Operation Manual
System expansio ns
Removing the loud speaker
Loudspeaker
► Open the housing (see "O pening the casing", Page 32).
► If a PCIe board is installed, you must rem ove the cross piece and PCIe
board (see "
Removing the board", Page 58).
1
2
2
► Disconnect the loudspeaker cable from the mainboard (1).
► Undo the screws ( 2).
► Lift the loudspeaker out of the housing.
► When required, reinstall the cross piece and the PCIe board (see "
Installing the board", Page 56).
► Close the hou sing (see "
Closing the casing", Page 60).
Installing and removing a speaker: FUJITSU
Desktop ESPRIMO A525-L
Before installing a speaker in the FUJITSU Thin Client ESPRIMO
A525-L, you must first remove the hard disk.
Fujitsu 41