Operation Manual
System expansions
3
2
2
1
4
► Place the SmartCard reade r on the carrier with the component side facing
downwards, in the direction of the arrow (1 ).
► Fasten the SmartCard reader onto the carrier with the screws (2).
► Connect the cable to the SmartCard reader (3) and to the connector o n the mainboard (4).
► When required, reinstall the cross piece and the PCIe board (see "
Installing the board", Page 56).
► Close the casing (see "
Closing the ca sing", Page 60).
Make sure that the ca bles are not trapped between the casing and the com ponents.
36 Fujitsu