Interstage Application Server V6.
Product Notes Trademarks Trademarks of other companies are used in this user guide only to identify particular products or systems: Product Trademark/Registered Trademark Microsoft, Visual Basic, Visual C++, Windows, Windows NT, Internet Information Server, and Internet Explorer Registered trademarks of Microsoft Corporation in the U.S.A. and other countries Sun, Solaris, Java, and other trademarks containing Java Trademarks of Sun Microsystems, Inc., in the U.S.A.
Preface Purpose of this Document This manual provides additional information on the use of Interstage Application Server Note Throughout this manual Interstage Application Server is referred to as Interstage. Who Should Read this Document? This document is intended for users installing and operating Interstage Application Server.
Product Notes - Preface Organization of this Document This document is organized as follows: • Chapter 1 - Supported Software This chapter describes the supported software for application development and application execution. It also describes the client-side software products required to use client applications. • Chapter 2 - Restrictions This chapter describes the restrictions on some Interstage functions.
Table of Contents Chapter 1 Supported Software Software Products Required for Application Development.............................................................1-2 J2EE (Exclude Security) ............................................................................................................1-2 Security ......................................................................................................................................1-3 Operation / Administration ....................................
Product Notes - Table of Contents Restrictions on Java Programming..........................................................................................2-18 Restrictions on the Naming Service.........................................................................................2-18 Restrictions on the CORBA Service ........................................................................................2-19 Restrictions on the Event Service .............................................................
Product Notes - Table of Contents Notes on Operating Interstage HTTP Server ..........................................................................3-12 Notes on J2EE ..............................................................................................................................3-13 Notes on the Servlet Service ........................................................................................................3-15 Notes on Using the EJB Service...........................................
Product Notes - Table of Contents Notes on InfoDirectory ..................................................................................................................3-32 Setup Item Related to the Maximum Simultaneous Number of Clients Connected ................3-32 Error Messages in the Event Log ............................................................................................3-32 Notes on JDK/JRE .............................................................................................
Chapter 1 Supported Software This chapter describes the supported software.
Chapter 1: Supported Software Software Products Required for Application Development This section describes software products required for application development. J2EE (Exclude Security) Table 1-1 lists the J2EE (exclude security) products required for application development. Table 1-1 J2EE (Exclude Security) Products Required for Application Development No.
Software Products Required for Application Development Use the product since V4.0L10 when you use either Symfoware Server Enterprise Edition or Symfoware Server when you use the Symfoware with RDB2_TCP. When the decentralized transaction function by JTS and JTA is used, Oracle8i Enterprise Edition R8.1.7 or Oracle 9i Database Enterprise Edition is required. Use the Interstage JDBC Driver included while packaging the EJB Service when you use SQL Server. Refer to the associated software manual when using it.
Chapter 1: Supported Software Operation / Administration Table 1-3 lists the operation/administration products required for application development. Table 1-3 Operation/Administration Products Required for Application Development No. Function Name Product Name Version 1 Real-time monitoring by performance monitoring tool and operation management linked to Systemwalker Systemwalker CentricMGR V5.0L20 or V5.
Software Products Required for Application Development *2) If the version level of Systemwalker OperationMGR to be linked is V5.0L20, the EJB WorkUnit (for old version compatible environment) cannot be operated automatically. The following functions also cannot be used if the version level of Systemwalker OperationMGR is V10.0L10 or earlier.
Chapter 1: Supported Software No. Function Name Product Name Version 3 Use of databases Symfoware® Server Enterprise Edition for Windows V2.0L10 or later edition Oracle7 R7.3.4 (*2) Oracle8 Enterprise Edition R8.0.5 (*2) Oracle8i Enterprise Edition R8.1.5 or R8.1.6 (*2) R8.1.7 Oracle9i Database Enterprise Edition Release1 (9.0.1) SQL Server 6.5 or 7.0 4 Development of applications using LDAP SDK Microsoft® Visual C++ 5.0, 6.0, .
Software Products Required for Application Execution Software Products Required for Application Execution This section describes software products required for application execution. J2EE (Exclude Security) Table 1-6 lists the J2EE (exclude security) products required for application execution. Table 1-6 J2EE (Exclude Security) Products Required for Application Execution No. Function Name Product Name Version 1 Employment of the application which uses a database Oracle8i Enterprise Edition R8.1.
