Operation Manual

Operation
Switching off the device
► Shut down the operating system in the proper way. In Windows: from the
Start menu select the Shut Down option.
Device,Monitor,
► If the operating system does not automatically switch the device into energy-saving mode or
switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!

If the d evice is switched off, it consumes a minimum of energy.
The ON/OFF switch does not disconnect the device from the mains voltage. To
completely disconnect the mains voltage, remove the power plug from the power socket.
► If necessary, switch the monitor off (see the ope rating manual for the monitor).
Activating power saving mode (FUJITSU Thin
Client FUTRO on ly)
Due to customer re
quirements a nd requirements of t he operating system, the
"Wake-on-LAN" (W
oL) function is switched on by default. With the WoL function,
the power draw in O
FF mode increases slightly.
To meet the requi
rements of EC regulation 1275/2008 regarding th e implementation of the
Ecodesign direc
tive (2009/125/EC), the defa ult WoL setting must be changed as follows:
► To start the BI
OS Setup Utility after system boot, press function key
F2
or the
Del
key.
► In the Power sub-menu, select the Low Pow er Soft Off setting and switch it to enabled.
► To save the set
ting and exit the BIOS Setup Utility, press function key
F4
.

After making this chan ge, the system will achieve the lowest energy
saving mode during shut-down.
In this st at
us, the “Wake-on-LAN” function can no longer be used.
Open BIOS Setup
BIOS-Setup
► When the system starts, press the
F2
key (several times if necessary).

BIOS Setu
p will be started. Select one of t he tabs to access other setting options in BIOS Setup.
PXE system boot
PXEsystem boot
► SwitchthedeviceonwiththeON/OFFswitch.
► When s
tarting the system, press the
F12
key several times.

The boot menu is displayed.
► Sele
ct the desired boot option.
Fujitsu 27