P3PC-1592-01ENZ0 fi-5015C Image Scanner Operator's Guide
CONTENTS ■ Regulatory Information ........................................................ iii ■ Note, Liability ......................................................................... v ■ Safety Precautions ............................................................. viii Chapter 1 NAME OF PARTS.................................................... 1 1.1 Units..................................................................................... 2 1.2 Operator Panel ......................................
Chapter 4 TROUBLESHOOTING ........................................... 51 4.1 Error Indications in the Function Number Display........ 52 4.2 Troubleshooting ............................................................... 54 APPENDIX A SCANNER SPECIFICATIONS..................................... AP-1 APPENDIX B Using [Scan] or [Send to] button .............................. AP-3 APPENDIX C GLOSSARY OF TERMS.............................................. AP-5 INDEX ......................................
INTRODUCTION Thank you for purchasing the fi-5015C Color Scanner. This document describes how to handle fi-5015C and basic operation methods. Before you start using fi5015C be sure to thoroughly read this manual to ensure correct use. ■Regulatory Information FCC declaration This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Bescheimigung des Herstellers / Importeurs Für den fi-5015C wid folgendes bescheinigt: • In Übereinsstimmung mit den Bestimmungen der EN45014(CE) funkentstört • Maschinenlärminformationsverordnung 3.GPSGV: Der höchste Schalldruckpegel beträgt 70 dB (A) oder weniger, gemäß EN ISO 7779. International ENERGY STAR® Program As an ENERGY STAR® Partner, PFU LIMITED has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
■Note, Liability READ ALL OF THIS MANUAL CAREFULLY BEFORE USING THIS PRODUCT. IF THIS PRODUCT IS NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE CAUSED TO USERS OR BYSTANDERS. Also, keep this manual in a safe place so that it can be easily referred to during use of this product.
How Trademarks Are Indicated In This Manual References to operating systems (OS) are indicated as follows: Windows 98 Microsoft® Windows® 98 operating system. Windows Me Microsoft® Windows® Millennium Edition operating system. Windows 2000 Microsoft® Windows® 2000 Professional operating system. Windows XP Microsoft® Windows® XP Professional operating system, Microsoft® Windows® XP Home Edition operating system.
Warning Indications Used In This Manual WARNING This indication alerts operators to an operation that, if not strictly observed, may result in severe injury or death. CAUTION This indication alerts operators to an operation that, if not strictly observed, may result in safety hazards to personnel or damage to equipment. Symbols Used In This Manual ATTENTION HINT This symbol alerts operators to particularly important information. Be sure to read this information.
■Safety Precautions WARNING Do not damage the AC cable. A damaged AC cable may cause fire or electric shock. Do not place heavy objects on AC cables, or pull, bend, twist, heat, damage or modify AC cables. Do not use damaged AC cables or power plugs, or install any cables or power plugs to loose wall sockets. Use only specified AC cables and connector cables Use only specified AC cables and connector cables. Failure to use the correct cables might cause electric shock and/or equipment failure.
Turn the scanner OFF if it is damaged. If the scanner is damaged for any reason, disconnect immediately the power plug in order to turn out the scanner. Contact the store where you purchased the scanner. Do not put liquids inside the scanner. Do not insert or drop metal objects in to the scanner. Do not scan wet documents or documents with paper clips or staples. Do not splash or allow the scanner to get wet. If foreign objects (water, small metal objects, liquids, etc.
CAUTION Do not install the scanner on unstable surfaces. Make sure that the scanner is installed on a flat, level surface and that none of its parts extend beyond the surface top, such as a desk or table. Do not install the scanner on unstable surfaces. Install the scanner on a level surface that is free of vibration to prevent it from falling. Install the scanner on a strong surface that will support the weight of the scanner and other devices. Do not block the ventilation ports.
Before moving the scanner, disconnect the power plug from the power outlet. Do not move the scanner with the power and interface cables connected as this might damage the cables, causing fire, electric shock or injuries. Before moving the scanner, be sure to disconnect the power plug from the power outlet, and all other data cables. Make sure that the floor is free of any obstruction. Protect the scanner from static electricity.
xii
Chapter 1 1 NAME OF PARTS This chapter shows the exterior view and the name of each part to descrive its function. 1.1 Units ......................................................................................................................... 2 1.2 Operator Panel ........................................................................................................
