently, or document stops midway).
■ Temporary error Indication ■ Device alarm (Non-Temporary error) Meaning Indication Meaning U0 Shipping lock error U1 Paper feed error E0 Flatbed motor malfunction. U2 Multi feed error E1 U4 The ADF cover is opened. Trouble in the optical system (Flatbed). E2 Trouble in the optical system (front). E3 Trouble in the optical system (back). E4 The motor’s fuse has blown out. E6 Trouble in the operator panel. E7 Trouble occurred in the EEPROM. E8 The SCSI interface fuse has blown out.
Appendix 2 DAILY CARE WARNING •The glass surface inside the ADF becomes hot during the operation. Before you clean inside the scanner, turn off its power and unplug the AC adapter from the outlet. Wait for at least 15 minutes. Do not turn off the scanner when you clean the Feed rollers.
Appendix 3 REPLACING CONSUMABLES WARNING The glass surface inside the ADF becomes hot during the operation. Before replacing the consumables, turn its power off and unplug the AC adapter from the outlet. Wait at least 15 minutes. The illustration below demonstrates the locations of the replacement parts. Refer to "Chapter 4 Replacing Consumables" fi-4220C2 Operator’s Guide on the Setup CD-ROM.
fi-4220C2 Image Scanner Getting Started P3PC-E937-02EN Date of issuance: October, 2009 Issuance responsibility: PFU LIMITED Copying of the contents of this manual in whole or in part and copying of the scanner application is forbidden under the copyright law. z The contents of this manual are subject to change without notice. z PFU LIMITED.
