Operation Manual

Operation
Notes on ergonomic colo ur adjustment
If you select colours for the monitor in your application programmes,
take note of the information below.
The primary colours blue and red on a dark backg round do not produce the minimum
required contrast of 3:1 and are there fore not suitable for continuous text and data entry.
When using s everal colours for characters and backgrou nd and giving the primary colours full
modulation, you can obtain very suitable colour combinations (see the following table):
Characters
Background
black white purple blue
cyan green
yellow red
black
++
-
+++
-
white
+++
---
+
purple
++
-----
blue
-
+
-
+
-
+
-
cyan
+
--
+
---
green
+
--
+
---
yellow
+
-
++
--
+
red
-
+
----
+
+ Colour co mbination very suitable
- Colour combination not suitable because colour hues are too close together, thin characters
are not identifiable or r igorous focusing is demanded of the human eye.
Preset operating modes
The picture position and size have been set to optimum values at th e
factory for the operating m odes listed above.
For ergonomic reasons, a screen resolution of 1920 x 1080 pixels is reco mmended.
Because of the technology used (active matrix), an LCD mo nito r p rovide s a
totally flicker-free picture, even with a refresh rate of 60 Hz.
38 Fujitsu