Computer Products of America Image Scanner Operator's Guide fi-4990C
Table Of Contents
- Cover
- Inner Cover
- Revision Record
- Addresses
- IMPORTANT NOTE TO USERS
- Preface
- Conventions
- CONTENTS
- Chapter Index
- CHAPTER 1 COMPONENTS
- CHAPTER 2 INSTALLATION AND CONNECTIONS
- CHAPTER 3 OPERATING INSTRUCTION
- CHAPTER 4 DOCUMENT SPECIFICATION
- CHAPTER 5 SPECIFICATIONS
- CHAPTER 6 SETUP, BROWSE, AND TEST MODES
- Setup, Browse, and Test Modes
- Activating the Setup or Browse Mode
- Contents of the Setup or Browse Mode
- Transition of screens in setup mode
- Paper length check
- Doublefeed check
- Paper thickness setup
- Skew check
- IPC-3 mode
- Hopper height
- Paper separation level
- Drop-out color
- Background changeover
- Consumable counter
- Consumable counter reset
- Consumable alarm mode
- Buzzer
- Buzzer volume
- LCD contrast
- Picking speed
- TP_IF baud rate
- SCSI ID
- Product ID
- Pre-pick
- Pick start time
- Manual feed timeout
- Paper pick retry
- Paper feed retry
- Function key
- Setup mode lock
- Language
- White follower mode
- Interface board slot
- SCSI bus width setting
- Activating the Test Mode
- Contents of the Test Mode
- GLOSSARY OF TERMS
- INDEX
- Declaration of Conformity
- Back Cover
6-25
Finished resetting!!
<<SETUP MODE>>
Consumable Counter Reset
5. When the desired option appears, press
ENTER
to resetting the Consumable
Counter.
The LCD returns to the <<SETUP MODE>>
menu screen (Consumable Counter Reset).
6. To quit the <<SETUP MODE>>, turn off the
power.
Consumable alarm mode
This function is to be used how to notify the alarm generation when the accumulated consumable
counter value reaches to the setting value.
NOTE
You cannot use this function when the setup mode is brought by pressing “MENU” in the Ready
status.
Remarks
Alarm & Stop scanning:
when the accumulated value reaches
to the Consumable Counter Setting
value, the alarm displayes on the LCD
and stop the scanning operation.
Message only:
When the accumulated value reaches
to the Consumable Counter Setting
value, the alarm displays on the LCD.
(scanning operation does not stop.)
LCD display
Consumable Alarm
Mode
Options
Alarm & Stop scanning (Default)
Message only
14C6.P65 01.2.17, 5:46 PM25