Operation Manual

Troubleshooting and tips

Refer to the safety notes in the "Safety/regulations" manual and in th e "Getting

started", Page 19 chapter when connecting or disconnecting cables.

If a fault oc c u rs, try to c

orrect it as described in the following documentation:

• in this chapter

• in the documentation for the connected devices

• in the help systems of th

esoftwareused

• in the documentation for your operating system

Help if problems occur

Should you e ncount

er a problem with your computer that you cannot resolve yourself:

► Note t h e ID number

of your device. The ID numb er can be found on the type

rating plate on t h

e underside of the device.

► For further clariﬁcation of the problem, contact the Service Desk for your country (see the

Service Desk list or visit the Internet at "

http://support.ts.fujitsu.com/contact/se rvicedesk"). When

you do this, please have r eady the ID number and serial number of your system.

Troubleshooting

Power-on indicator remains unlit after you have

switched on y our device

Cause

Troubleshooting

The mains voltage supply is faulty. ► Check tha t the power cable is properly

plugged into the device and into the mains

socket.

Internal power supply overloaded.

► Unplug the power plug of the device from

the mains socket.

► Wait app

rox. 3 min.

► Plug the power plug of the device into the

mains socket again.

► Switc

h the device on.

52 Fujitsu