fi-60F Image Scanner P3PC-1102-07EN Getting Started fi-60F Image Scanner Getting Started
CONTENTS ■ Regulatory Information ........................................................ ii ■ Note, Liability ....................................................................... iv ■ Safety Precautions ................................................................ v Chapter 1 PREPARING THE SCANNER.................................. 1 1.1 Checking the Contents of the Scanner Package............. 1 1.2 Names and Functions of Parts..........................................
INTRODUCTION Thank you for purchasing the fi-60F Scanner product. This document describes how to handle fi-60F Scanner and basic operation methods. Before you start using fi60F Scanner be sure to thoroughly read this manual to ensure correct use. ATTENTION The "Operator’s Guide" is stored on the Setup Disk. The guide provides useful and detailed information on operations when you would like to use advanced features, daily maintenance of the scanner, replacement of consumables.
Use in High-safety Applications How Trademarks Are Indicated In This Manual This product has been designed and manufactured on the assumption that it will be used in office, personal, domestic, regular industrial, and general-purpose applications.
Manufacturer Symbols Used In This Manual PFU LIMITED International Sales Dept., Imaging Business Division, Products Group Solid Square East Tower, 580 Horikawa-cho, Saiwai-ku, Kawasaki-shi Kanagawa 212-8563, Japan Phone : (81-44) 540-4538 ATTENTION This symbol alerts operators to particularly important information. Be sure to read this information. This symbol alerts operators to helpful advice regarding operation.
■ Safety Precautions Wipe any dust from the power plug. In the following warnings, "power cable" may refer to the AC cable connected to the AC adapter collectively. Wipe off any dust from the power cable, metal parts on the power plug or metal fittings with a soft, dry cloth.Accumulated dust might cause fire or electric shock. Do not install the device in locations that has oil smoke, steam, humidity, and dust. Do not damage the AC cable. A damaged AC cable may cause fire or electric shock.
Do not use the scanner if there is a strange odor. Firmly insert the power plug. Firmly insert the power plug as far it can go into the power outlet. If you detect excessive heat coming from the device or detect other problems such as smoke, strange smells or noises, disconnect immediately the power plug in order to turn out the scanner. Make sure that any smoke coming from it has stopped, before contacting the store where you bought the scanner or an authorized FUJITSU scanner service provider.
Do not install the scanner in direct sunlight. Do not install the scanner under direct sunlight or near heating apparatus. Doing so might cause excessive heat to build up inside the scanner, which can cause scanner trouble or even fire. Install the scanner in a well-ventilated location. Before moving the scanner, make sure the shipping lock is locked. When moving the scanner, be sure to lock the shipping lock in order to prevent damages to the scanner.
Chapter 1 PREPARING THE SCANNER ■ Rear 1.1 Checking the Contents of the Scanner Package Shipping lock When you open the scanner package, please handle the main unit and its attachments carefully. Make sure it contains all the parts listed in the package contents list that is included in the package box. If any parts are missing or defective, contact your sales representative. Handle the scanner and accessories with care. DC inlet Security slot 1.
Chapter 2 INSTALLATION OF THE SCANNER ■ Installing the TWAIN Scanner Driver 2.1 Installing the Scanner Application Both the scanner driver and image capturing application software (called "application" hereafter) must be installed on your PC. Two types of drivers are available for this scanner, a TWAIN Scanner Driver and a ISIS Scanner Driver, as well as two software applications, ScandAll PRO Lite and QuickScan Pro™ (Trial), are provided with this product.
■ Installing ScandAll PRO Lite 4. Select a language used for installation on [Choose Setup Language] window and click [Next]. "Scandall PRO Lite" is an image capturing software that complies with the TWAIN standard. The TWAIN scanner driver enables you to capture images with a FUJITSU image scanner fi-series product. ATTENTION Log on as a user with "Administrator" privileges (privileges of the administrator of your PC). 1. Insert the Setup DVD-ROM into the DVD drive.
