Technical data

Working with the noteb ook
Removing a SIM card
► Prepare for removal of the SIM card, see chapter "Preparing to remove components", Page 61.
2
1
a
► Pull the SIM card slider tra y from the slot (1).
► Remove the SIM card (a) from the
SIM card slider tray.
► Push the SIM ca rd slider tray back
into the slot (2).
► C omplete the removal, see chapter "
Finishin g component removal", Page 66.
Wireless LAN/Bluetooth/UMTS/LTE radio components
The installation of radio components not approved by Fujitsu Technology Solutions
will invalidate the certifications issued for this device.
Switching the wireless components on and off
► Press the button to start the WirelessSelector.

The radio componen t indicator will be illuminated when one or more
radio components is switched on.
If you switch off the radio componen ts, the wireless LAN antenna and the
Bluetooth and UMTS/LTE module will also be switched off.
You can enable and disable the installed radio components individually
using the WirelessSelector programme
Pay attention to the additional safety notes for devices with radio compo nents
provided in the "Safe ty/R egulatio ns" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN softwa re.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS/LTE from your service provider.
40 Fujitsu