Chapter 1: Supported Software − providerutil.jar − fscontext.jar *3) If Netscape 4.7 type is used, a screen display error may occur. *4) Microsoft Internet Information Services 6.0 or later cannot be used. Security Table 1-7 lists the security products required for application execution. Table 1-7 Security Products Required for Application Execution No. Function Name Product Name Version 1 SSL communication function of Web Server, CORBA Service, Portable-ORB and J2EE.
Software Products Required for Application Execution *1) If the version level of Systemwalker CentricMGR to be linked is V5.
Chapter 1: Supported Software Framework Table 1-9 lists the framework products required for application execution. Table 1-9 Framework Products Required for Application Execution No. Function Name Product Name Version 1 Using database linkage components of the framework function Oracle Database Enterprise Edition / Standard Edition Release1(9.0.1), or Release2(9.2.0) Symfoware Server Enterprise Edition V5.
Software Products Required for Application Execution *2) It is possible to change the repository (Fujitsu Enabler) of the Portal component installed by default to RDB by using the repository change command immediately after installation. For more details, refer to the Portalworks Administration Guide. Other Functions Table 1-11 lists the products required for application execution (other functions). Table 1-11 Products Required for Application Execution (Other Functions) No.
Chapter 1: Supported Software Client-side Software Products Required to Use Client Applications This section describes the client-side software products required to use client applications. J2EE (Exclude Security) Table 1-12 lists the J2EE (Exclude Security) client-side software products required to use client applications.
Client-side Software Products Required to Use Client Applications *4) Service Pack 1 or Service Pack 2 is necessary for Microsoft Internet Explorer 4.01. Also, Software Development Kit for Java V4.0 is necessary for creating cab files used in Microsoft Internet Explorer. *5) JDK1.1 and JDK1.2 are not supported. Security Table 1-13 lists the security client-side software products required to use client applications.
Chapter 1: Supported Software Other Functions Table 1-15 lists the client-side software products required to use client applications (other functions). Table 1-15 Client-side Software Required to Use Client Applications (Other Functions) No Function Name Product Name Version 1 WWW Server Linkage Netscape Communicator 4.0, 4.01, 4.02, 4.03, 4.04, 4.05, 4.06, 4.07, 4.08, 4.5, 4.51, 4.6 or 4.7 Microsoft Internet Explorer 4.0, 5.0, 5.01 or 5.5 (*1) INTERSTAGE APWORKS Client Runtime package V4.
Chapter 2 Restrictions Some functions described in this manual have restrictions. The following tables detail these restrictions.
Chapter 2: Restrictions Restrictions on Interstage HTTP Server Table 2-1 Restrictions on Interstage HTTP Server No.
Restrictions on InfoProvider Pro Restrictions on InfoProvider Pro Table 2-2 Restrictions on InfoProvider Pro No.
Chapter 2: Restrictions Restrictions on the J2EE Service Table 2-3 Restrictions on the J2EE Service 2-4 No. Restriction Remarks Date of Removal 1 If the EAR file is opened using the J2EE Deployment tool and the Application Display Name of the application is changed, some contents such as class files may not be displayed in the General contents of the Web application. None. Not determined 2 When the J2EE Deployment tool is used, a save confirmation dialog box appears before closing a file.
Restrictions on the Servlet Service Restrictions on the Servlet Service Table 2-4 Restrictions on the Servlet Service No. Restriction Remarks Date of Removal 1 When Apworks is used for remote debugging, the following may occur: Ignore this message. Not determined Start the debug of Apworks after starting the Servlet service.
Chapter 2: Restrictions Restrictions on the EJB Service Table 2-5 Restrictions on the EJB Service No. Restriction Remarks Date of Removal 1 The long type data type cannot be used as an argument or return value for the client/server communication. None Not determined 2 In JDK/JRE 1.2.2, any class in which String data of 64 KB or more is set to one variable in the class cannot be used as an argument or return value for EJB applications.
Restrictions on the EJB Service No. Restriction Remarks Date of Removal 7 If any of the above methods are called from one of the following methods, an exception will be thrown. None Not determined None Not determined None Not determined - getCallerIdentity() - getCallerPrincipal() - isCallerInRole(Identity role) - isCallerInRole(String roleName) If any of the above methods are called from one of the following methods, an exception will be thrown.