⇒ appears. 5. When the [InstallShield Wizard Complete] window appears, click [Finish]. ATTENTION This screen may not appear when the "Autoplay" setting of your PC is OFF. In this case, run "AutoPlayer.exe" in this DVD-ROM directly from the "Explorer" or "My Computer". 3. Click [INSTALL], and then click [ISIS Driver]. ATTENTION To finish the installation, it may be necessary to restart your computer. Follow the instructions on the window. For ISIS Scanner Driver 4.
enables you to capture images with a FUJITSU image scanner fi-series product. ATTENTION Log on as a user with "Administrator" privileges (privileges of the administrator of your PC). 1. Insert the Setup DVD-ROM into a DVD drive. ⇒ appears. 2. Click [INSTALL], and then click [QuickScan Pro (Trial)]. ATTENTION "QuickScan Pro™" included in the Setup DVD-ROM is an evaluation version.
2.3 Connecting the Scanner to Your PC (locked) ■ Connecting the USB Interface Cable 1. Connect the USB interface cable to the USB interface connector. (unlocked) 3. Connect the AC adapter. ATTENTION Use only the AC adapter and cable provided by the manufacturer. 1) Connect the AC cable to the AC adapter. 2. Connect the other end of the USB interface cable to the PC. Your scanner will be automatically detected. For Windows 2000: When [Digital Signature not Found] appears, click [Yes].
2.4 Confirming the Installation ■ Confirming with ScandAll PRO Lite 1. Load a document on the Scanner. For details on how to load documents, refer to the "1.2 Loading Documents on Scanner for Scanning" in the fi-60F Operator’s Guide provided in the DVD-ROM. 2. Start ScandAll PRO Lite. Select [Start] - [All Programs] - [Fujitsu ScandAll PRO Lite] - [Fujitsu ScandAll PRO Lite]. 3. Specify the scanner (that you will use). HINT Select [Select Source...] from the [Scan] menu of ScandAll PRO Lite.
3. Select [Select Scanner...] from [Scan] menu in QuickScan Pro™. If the scanning completes without any trouble, the installation performed successfully. 4. Select fi-60F from the list of [Scanner:], and then click the [OK] button. HINT Refer to "QuickScan Overview" or "QuickScan Help" for information about QuickScan Pro™ functions and operations. On the [Start] menu, point to [All Programs]-[QuickScan] and click the file. 2.5 Installing Adobe® Reader® 5. Click [OK] button.
Appendix 1 TROUBLESHOOTING ■ Troubleshooting checklist Symptom Scanner does not turn on. Scanning does not start. Images are distorted or blurred. There is a shadow on the leading edge of the scanned image. Check this item Remedy Are the AC cable, AC adapter and the USB cable properly connected to the scanner? Correctly connect the AC and USB cable and the AC adapter.
Symptom When the document is scanned in Black & White mode, the image generated becomes black. Automatic paper size detection is failed. Check this item Remedy Are the Document holding pad and the Document bed of the scanner clean? Clean the dirty locations as instructed in the Operator's Guide "2. Daily Care". Have you tried to adjust the settings of the scanner driver (Threshold or Brightness)? Adjust the Threshold and/or Brightness.
Appendix 2 DAILY CARE Do not use any aerosol sprays or alcohol based sprays to clean the scanner. Dust blown up by strong air from the spray may enter the inside of the scanner. This may cause the scanner to fail or malfunction. Sparks, caused by static electricity, generated when blowing off dust and dirt from the outside of the scanner may cause a fire.
fi-60F Image Scanner Getting Started P3PC-1102-07EN Date of issuance: November, 2011 Issuance responsibility: PFU LIMITED Copying of the contents of this manual in whole or in part and copying of the scanner application is forbidden under the copyright law. z The contents of this manual are subject to change without notice. z PFU LIMITED.
