Operation Manual

Operation
Select OSD language
After switching on for the first time, the language selection menu of the display is displayed:
► Press the
(4th button from left) / button or the (5th button fr om left)
/
button, to select the desired lan guage.
► Press the
MENU
/ buttontoconfirm.
After selecting the OSD language for the first time, you can change
it a t any time in the OSD.
Activating/deactiv
ating ECO operating mode
The power con sump tion of the device can be d ecreased by reducing
the brightness of the picture.
► To activate or deactivate ECO operating mode, press the
ECO
button.

The message ECO Mode on or ECO Mode off is displayed.
If you press the
ECO
button, the brightness of the monitor is reduced to an energy saving status.
After ending ECO mode, the previously set brightness is restore d.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press the
ECO
and buttons (5th button from left) simultaneously for a few seconds.

The message OSD locked / unlocked is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Fujitsu 33