Technical data

Security functions
Deactivating hard disk protection
To ca ncel a password without setting a new one, proceed as follows:
Call up the BIOS Setup and select th e Security menu.
Mark the Hard Disk Security eld and press the Enter k ey.
In the Drive0 area mark the Set Master Password eld and press the Enter key.
Yo u will be initially requested to enter the old password by the Enter current Password prompt.
Yo u will then be requested to enter a new p assword by th e Enter new Password prompt.
After entering the password, press the Enter key three times.
Fr om the Exit menu, choose the option Exit Saving Changes.
Press the Enter key and select Yes.
The notebook reboots, and password protection fo r the hard disk is cancelled.
To cancel the password for the second hard disk (Drive1), go to the Drive1 area
and select the eld Set Master Password, then proceed in exactly the same way as
for c ancelling the password for the rst hard disk (Drive0).
Password protection for booting of the operating system
With th e supervis
or HDD password you have set in the BIOS Setup Utility (see
section ), you can
also prevent booting of the operating system.
Operating system
Activating system protection
Start the BIOS Setup Utility and go to the Security menu.
Operatingsy
stem
Select the PasswordonBootoption and press the En ter key.
Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key
Select the Save Changes & Exit option under Exit.
The notebook will r eboot. You will b e prompted to en ter your password
(the supervisor HDD password).
Deactivating system protection
Start the BIOS Setup Utility and go to the Security menu.
Operati
ngsystem
Select the PasswordonBootoption and press the En ter key.
Select the Disabled option and press the Enter key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
Select the Save Changes & Exit option under Exit.
The noteboo k will reboot. The system is no longer password-protected.
Fujitsu 49