1.1 Units 1. Front side 1 2 3 4 5 6 7 8 Part 2 Function 1. Automatic document feeder (ADF) Automatically feeds documents one by one to the reading position in the scanner. 2. Side guides Holds the documents straight. 3. ADF paper chute Holds the documents to be fed by the automatic document feeder (ADF). 4. Extension Extended when long documents are set. 5. Document cover Stacks the documents after being scanned by ADF. Holds the document to be scanned on Flatbed. 6.
1.1 Units 2. Flatbed 1 1 NAME OF PARTS 2 Part Function 1. Document holding pad Holds the document on Flatbed. 2. Document bed On which the document is set face down. 3. Backside 1 2 Part 3 4 Function 1. USB connector Connects USB cable to PC. 2. ADF cable connector Connects the cable from ADF. 3. DC inlet Connects the cable from AC adaptor 4.
4. Side (ADF side) 1 Part 1. Shipping lock Function Locks the scanning head to prevent the scanner damaged when moving or transporting.
1.2 Operator Panel 1.2 Operator Panel 1 (WPEVKQP 2 3 Part 5ECP 4 5 NAME OF PARTS 1 5GPF VQ 2QYGT 6 Function 1. Function button Changes the function activated by [Send to] button. 2. Function number display Indicates the function number or error status. For detail refer "4.1Error Indications in the Function Number Display" on page 52 3. [Send to] button Launches an application software which is linked by the value of Function number display. 4.
6
Chapter 2 BASIC SCANNER OPERATIONS 2 This chapter describes how to turn On/Off the scanner, and how to load/scan the documents. In this chapter Windows XP screenshots are illustrated. The screens and operations may differ slightly if the OS you are using is not Windows XP. Also, when FUJITSU TWAIN32 is updated the screens and operations noted in this chapter will differ slightly. 2.1 Turning ON/OFF the Scanner ................................................................................ 8 2.
2.1 Turning ON/OFF the Scanner 1. Turning the Power On Switch on the Main Power switch located on the side. Then press [Power] button on the operator Panel. The scanner is turned ON, and the green LED on the operator panel lights. During the initialization, the indication of the Function Number Display changes as follows: “8”->"P" -> "0" -> "1" The indication "1" means that the operator panel scanner is in the ready status. 2. Turning the Power Off Hold the power buton down for at least two seconds.
2.1 Turning ON/OFF the Scanner 2) Double click the "Printer and Other Hardware" icon on the Control panel of your PC. 2 ⇒The [Printer and Other Hardware] window appears. ⇒The [Scanners and Cameras] window is displayed. 4) Right click the "fi-5015C", and select [Properties] from the menu (for Windows Me, Windows XP), or double click (for Windows 98, Windows 2000).
⇒The [fi-5015C Properties] dialog box appears. 5) Click the "Device Set" tab. ⇒The following panel appears. 2. Click [Power Control] button ⇒The following screen is displayed.
2.1 Turning ON/OFF the Scanner 3. In this screen, • To power on/off the scanner by pressing the Power button: ⇒select "Enable power switch". • To power on/off the scanner by connecting or disconnecting the AC cable: ⇒select "Disable power switch". ■ Power Save Mode • Load the document on the ADF paper chute. • Press any button on the operator panel. (The scanner will be turned OFF when pressing down the power button for at least two seconds.) • Execute a command from the scanner driver.
2.2 Loading Documents on ADF This section explains how to check the document condition and load them on ADF. These operations are very important to avoid paper jam or scanning error. 2.2.1 Checking document condition Check that the document meets the following condition. • If the documents do not meet the conditions, scan them on Flatbed HINT referring to "Loading Document on Flatbed" on page.
2.2 Loading Documents on ADF • • Documents that are not square or rectangular Very thin documents Do not use the following documents: • Paper-clipped or stapled documents • Documents on which the ink is still wet • Documents other than paper such as fabric, metal foil, or transparencies • When scanning semi-transparent documents, slide the [Brightness] bar ATTENTION • Carbonless paper contains chemical substances that may damage the to light to avoid bleed through.
2.2.2 Loading documents on ADF This section explains how to load documents on ADF. 1. Align the edges of the documents. 1) Grasp no more than 50 sheets in a stack. 2) Confirm that all the documents have the same width. ATTENTION • The documents on ADF paper chute should be less than 50 sheets. Setting more than 50 sheets may cause paper jam or reading problem. • When scanning with the ADF, make sure that no documents are placed on the flatbed.
