Quick Instruction Manual

Before using the terminal
19
◆ Charging with AC adapter
Charging with the optional AC Adapter 04 is described.
a Open the external connection jack cap of the
terminal, insert the microUSB plug of the microUSB
cable horizontally into the external connection jack
with engraved side facing up
b Insert the AC adapter's power plug into an outlet
･ Indication light lights red while charging, and turns
off when charging is complete.
c When charging is complete, remove the AC adapter's
power plug from the wall outlet
d Remove the microUSB plug from the terminal and
close the external connection jack cap of the terminal
◆ Charging with a PC
If you connect the terminal with a PC using a USB Cable
A to C 01 (optional), you can charge the terminal with a
PC.
･ When a screen of new hardware detection or
operation selection appears on the PC, close the
terminal.
◆ Turning power ON
1
Press f for 2 seconds or more
The terminal vibrates once, after a short time a
waterproof confirmation message is displayed, and
Standby screen will appear.
･ The terminal may turn on by pressing f several
times in a row instead of pressing it for 2 seconds
or more.
･ When the terminal is turned on for the first time
◆ Turning power OFF
1
Press f for 2 seconds or more
The terminal vibrates twice, a shutting down
message is displayed, and the terminal turns off.
For the first time you turn the power ON, a confirmation
screen appears. Make settings or perform operations as
required. The settings can be changed later.
･ After turning ON for deleting all the data, the setting
screen is displayed in the same way.
･ If you turn the power OFF with some settings not made
in the initial settings, unset items appear again when
you turn the power ON next time.
･ If the confirmation screen of sending the terminal error
information is displayed, press
g .
1
On the screen for preparation before using
the terminal,
g
2
Following the onscreen instructions to set
each item
音声読み上げ (Text-to-speech) ： Set whether to let
the terminal read information on the screen or
operation.
メニュー形式 (Menu form) : Select the menu format.
端末暗証番号 (Terminal security code) : Change the
terminal security code for operating each
terminal.
･ By default, "0000" is set.
歩数計／活動量計 (Pedometer/Activity meter) :
Enter and set the height/weight. → p.xxx
3
On the docomo service setting screen, g
4
Check each caution and press " 同意する
(Agree)"
5
Follow the onscreen instructions to set each
item
d アカウント (d account) : Set the d account for
DOCOMO applications.
ドコモ位置情報 (docomo location information) : Set
whether to provide the location information of
the terminal.
6
On the setting complete screen g
The Standby screen appears.
Turning power ON/OFF
Initial settings