Datasheet

1
FTR-K1 SERIES
n FEATURES
l DPDT 2C
l Ultra miniature low prole relay with high heat resistant material
l Height: 5.45mm, Weight: 0.85g, Mounting space: 87mm2
l Adopted superior contact spring for high frequency characteristic
l Comply with Telcordia / FCC standard
- Isolation distance: min. 1.6mm
- Dielectric strength between coil and contact: 1500VAC
- Surge strength: 2500V
l Low power: Non-latching: 140mW (230mW at 24V)
Latching: 100mW (120mW at 24V)
l High reliable bifurcated gold overlay silver contact
l UL, CSA recognized. Conrms to IEC 60950, UL1950,
EN60950. Spacing & high breakdown voltage (basic
insulation, 150 working volts, pollution degree 2)
l RoHS compliant.
Please see page 9 for more information
Remarks: Actual marking on relay would not carry code FTR and be as below:
Ordering code: FTR-B3GB012Z-B10 Actual marking: B3GB012Z
* 1 Only surface mount types (G and S) are applicable
* 2 All relays are packaged in tubes unless part number ends with -B10 (50 relays per tube).
ULTRA MINIATURE RELAY
2 POLES - 2 A (Low Prole Signal Relay)
n PARTNUMBER INFORMATION
FTR-B3 G B 012 Z - B 10
[Example] (a) (b) (c) (d) (e) (f) (g)
FTR-B3 Series
(a) Relay type FTR-B3 : FTR-B3-Series
(b) Terminal type C : Through hole
G : Surface mount
S : Surface mount, space saving
(c) Coil type A : Standard type
B : Latching type (1 coil)
(d) Coil rated voltage 012 : 1.5.....24 VDC
Coil rating table at page 3
(e) Contact material Z : Gold overlay silver nickel
P : Gold overlay silver palladium
(f) Relay enclosing direction *
1
B : Standard enclosing direction
(g) Number of relays per reel *
2
10 : 1,000 (standard)