2.2 Loading Documents on ADF 4. Load the documents on the ADF paper chute. 2 Set the documents face-up in the ADF paper chute with the upper edge of the documents downwards. 5. Adjust the side guides to the width of the documents. Move the side guides so that they touch both sides of the documents. If there is any clearance between the side guides and the edges of documents, the scanned image may be skewed. 6. Scan the documents. For how to scan the document, refer to "2.4 Scanning Documents" on page.18.
2.3 Loading Document on Flatbed CAUTION Do not look directly at the light source during the scanning operation. 1. Open the document cover. 2. Place the document on the document bed (glass) with face down. 3. Position the document so that the upper-left corner of the document is aligned with the reference mark of the document bed. 4. Close the document cover gently. 5. Scan the document. For how to scan the document, refer to "2.4 Scanning Documents" on page.18.
2.3 Loading Document on Flatbed ■ Document Size For Flatbed: Minimum 26 (Width ) x 26 (Length) mm (1 x 1 in.) Maximum 216 (Width ) x 297 (Length) mm (8.5 x 11.7 in.) Orientation of the document and how to set Paper size shall be as follows for Portrait scanning or Landscape scanning [Portrait] [Landscape] BASIC SCANNER OPERATIONS • Paper Size setting • Paper Size setting Select Paper Size among A4, A5, B5, Letter and Exective, in the following driver screen.
2.4 Scanning Documents This section explains how to scan documents using Scandall21 as an example. 1. Load documents on the scanner. For details about loading documents, refer to "2.2 Loading Documents on ADF" on page 12 or "2.3 Loading Document on Flatbed" on page 16. 2. Start up ScandAll 21. Select [Start] - [Program] - [Scanner Utility for Microsoft Windows] - [ScandAll 21]. ⇒This starts up ScandAll 21. 3. Select the scanner to use. Select [Select Source] from the [Scan] menu.
2.4 Scanning Documents 5. Set the scan type, paper size (see below), etc., and click the [Scan] button. For details on settings in the [TWAIN Driver] dialog box, refer to "2.5 How to use the Scanner Driver" on page 20 Select ADF or Flatbed 2 BASIC SCANNER OPERATIONS Select Paper Size ⇒The images of scanned documents are displayed on the [ScandAll 21] window. For details on functions and operations of ScandAll 21, refer to the description in the [Help] menu.
2.5 How to use the Scanner Driver ■ FUJITSU TWAIN32 Scanner Driver FUJITSU TWAIN32 Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by using application software that complies with the TWAIN standard. The following describes the procedure with examples of ScandAll 21 for ordinary scanning by using this driver. 1. Procedure for Basic Scanning Operation 1) Startup the application.
2.5 How to use the Scanner Driver HINT 6) Configure settings for scanning and click the [Scan] button. For details about the settings on this window, refer to "Setting Window for FUJITSU TWAIN32 Scanner Driver" on page 23. fi-5015C Image Scanner Operator’s Guide 21 2 BASIC SCANNER OPERATIONS ScandAll 21 provides the following scanning methods: • [To View...] :Displays scanned images on the display screen. • [To File...:] :Saves scanned images as files (*.BMP, *.TIF, *.JPG). • [To FTP...
⇒The images of scanned documents are displayed on the [ScandAll 21] window. Depending on the settings of the application software, images may not be displayed. For details, refer to the documentation or Help file of your application. e.x.) When you select [To File...] from the [Scan] menu of ScandAll 21, images of scanned documents are not displayed on the window. 7) Save the scanned images. Select [Save As...] from the [File] menu to save the scanned images.
2.5 How to use the Scanner Driver 2. Setting Window for FUJITSU TWAIN32 Scanner Driver 2 Resolution Specifies the resolution of scanning. It can be specified by selecting from the list a default value or "custom" (specifies any resolution in 1 dpi unit). By marking the [Predefine] checkbox, you can select one from three predefined settings as [Best], [Better] and [Normal] to scan documents instead of setting details by yourself.
Image Mode Specifies the image type for the scanned documents. Black & White Halftone Grayscale Color Documents are scanned in binary (black and white). Documents are scanned through halftone processing in black and white. Documents are scanned in gradations from black to white. For this mode you can select 256 gradations or 4 bit (16 gradations). Documents are scanned color mod. For this mode, you can select 24 bit Color, 256 Color or 8 Color.
