Operation Manual

Operation
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOSSetupUtilitySetupSystem configurationHardwareconfiguration
The BIOS Setup Utilit y allows you to set th e system functions and the
hardware con figuration for your device.
When it is supplied, the device is set to factory default setting s. You can change
these settings in the BIOS Setup Utility menu. Any chang es you make take effect
as soon as you save and exit the BIOS Setup Utility.
The BIOS Setup Utility program contains the following menus:
Menu Description
Main
System settings such as
time and date
Advanced
Advanced system s etti
ngs
Security
Password settings and s ecurity functions
Power
Energy saving function
Event Logs
Protocol settings
Boot
Configuration of t
he start-up sequence
Save & Exit
Exits the BIOS Se
tup Utility
The following function keys can also be used:
Key Description
Esc
To exit the BIOS S e tu p Utility.
The current settings are not saved.
F2
To reject changes and load the previous configuration of the BIOS Setup
Utility.
F3
To load t he
default configuration of the BIOS Setup Utility.
F4
To exit the
BIOS Setup Utility.
The curre
nt settings are saved.
Starti
ng the BIOS Setup Utility
► Reboot the device (switch off/on or reboot the operating system).
BIOSSetupUtility

The fol
lowing or a similar display appears on the screen at start-up:
<F2> BIOS Setup <F12> Boot Menu
► Press the function key
F2
.
► If a p
assword has been assigned, enter the password and press the Enter key.
If y
ou have forgotten the password, contact your system administra tor
or c
ontact our customer service centre.
The BIOS Setup Utility starts.
48 Fujitsu