Tablet Accessory User Manual

Figure 3. Inserting Tablet PC into HEC

Installing a Screen Protector

1. To ensure good adhesion, clean the exterior surface of

the HEC window with a soft cotton cloth dampened

with isopropyl alcohol before installing the screen pro-

tector. If streaking occurs, gently buff the surface with a

clean, soft cloth.

2. Peel the protective film from the adhesive side of the

screen protector as shown in Figure 4.

3. Apply the screen protector with the adhesive side down

and the notch in the lower left corner as shown in Figure

5. Apply pressure along the edges of the screen protector

with your finger. Avoid lifting the screen protector from

the display window after it is installed. The adhesive

requires 48 hours to cure completely.

FPC58-0720-02.fm Page 4 Wednesday, January 7, 2004 3:08 PM