2.5 How to use the Scanner Driver [Option...] button You can set up the details of optional functions on the window below. 2 [Job/Cache] tab Select this tab when setting cache mode, blank page skipping, etc. [Generic] tab Select this tab to change the unit displayed on the Setting Window for the FUJITSU TWAIN32 Scanner Driver. (Millimeters, Inches, and Pixels are available) [Startup] tab Select this tab for setting the Scanner Operation Panel.
■ FUJITSU ISIS Scanner Driver FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by using application software that complies with the ISIS standard. The following describes the procedure with examples of QuickScan for ordinary scanning by using this driver. The procedure may vary depending on your application. If you use an application other than QuickScan, please refer to its Guide or Help for further information. 1.
2.5 How to use the Scanner Driver 5) Select the profile for scanning. 2 • • When creating a new profile Select one from already existing profiles and click [Add Profile...] button. ⇒ A new profile will be created based on the profile you select. When changing the settings of already existing profiles Select one from already existing profiles and click [Edit Profile...] button. ⇒ The settings of the selected profile can be changed.
7) Configure settings for scanning and click the [OK] button. For details on this dialog box, refer to "Configuration Window of FUJITSU ISIS Scanner Driver" on page 29. 8) The [Profile Editor] window appears. Click the [OK] button to return to [New batch] dialog. 9) Load the documents on the scanner. 10) Click the [Scan] button. ⇒Scanned images are displayed on the window. Refer to the "QuickScan Overview" or the "QuickScan Help" for further information on functions and operations of QuickScan.
2.5 How to use the Scanner Driver 2. Configuration Window of FUJITSU ISIS Scanner Driver "Main" tab 2 BASIC SCANNER OPERATIONS Mode Selects a color mode suitable for the purpose from the menu. Black & White Documents are scanned in binary (black and white). 256-level Grayscale Scans data by 254 shades of gray plus black and white. This mode uses 8 bits per pixel. This mode is switable for scanning monochrome photographs. 24-bit Color Scans data as full-colored image using 24 bits per pixel.
Brightness Sets the brightness of the entire image. Specify the brightness as a number within the range of 1 (dark) to 128 (bright). To brighten the entire image, increase the value of the setting. To darken the entire image, decrease the value. Contrast Sets the contrast between light and shadow of the scanned image. Specify the contrast as a number within the range of 1 (low [soft]) to 100 (high [sharp]). Increasing this value makes the contrast sharper. Paper Source Selects the scanning method.
2.5 How to use the Scanner Driver [Scan Area...] button Opens the Scan Area dialog box. Specify scan area for the document size. The size can be set by dragging the frame with mouse. Otherwise, enter any value for the setting.
"More" tab Opens [More Settings] window. Used for setting advanced features. Use Advanced DTC This option scans any kind of documents by binary processing to produce data with good scanning quality. Documents containing thin letters, characters with the colored background, and colored charts cannot be scanned sufficiently clearly by ordinary binary processing. By using this option, however, you can achieve good scanning quality.
2.5 How to use the Scanner Driver "Gamma" tab 2 Custom You can specify the numeric values of items such as “Gamma”, “Brightness”, “Contrast”. "About" tab Displays the version number of ISIS driver. fi-5015C Image Scanner Operator’s Guide 33 BASIC SCANNER OPERATIONS Download You can download and use any Gamma pattern.
34
Chapter 3 MAINTENANCE This chapter describes how to clear the paper jam, perform daily maintenance and cleaning. 3 CAUTION Be careful, the inside of ADF (automatic document feeder) may become hot during the operation. 3.1 How to clear the paper jam .................................................................................. 36 3.2 Cleaning................................................................................................................. 37 3.3 Replacing Consumable ....................
3.1 How to clear the paper jam CAUTION Be careful not to get injured when removing jammed documents. When a paper jam occurs while using ADF, follow the procedure below to remove jammed paper. 1) Remove the documents from the ADF paper chute. 2) Open the ADF. . CAUTION Be careful, the ADF may close and pinch your fingers. 3) Remove the jammed paper. ATTENTION Staples, paper clips, etc. cause document jams.
