Operation Manual

Getting started
Headphone port
Connectingaudio devicesAudioportsConnectingheadph ones
You can connect headphone s or external loudspeakers to y our system via the headphone port.
► Connect the aud io cable to the
external device.
► Connect the audio cable to the h eadphones
port of the system.

The internal loudspeakers are disabled.
If you purchase a cable from a retailer, ple ase note the following informa tion:
The headphones port on y our system is a "3.5 mm jack socket".
If you want to connect headp hones or a speaker you will need a "3.5 mm jack plug".
Switchingonforthefirst tim e: installing the software
Installing,Software,Installing,
Once the installation ha s been started the device m ust not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the device is integrated into a network, the user and server de tails as well as
the network protoco l are required during the software installation.
Contact your network administrator if you have any questions about these s ettings.
When you switch on the device for the first time, the supplied software
is installed and configured. Plan a reasonable amount of time for this,
as this process m ust not be interrupted.
You may need the licence number for Windows during the installation. The licence
number is located on a sticker on your device.
Fujitsu 29