Computer Products of America Image Scanner Operator's Guide fi-4990C
Table Of Contents
- Cover
- Inner Cover
- Revision Record
- Addresses
- IMPORTANT NOTE TO USERS
- Preface
- Conventions
- CONTENTS
- Chapter Index
- CHAPTER 1 COMPONENTS
- CHAPTER 2 INSTALLATION AND CONNECTIONS
- CHAPTER 3 OPERATING INSTRUCTION
- CHAPTER 4 DOCUMENT SPECIFICATION
- CHAPTER 5 SPECIFICATIONS
- CHAPTER 6 SETUP, BROWSE, AND TEST MODES
- Setup, Browse, and Test Modes
- Activating the Setup or Browse Mode
- Contents of the Setup or Browse Mode
- Transition of screens in setup mode
- Paper length check
- Doublefeed check
- Paper thickness setup
- Skew check
- IPC-3 mode
- Hopper height
- Paper separation level
- Drop-out color
- Background changeover
- Consumable counter
- Consumable counter reset
- Consumable alarm mode
- Buzzer
- Buzzer volume
- LCD contrast
- Picking speed
- TP_IF baud rate
- SCSI ID
- Product ID
- Pre-pick
- Pick start time
- Manual feed timeout
- Paper pick retry
- Paper feed retry
- Function key
- Setup mode lock
- Language
- White follower mode
- Interface board slot
- SCSI bus width setting
- Activating the Test Mode
- Contents of the Test Mode
- GLOSSARY OF TERMS
- INDEX
- Declaration of Conformity
- Back Cover
6-17
If an error occurs during positioning, press
CANCEL
. The LCD returns to the option select
screen. Repeat step 4.
5. Press
CANCEL
three times.
The LCD returns to the Ready screen.
After this setting, the hopper is set at the new
height whenever power is turned on.
Ready
Paper separation level
This function sets the power of the brake roller for stabilizing paper separation in picking documents.
Remarks
Thick: strong braking power for thick paper
| (changes according to paper thickness)
Thin: weak braking power for thin paper
LCD display
Paper Separation Level
Options
Thick, Medium Thick, Normal, Medium Thin,
Thin (Default: Normal)
If the following errors frequently occur, set the braking power as explained below.
• Double feed
• Mis-pick
• SF2 did not detect leading edge of paper
13C6.P65 01.2.17, 5:46 PM17