3.2 Cleaning 3.2 Cleaning To keep scanner performance stable, clean the scanner and replace the consumable if necessary as follows. CAUTION Be careful, the inside of ADF (automatic document feeder) may become hot during the operation. 3.2.1 Cleaning Materials Cleaning Materials Parts Number 3 Remarks CA99501-0013 1 bottle Moisten a cloth with this fluid and wipe the scanner clean.
3.2.2 Cleaning the Flatbed ATTENTION • Detergent for cleaning windows or glass cleaner can be used instead of cleaning fluid. However, do not use paint thinner or other organic solvents. • Do not allow moisture to get inside the device during cleaning. ■ Cleaning Method 1. Open the document cover. 2. Clean the following locations using a soft, dry cloth moistened with cleaning fluid. 1 2 • Document holding pad - 1 Wipe gently. • Document bed - 2 Wipe lightly.
3.2 Cleaning 3.2.3 Cleaning the ADF Clean the ADF every 1,000 scans. Note that this guideline varies according to the type of documents you are scanning. For example, it may be necessary to clean the ADF more frequently if documents are scanned when the toner is not sufficiently fixed on the printout. As the documents are scanned by ADF, Pad ASSY and Pick roller unit may be contaminated with ink, toner particles or paper dust.
• Pad ASSY Wipe Pad ASSY with the cloth in the direction from bottom to top. Pick Springs Mylar sheet ATTENTION Sensor lever Be careful not to hook the pick springs, sensor lever and mylar sheet near the Pad ASSY. • Pick roller unit Wipe the Pick roller unit by moving the cloth from side to side of rollers. Rotate the rollers forward with your finger and repeat the wiping procedure until all surface of roller are cleaned. • Pinch rollers Clean Pinch roller softly not to damage its surface.
3.2 Cleaning 4. Open the Flatbed cover and clean the following locations. 3 MAINTENANCE ATTENTION The glass surface under the ADF becomes hot during the operation of the scanner.
3.3 Replacing Consumable CAUTION Note the inside of ADF (automatic document feeder) may become hot during the operation. 3.3.1 Part number and Replacement cycle The following table lists the consumable used in the scanner. Be sure to keep some consumables in stock. The customer is required to replace consumable periodically. Otherwise, the scanner may not function properly. Part number and recommended replacement cycle is, No.
3.3 Replacing Consumable 3.3.2 Guidelines for Consumable Replacement Cycle With this product, you can learn how many times the consumables are used so that you can estimate the right timing for the replacement. 1. When turning on the power, check that the scanner is connected to your PC. Refer to "2.3 Connecting the Scanner to your PC" in fi-5015C Getting Started on the CDROM for information about connecting the scanner to your personal computer. 2.
⇒The [fi-5015C Properties] dialog box appears. 5. Click the "Device Set" tab. ⇒The following panel appears. You can confirm the following information on this panel: • Total number of scans with ADF and Flatbed.
3.3 Replacing Consumable The following message may appear while using the scanner: 3.3.3 Replacing the Pad ASSY 1. Remove all documents from the ADF paper chute. 2. Open the ADF. CAUTION Be careful, the ADF may close and pinch your fingers. fi-5015C Image Scanner Operator’s Guide 45 3 MAINTENANCE Replace consumables when this message is displayed. After clicking the [Ignore] button, this message will disappear and scanning will continue. Please replace the consumable as soon as possible.
3. Remove the snap-in Pad ASSY by pinching the upper part of the pad clamp as shown in the following photo. 4. Install new Pad ASSY by the reverse procedure of removing. ATTENTION Make sure that the Pad ASSY is firmly attached. When the Pad ASSY is not correctly attached, document jams or other feeding errors may occur. 5. Press the center of the ADF to close it until it clicks. 6. Reset the pad counter. 1) Check that the scanner is connected to your PC and turn on the scanner.
3.3 Replacing Consumable 4) Click the "Device Set" tab. 3 Click the [OK] button. The Pad counter returns to "0". fi-5015C Image Scanner Operator’s Guide 47 MAINTENANCE 5) After clicking the [Clear] button beside "Pad" in "Page Counter", click the [OK] button. ⇒The following window appears.
3.3.4 Replacing the Pick roller unit 1. Remove all documents from the ADF paper chute. 2. Open the ADF. CAUTION Be careful, the ADF may close and pinch your fingers. 3. Remove the Pick roller unit from the scanner. 1) Pinch the fixture with your fingers with another hand holding the Pick roller unit.
