Operation Manual

Operation
Power over Ethernet module for FUTRO
X913/X913-T (optional)
Ethernetmodule
Your FUTRO can be equipped w ith an optional Power over Ethernet module.
Using the Power over Ethe
rnet adapter, you can operate the FUTRO via the LAN without an
additional power connec
tion. To do this, you will need a corresponding network infrastructure.
To operate the FUTRO via
the Power over Ethernet adapter, midspan devices (power supply via
intermediary sources,
such as PoE injector) with a power output of 60 W and shielded CAT-5
network cable or highe
r quality c able are required. Endspan devices (direct power supply via
a PoE switch) are only s
upported in connection with a hardware classification.
Fujitsu recommends
the use of the following midspan devices:
• 1-port midspan from
Microsemi PD-9501G: S26361-F1744-L10
• 12-port midspan from Microsemi PD-9512G: S26361-F1744-L20
When operatin g the FUTRO via the Power over Ethernet adapter, the external
USB power output is limited to max. 5 watts.
Fujitsu 47