Micro Line Thermal Printer Specification Sheet

FTP-624MCL001/002/FTP-624DCL/DSL

For head

Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)

Peak current: approx. 2.6 A (conditions: room temp., 7.2 VDC, 64 dots on)

For motor

Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)

Peak current: approx. 0.8 A (conditions: room temperature, 7.2 VDC)

For logic

Voltage: 5 VDC ± 5%

Current: 0.2 A maximum

Mechanism 82 (W) × 46 (D) × 20 (H) mm (excluding lever and knob diameter)

Dimensions

Interface board 131 (W) × 89 (D) × 24 (H) mm

Weight (Mechanism) Approximately 80 g

Expected life Mechanism Pulse durability: 1 × 10

pulse/dot (using Fujitsu Takamisawa's standard

driving method)

Wear resistance: 50 km (at 12.5% print ratio)

Operating temperature 0 to +50°C*

Operating humidity 20 to 85% RH (no condensation)

Storage temperature –20 to +60°C (excluding paper)

Storage humidity 5 to 95% RH (no condensation)

Head temperature By thermistor (applied energy control, abnormal temperature detection)

Detection Paper out/Mark detect By photointerrupter

Head-up By microswitch

For front insertion use (58 mm width) : FTP-020PU001, FTP-020PG021

For rear insertion use (60 mm width) : FTP-020P0020, FTP-020PG106

Recommended thermal sensitive paper

In Europe (58 mm width) : FTP-021P0060-45

· Oji Paper : PD150R, PD160R, PD170R

· NIPPON Paper : TF50KS-E4,TF60KS-E,TF50KS-E

· MITSUBISHI Paper Mills : P220VBB-1, AFP-235

SpecificationsItem

(Continued)

Power

supply

Environmental

conditions

*1: There may be exceptions.

*2: Guarantee +5°C to +40°C.