Computer Products of America Image Scanner Operator's Guide fi-4990C
Table Of Contents
- Cover
- Inner Cover
- Revision Record
- Addresses
- IMPORTANT NOTE TO USERS
- Preface
- Conventions
- CONTENTS
- Chapter Index
- CHAPTER 1 COMPONENTS
- CHAPTER 2 INSTALLATION AND CONNECTIONS
- CHAPTER 3 OPERATING INSTRUCTION
- CHAPTER 4 DOCUMENT SPECIFICATION
- CHAPTER 5 SPECIFICATIONS
- CHAPTER 6 SETUP, BROWSE, AND TEST MODES
- Setup, Browse, and Test Modes
- Activating the Setup or Browse Mode
- Contents of the Setup or Browse Mode
- Transition of screens in setup mode
- Paper length check
- Doublefeed check
- Paper thickness setup
- Skew check
- IPC-3 mode
- Hopper height
- Paper separation level
- Drop-out color
- Background changeover
- Consumable counter
- Consumable counter reset
- Consumable alarm mode
- Buzzer
- Buzzer volume
- LCD contrast
- Picking speed
- TP_IF baud rate
- SCSI ID
- Product ID
- Pre-pick
- Pick start time
- Manual feed timeout
- Paper pick retry
- Paper feed retry
- Function key
- Setup mode lock
- Language
- White follower mode
- Interface board slot
- SCSI bus width setting
- Activating the Test Mode
- Contents of the Test Mode
- GLOSSARY OF TERMS
- INDEX
- Declaration of Conformity
- Back Cover
5-1
The following table lists the installation specifications of the scanner.
Installation Specifications
Item Specification
590 (23.2 in)
690 (27.2 in)
540 (21.3 in) without optional endorser
610 (24.0 in) with optional endorser
Temperature 15 to 35°C -20 to 60°C
(60 to 95°F) (-4 to 140°F)
Phases
Single-phase
Frequency
Voltage
100 to 240 VAC ±10 %
Input power
Power consumption 250 VA or less
Device status Operating Not operating
Humidity 20 to 80 % 8 to 95 %
Ambient
condition
65 (143 lb.)
Weight (kg)
Dimensions (mm)
50/60 Hz + 2% -4%
Width
Depth
Height
11C5.P65 01.2.17, 5:45 PM1