Computer Products of America Image Scanner Operator's Guide fi-4990C
Table Of Contents
- Cover
- Inner Cover
- Revision Record
- Addresses
- IMPORTANT NOTE TO USERS
- Preface
- Conventions
- CONTENTS
- Chapter Index
- CHAPTER 1 COMPONENTS
- CHAPTER 2 INSTALLATION AND CONNECTIONS
- CHAPTER 3 OPERATING INSTRUCTION
- CHAPTER 4 DOCUMENT SPECIFICATION
- CHAPTER 5 SPECIFICATIONS
- CHAPTER 6 SETUP, BROWSE, AND TEST MODES
- Setup, Browse, and Test Modes
- Activating the Setup or Browse Mode
- Contents of the Setup or Browse Mode
- Transition of screens in setup mode
- Paper length check
- Doublefeed check
- Paper thickness setup
- Skew check
- IPC-3 mode
- Hopper height
- Paper separation level
- Drop-out color
- Background changeover
- Consumable counter
- Consumable counter reset
- Consumable alarm mode
- Buzzer
- Buzzer volume
- LCD contrast
- Picking speed
- TP_IF baud rate
- SCSI ID
- Product ID
- Pre-pick
- Pick start time
- Manual feed timeout
- Paper pick retry
- Paper feed retry
- Function key
- Setup mode lock
- Language
- White follower mode
- Interface board slot
- SCSI bus width setting
- Activating the Test Mode
- Contents of the Test Mode
- GLOSSARY OF TERMS
- INDEX
- Declaration of Conformity
- Back Cover
3-4
Clearing a consumable life alarm
This scanner has the consumable counter to estimate consumable life of the scanner. When the
consumable counter reaches the prescribed value, the LCD indicates an alarm that the consum-
able may be expired. For example, the following message appears:
Consumable life alarm
AAAAAAAA MMMM
In this case, press
CANCEL
. The LCD indicates the following message:
Reset Consumable Counter?
Yes:Enter No:Cancel
Yes (press
ENTER
): The scanner resets the consumable counter to zero.
No (press
CANCEL
): The scanner does not reset the consumable counter. In this case, the
consumable life alarm recurs when the next sheet is fed.
07C3.P65 01.2.17, 5:43 PM4