Operation Manual

Getting started
Connecting a USB mouse
► Connect the USB m ouse to one of the USB ports on the device.
Connectinga USBmouseUSBport
Connecting a USB keyboard
Only use the keyboard cable supplied with the keyboard (not within the delivery scope of the device).
USBportConnecting
► Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Ins e rt the flat rectan gula
r USB plug of the keyboard cable into a USB port of the device.
USBport
Connecting external devices to the USB ports
USBdevices,USBport,Externaldevices,Devices,
You can connect a wide range of external devices to the USB ports (e.g.
printer, scanner, modem or keyboard).
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
► Connect the data c ab
le to the external device.
► Connect the data cable to one of the U SB ports on your device.
Device drivers
The external USB devices that you connect to one of the USB ports usually
require no driver of their own, as the required software is already included
in the operating system. If the device requires separate softw are, please
note the information in the manufacturer’s manual.
To ensure the USB transmission capacity, the cable from the external USB device
to the USB port of your device must not be longer than 3 m.
Fujitsu 27