Operation Manual
System expansions
Removing the board
Board,
► Open the casing (see "Opening the ca sing", Page 32).
1
2
► Loosen the screw (1).
► Remove the board from the riser card (2).
You must reinstall the rear slot cover plate due to cooling, fire pro tection a nd the EMC
regulations (regulations on electromagnetic compatibility) to be complied with.
► Reinstall the rear slot cover plate by inserting it in the installation slot from
the inside and securing it with the screw.
► Close the casing (see "
Closing the ca sing", Page 60).
58 Fujitsu