All in One Printer User Manual

1-10
1.3 Operator Panel
Counter Functions
Batch counter (Left) button
is pressed for at
least one second.
The number of scanned documents from the start of
reading until "Paper empty" or an error is detected.
The counter is automatically reset at the start of
next reading. This counter can be used for checking
the number of scanned documents per batch.
(Right)button
is pressed for at
least one second.
This counter is increased by one per sheet. The
counter is not re-initialized until the power is turned
off. The counter can be used for checking the
number of scanned documents per day.
Abrasion counter The abrasion counter counts the accumulated number of scanned sheets.
This counter is increased by one per sheet scanned.
It is used for checking the cleaning cycle or the parts replacement cycle.
Refer to “Chapter7 OPERATOR PANEL MENUS of the Opelator’s
Guide” included in “User Manual CD-ROM” about how to reset this
counter.
Life counter Keeps a cumulative count of the total number of scans made by the
scanner. This counter is increased by one per sheet and may be used to
estimate of the device’s remaining life. This counter cannot be reset.
ATTENTION
The counter is not displayed when the value is 0.