Chapter 2: Restrictions No. Restriction Remarks Date of Removal 12 Currently (May 2002), no database supports JDK1.4, and therefore, no database can be accessed from EJB when JDK1.4 is used. None. Not determined 13 When the user snap function is used with JDK1.4, the log information of the product in which the java.util.Logging package is installed may be output to the EJB snap file. None. Not determined 14 The EJB application that implements both Local and Remote interfaces cannot be used.
Restrictions on the EJB Service No. Restriction Remarks Date of Removal 18 In a specific method of the EJB application that implements both Local and Remote interfaces, the following API of javax.ejb.SessionContext or javax.ejb.EntityContext is executed, it returns Null. None. Not determined None. Not determined See Note 1 below Not determined [getEJBLocalObject] When this method is executed, the following methods return Null.
Chapter 2: Restrictions [EJB application development] 1. Deployment Edit descriptor Edit not to duplicate EnterpriseBean reference name for “ejb-ref-name” in the “reference EJB tag” or“reference LocalEJB tag”. 2. Development of EJB applicationDescribe not to duplicate the EJB application name specified for the argument at lookup via LocalHome interface and via Home interface.
Restrictions on the SOAP Service Restrictions on the SOAP Service The SOAP Service can be used with the following products: • Interstage Application Server Enterprise Edition • Interstage Application Server Standard Edition • Interstage Application Server Plus Table 2-6 Restrictions on the SOAP Service No.
Chapter 2: Restrictions No. Restriction Remarks Date of Removal None Not determined None Not determined When this occurs, the following message will be output: UX: ISSOAP: ERROR: issoap1563: Method invoke error : java.io.IOException: java.io.
Restrictions on the CORBA Service Restrictions on the CORBA Service This section provides information on the restrictions on the CORBA Service.
Chapter 2: Restrictions No Restriction Alternative Method Date of Removal 3 Preprocessing declarations cannot be used under the following conditions: None Not determined None Not determined None Not determined 1) In an exception declaration 2) In a struct/union/enum declaration, and in a member declaration (ending before a semicolon) Example: struct STR1{ long #pragma version STR1 2.
Restrictions on the CORBA Service No Restriction Alternative Method Date of Removal 6 In the Java mapping of the IDL definition, the same name as the module name cannot be specified in the following declarations. When the same name is specified, a package name will become a module name + ‘Package’, and a Java compile error will occur.
Chapter 2: Restrictions No Restriction Alternative Method Date of Removal 7 When registering an updated IDL definition containing inheritance of two or more interface declarations in an interface repository, the inheritance cannot be registered in the repository under the following conditions: When creating IDL definition files to be registered in an interface repository, do not create the same interface declaration in different IDL definition files if two or more interface declarations are to be inh
Restrictions on the CORBA Service Restrictions on IDL Compilation The IDL compilation can be used with the following products: • Interstage Application Server Enterprise Edition • Interstage Application Server Standard Edition • Interstage Application Server Plus Table 2-8 Restrictions on IDL Compilation No Restriction Alternative Method Date of Removal 1 "-noinclude" cannot be specified for the IDL compiler.
Chapter 2: Restrictions Restrictions on Java Programming Java programming can be used with the following products: • Interstage Application Server Enterprise Edition • Interstage Application Server Standard Edition • Interstage Application Server Plus Table 2-10 Restrictions on Java Programming No. Restriction Alternative Method Date of Removal 1 The data type of the long long cannot be used in preinstalled type Java client and the Java server of JDK/JRE 1.2.2 and 1.
Restrictions on the CORBA Service Restrictions on the CORBA Service Table 2-12 Restrictions on the CORBA Service No. Restriction 1 The system may not release the CORBA Service port number (eg, 8002) when the isstop command is run. When the OD_start service was started (including execution of the isstart command) in this status, it is possible that a communication error occurs in the application.
Chapter 2: Restrictions Restrictions on the Event Service The Event Service can be used with the following products: • Interstage Application Server Enterprise Edition • Interstage Application Server Standard Edition • Interstage Application Server Plus Table 2-13 Restrictions on the Event Service No. Restriction Remarks Date of Removal 1 The following functions cannot be used in the dynamically generated event channels.
Restrictions on the Component Transaction Service Restrictions on the Component Transaction Service The Component Transaction Service be used with the following products: • Interstage Application Server Enterprise Edition • Interstage Application Server Standard Edition • Interstage Application Server Plus Table 2-14 Restrictions on the Component Transaction Service No.
