Operation Manual

Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of w hen working with your device.
Safety notes
SafetynotesNote
Please follow the safety
notes provided in the "Safety/Regulations" manual
as well as the safety n ote
s given below.
When installing and ope
rating the device, please observe the notes on ambient
conditions in "
Technic
al data ", Page 61 and the instructions in "Getting started", Page 16.
Replace the lithium ba
ttery on the mainboard exactly in accorda nce with the
instructions in the "
R
eplacing the lithium battery", Page 59 chapter.
Caution, componen t
s in the system can get very hot.
The activities desc
ribed in these instructions must always be
performed with the
greatest care.
Repairs to the devi
ce must only be carried out by qualified te chnicians. Incorrect
repairs could put
the user at great risk (electric shock, hazardous energy emissions,
risk of fire) or cau
se se rious damage to th e equipment.
Operate the devi
ce only with the casing closed.
Power cable and mains adapter:
The s upplied power cable conforms to the requireme nts of the country in
which you purchased your device. Make sure that the po wer cable is approved
for use in the country in which you intend to use it.
The mains adapter’s power cable should only be connected to a m a ins
socket if the device is connected.
Do not use the mains adapter for other devices.
Use only the mains adapter which is intended for use w ith the device,
see chapter "
Technical data ", P age 61.
Make sure that the rated current of the mains adapter is not higher than that of
the power system to which you connect the mains adapter.
ON/OFF switches do not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the p ower socket.
10 Fujitsu