3.3 Replacing Consumable 2) Pull the Pick roller unit to the fixture‘s side. ⇒The Pick roller unit is removed downwards. 3 MAINTENANCE 4. Attach a new Pick roller unit to the scanner. Attatch a new Pick roller unit to the scanner in reverse order of removing. 1) Set the Pick roller unit inserting an end of shaft into the shaft hole correctly as shown in the following photos. ATTENTION Make sure that the end of the Pick roller unit shaft is correctly inserted in the shaft hole.
5. Press the center of the ADF to close it until it clicks. 6. Reset the Pick roller counter. 1) Check that the scanner is connected to your PC and turn on the scanner. 2) Open the [Scanners and Cameras] from the control panel of your PC. 3) Open the [Properties] of [fi-5015C] from the [Scanners and Cameras]. ⇒The [Properties of fi-5015C] dialog box appears. 4) Click the "Device Set" tab. 5) After clicking the [Clear] button besides "Pick roller" in "Page Counter", click the [OK] button.
Chapter 4 TROUBLESHOOTING This chapter describes how to remedy troubles and items to check before contacting the agent where you bought the scanner. 4 4.1 Error Indications in the Function Number Display ............................................ 52 4.2 Troubleshooting....................................................................................................
4.1 Error Indications in the Function Number Display When any error occurs, the operator panel indicates "U" followed by a number alternately for temporary errors, or "E" followed by a number for device alarms (permanent error). Temporary errors can be resolved by the operator, but the device alarm requires recovery works by support engineers.
4.1 Error Indications in the Function Number Display ■ Device alarms: A number appearing in alternation following the "E" refers to the following type of device alarms: Indication Meaning E0 Flatbed motor malfunction E2 Trouble in the optical system E7 Trouble occurred in the internal memory (EEPROM). Eb A LSI error Ec An error in the memory Ed An error with USB chip Solution When you encounter any alarm, turn off and on the scanner.
4.2 Troubleshooting CAUTION Be careful, the inside of ADF (automatic document feeder) may become hot during the operation. If a problem occurs, check the following items before contacting the manufacturer's authorized service center. Symptom Scanner does not turn on. Check this item Remedy Is the main switch turned on? Turn the main switch on. Have you pushed the power button? Push the power button.
4.2 Troubleshooting Check this item Multi feed* frequently occurs. Does the document satisfy the "Document Quality" described in Section 2.2.1? Scan the documents by Flatbed. Are the documents set properly in the ADF paper chute? Fan the documents before scanning. Correctly align the document stack and load them on the ADF paper chute. Refer to Section 2.2.2 for details. Is the document stack thicker than 4mm? Reduce the number of sheets in the document stack to 4 mm thickness or less.
56
APPENDIX A SCANNER SPECIFICATIONS ■ Basic Specifications Item Dimension (mm) Weight(kg)/lb Input power Specifications Width Depth Height 328 (12.9 in.) 447 (17.6 in.) 175 (6.9 in.) 5.5 (11.
■ Dimensions 175 (6.88 in.) 447 (17.6 in.) 175 (6.88 in.) 328 (12.9 in.
APPENDIX B Using [Scan] or [Send to] button ■ Settings on the Personal Computer By setting the link of the application software to the [Scan] or [Send to] button, you can launch the linked application by simply pushing the button. 1. Select [Start]-[Control Panel]. 2. Select [Scanners and Cameras]-[Properties]. 3. Select the [Events] tab. 4. Select an Event. For the case of Windows XP, select an event for starting up any application from the [Select an event] menu.
5. Select the application with its process, excuted by the event. For the case of Windows XP, click [Start this program] under [Actions] and select the application and process from the menu. 6. Click the [OK] button. The window and operations may vary depending on your OS. HINT ■ Settings on the Scanner Function number display (WPEVKQP Function button 5GPF VQ 5ECP Send to button 2QYGT Scan button • To use the [SCAN] button: You can use this button as is; no special settings are required.
• To use the [Send to] button: Press the [Function] button to change the number on the function number display. Choose the same number as an event number you selected (Send to 1 - 9) on the computer. HINT • For example, when you want to execute an event "Send to 2", choose on the function number display. • Every time you press the [Function] button, the number displayed will change in the order presented below. "1, 2, 3...9, C, 1, 2, 3,...