Chapter 2: Restrictions Restrictions on the Database Linkage Service The Database Linkage Service can be used with the following products: • Interstage Application Server Enterprise Edition • Interstage Application Server Plus. Restrictions on the Locale of Languages Table 2-15 Restrictions on the Locale of Languages No.
Restrictions on InfoDirectory Restrictions on InfoDirectory Restrictions on the InfoDirectory Administration Tool Table 2-16 Restrictions on the InfoDirectory Administration Tool No. Restriction Remarks Date of Removal 1 Multiple management tool clients cannot simultaneously access the same directory server except for references. None. Not determined Ensure that, when a management tool client makes other than a reference, no other management tool client attempts to access the same directory server.
Chapter 2: Restrictions Restrictions on JDK/JRE This section describes the restrictions on JDK/JRE. Table 2-18 Restrictions on JDK/JRE No Restriction 1 In using JDK/JRE1.4.1_01 or JDK/JRE1.3.1_06 in Windows XP to run a Java application or a Java applet, the background color of menu groups is different from the background color of the menu bar. 2 In using the GUI lightweight components (JTextField or others) in JDK/JRE1.4.1_01, JDK/JRE1.3.1_06 or JDK/JRE1.2.
Restrictions on the Portal Component Restrictions on the Portal Component Restrictions on Scripts in Contents Table 2-19 Restrictions on Scripts in Contents No. Restriction Remarks Date of Removal 1 External contents with a script such as JavaScript, JScript, and VBScript written may not be displayed correctly with Portal component or a script may not operate correctly when the external contents are referenced via Portal component.
Chapter 2: Restrictions 5. 6. A script which can be rewritten with with() is evaluated. Exampl:with(document.F1){ target="newTarget"; acrion="action.cgi"; } When the window name is set by window.name or self.name, control in the brick frame of the Portal component is disabled. (When the back icon or home icon in the brick frame of the Portal component is clicked, another window opens and displays a content.) 7.
Restrictions on the Portal Component 4 In form authentication alternative logon, the maximum size of post data sent from a browser is 8K bytes. If this value is exceeded, the message below is recorded in an event log and the alternative logon fails. Send post data with length of 8K bytes or less. Not determined [Event log message] Failed to save proxy logon information. The parameter is incorrect.
Chapter 2: Restrictions Restrictions on Using Web USP (List of URLs to be Excluded With Form Authentication Inherited) Table 2-23 Restrictions on Using Web USP No. Restriction Remarks Date of Removal 1 For a dynamically created logon form, the same URL as an action URL from a logon form may be used for access to this logon form. If so, the function that inherits alternative logon and displays a new browser window does not operate.
Restrictions on Other Functions Restrictions on Other Functions Table 2-26 Restrictions on Other Functions No. Restriction Remarks Date of Removal 1 When "SystemWalker/CentricMGR" is installed in the same system, the "SystemWalker console job monitoring" function cannot be used. None Not determined None Not determined If a service listed in the column at left is to be uninstalled, reinitialize Interstage so that the service is not a target of initialization, and then uninstall the package.
Chapter 2: Restrictions 2-30
Chapter 3 Notes on Interstage Operation This chapter provides additional information on the use of Interstage Application Server.
Chapter 3: Notes on Interstage Operation Common Notes for Interstage About Netscape 6 Do not install Netscape 6 on the same system. About the Cross-Site Scripting Problem What is the Cross-Site Scripting Problem? The Cross-Site Scripting problem is a security problem that occurs when the client Web Browser sends input data based on a dynamically generated Web page back to the server. Static HTML pages and dynamically generated Web pages not using the data input, are not affected by this problem.
Common Notes for Interstage Countermeasures When any problem is detected, take one of the following actions. − Stop embedding input data into Web pages − Convert special characters (< > &) to (< > &). Security Information Security information regarding Fujitsu products is announced in the following url. http://software.fujitsu.com/en/security/main.
Chapter 3: Notes on Interstage Operation Monitor Screen Colors For the machine on which Interstage Application Server is installed, use a display monitor and driver for which 256 colors or more can be specified as monitor screen colors. If a value of less than 256 colors is set, the GUI program using Java cannot start. This type of display monitor cannot be used.
Common Notes for Interstage Setting Port Numbers Used for Individual Services When port numbers are set or changed for Interstage Application Server services, unique port numbers must be set for all individual services including applications in the system. If services are operated with the same port number set for different services, normal operation cannot be performed (for example, a client may fail to access a service).
