Datasheet

Chapter 2 Standard Operations

2.1 Powering On and Off

ETERNUS DX60 S2 Disk storage system User’s Guide -Operation-

3 Check that all enclosure's POWER LED and READY LED are lit up.

End of procedure

2.1.3 Powering Off

This section explains how to turn off the ETERNUS DX Disk storage system.

Controller enclosure

Drive enclosure

LED for drive enclosure

LED for controller enclosure

IMPORTANT

• When turning off the ETERNUS DX Disk storage system, the power

shuts off after the data in the cache memory is written to the disk.

Therefore, it may take one minute (maximum six minutes) for the power

supply to be completely turned off.

• Do not turn off the power of the device or network devices that connect

the ETERNUS DX Disk storage system and server while the server is

operating. Turning the power off may result in the loss of data or prevent

data from being saved.