AP-6
APPENDIX C GLOSSARY OF TERMS A4 size A standard paper size. Paper size is 210 x 297 mm. A5 size A standard paper size. Paper size is 148 x 210 mm. A6 size A standard paper size. Paper size is 105 x 148 mm. A7 size A standard paper size. Paper size is 74 x 105 mm. A8 size C A standard paper size. Paper size is 53 x 74 mm. ADF (Automatic Document Feeder) A unit that allows the user to scan a number of pages consecutively.
Automatic size/skew detection A function that automatically detects the documents' page size and adjusts output data to the detected page size. Document skewing is automatically detected and corrected for the output image. Brake roller A roller that prevents two or more sheets of paper from being fed simultaneously into the ADF. Brightness Refers to the brightness of scanned images in this manual.
Default settings Pre-set values for optional menus. Density In this manual, refers to a measurement of the depth of the display. Dither The process by which a group of dots is arranged to represent a shade of gray. The predetermined dot pattern simulates shades of gray. This scanning process offers the advantage of reduce memory requirements compared to multilevel gray.
Equipment Error An error that cannot be fixed by the operator. The operator should call the manufacturer for service. Error diffusion High-quality halftone (pseudo-grayscale) image production based on black-and-white pixel binarization. A pixel's optical density and that of adjacent pixels are summed, with black pixels relocated in their order of density as they relate to adjacent pixels. The purpose of this technique is to minimize the average error between read and printed densities.
Flatbed An input device of the scanner, where documents are placed and scanned. Generally used for scanning pages out of a book, or paper that is out of the feeding specification of the ADF. Also used to scan a small volume of documents by manual operation. Gamma A unit of changes of images' brightness. It is expressed as a function of the electric input power to devices (scanner, display, etc.) and an image's brightness.
IPC preset mode While reading binary images, it is necessary to set the scanner according to the quality of the sheet to be read. In this mode, these settings can be performed in advance by corresponding each setting to a pattern number. ISIS (Image Scanner Interface Specification) A standard of API (Application Program Interface) or protocol for imaging devices (scanners, digital cameras, etc.) developed by Pixel Translations, a division of Captiva Software.
Mirror image The read image is symmetrically flipped to produce a mirror image of the original detected in the main scanning direction. Moire Patterns Recurrent patterns on scanned images caused by incorrect settings of angles. Noise removal Isolated noise from an image appearing as black spots in white areas and voids in black areas is removed to improve image quality. Removes particles from the document image. Common particles include toner and fax particles.
Photograph mode (White level follower OFF) Selecting photograph mode makes brightness and contrast settings effective but prevents the threshold from being set. With photograph mode, the darkness of image corresponds to the black-pixel density, making it suitable in scanning images such as photographs having gradations. Pick roller Roller(s) that picks the page from the batch of paper in the paper chute and feed it into the ADF.
Separation roller A roller that separates the sheets of paper from each other. Simplex reading mode A mode for scanning only the front side of the document. Smoothing A process that eliminates "jaggies" from slanted lines and curves. Irregular convexities are deleted and irregular concavities filled in. This is useful in OCR applications, for example. Storage temperature/humidity The temperature and humidity levels necessary for proper storage of the scanner.
TWAIN (Technology Without Any Interesting Name) A standard for API (Application Program Interface) or protocol for imaging devices (scanners, digital cameras, etc.) developed by TWAIN Working Group. In order to use devices that comply with this standard, it is necessary to install driver software based on the same standard. Ultrasonic sensor A type of sensor for detecting multi feeding by ultrasonic sound.
INDEX A Paper Size (TWAIN) .................... 17, 19, 23 ADF (automatic document feeder) ............ 2 Power save mode .................................... 11 C R Checking document condition ................. 12 Remedying Common Troubles ................ 54 .................................. 37 Replacing the Pad ASSY ........................ 45 ........................................ 37 Replacing the Pick Roller ........................
fi-5015C Image Scanner Operator's Guide P3PC-1592-01ENZ0 Date of issuance: February, 2006 Issuance responsibility: PFU LIMITED The contents of this manual are subject to change without notice. z PFU LIMITED is not liable whatsoever for any damages resulting from the use of this scanner and procedures described in this manual, profit loss due to defects, and any claims by a third party.