Chapter 3: Notes on Interstage Operation Service Name/ Function Name Port Number Setting Location CORBA Service "Port number for CORBA service" Interstage Management Console - [System] > [Update System Settings] > [CORBA Service Settings [Show]] > [Port number] Or The environment definition file (config) - IIOP_port "Port number for CORBA service SSL" Interstage Management Console - [System] > [Update System Settings] > [CORBA Service Settings [Show]] > [SSL Encryption] > [SSL listen port] Or The enviro
Common Notes for Interstage Service Name/ Function Name Port Number Setting Location Servlet Service for Interstage operation control "Port number for Interstage operation control Servlet service" JServlet environment definition file - [containername].
Chapter 3: Notes on Interstage Operation Service Name/ Function Name Port Number Setting Location Infodirectory Directory Service “DSA LDAP port number” [When DSA is created] [Management tool client] > [InfoDirectory Server Management] > [ Create DSA ] > [Configure Processes] > [Active process] > "Select LDAP process (mtldapd)" > [Property] > [LDAP Configuration] > [Port No] [After DSA is created] [Management tool client] > [InfoDirectory Server Management] > [Configure Processes] > "Select LDAP process
Notes on the Interstage Operation Tool Notes on the Interstage Operation Tool The Interstage Operation Tool can be used with the following products: • Interstage Application Server Enterprise Edition • Interstage Application Server Standard Edition • Interstage Application Server Plus Version Level of Each Service Performing the Operation The version level of each service operating with Interstage Operation Tool is limited to the service installed with the same CD-ROM.
Chapter 3: Notes on Interstage Operation Notes on the Interstage Integration Commands This section provides additional information on the Interstage integration commands.
Notes on the InfoProvider Pro Notes on the InfoProvider Pro This section provides notes on the InfoProvider Pro. (1) Authority to Use the Web Server Web server install/uninstall and Web Server start/stop operations can be used only by Administrators or users with Administrator authority. (2) SQL Gateway Articles about the SQL gateway have been deleted from V4.0. This function can still be used in the current version. Those who use the SQL gateway of V3.
Chapter 3: Notes on Interstage Operation Notes on the Interstage HTTP Server This section provides notes on the Interstage HTTP Server. Authority to Use the Interstage HTTP Server Interstage HTTP Server install/uninstall and Interstage HTTP Server start/stop operations can be used only by Administrators or users with Administrator authority. Notes on Operating Interstage HTTP Server Do not delete the following process management files while operating Interstage HTTP Server. /opt/FJSVihs/logs/httpd.
Notes on J2EE Notes on J2EE 1) J2EE Application Operation To use the following XML files while the web application or the J2EE application client is operating, add the Java VM heap area, which is calculated from the formula shown below, to the specified value for the maximum Java VM heap area size. • • Target XML files during operating web application − Web application environment definition file (web.xml) − Name conversion file (FJWebebeProperties.xml).
Chapter 3: Notes on Interstage Operation Event resulting when the Java VM heap memory becomes insufficient When an application is operated, if the Java VM heap area size to be used is not added to the maximum size, the following event may occur: javax.naming.NamingException:com.fujitsu.interstage.j2ee.def.FJDefException: unknown error: java.lang.
Notes on the Servlet Service Notes on the Servlet Service 1) Servlet Service Execution Environment The Servlet Service execution environment is based on Tomcat4.1.2. A Servlet or JSP application that runs on Tomcat4.1 or later may not function correctly. 2) Execution Environment of Earlier Version Servlet Service An earlier version Servlet Service (servlet execution environment based on tomcat3.1) is not compatible with the Microsoft Internet Information Server of Windows 2003 Server.
Chapter 3: Notes on Interstage Operation Notes on Using the EJB Service This section provides information on using the EJB Service. Version of Java Development Kit/Java Runtime Environment 1) 2) The same version of Java Development Kit (JDK)/Java Runtime Environment (JRE) is recommended from development to execution. The application class created by the Java Development Kit 1.1.x javac command is not always executable in Java Development Kit/Java Runtime Environment 1.2 and 1.3 execution environment.
Notes on Using the EJB Service 4) The startup performance of the rapid invocation definition screen of the customize tool that is started by ejbcustx is improved (V5.0). Because the processing to acquire information on Enterprise Bean installed when it is listed is accelerated, if Enterprise Bean of the EJB1.1 and EJB2.0 specification as well as Enterprise Bean of the EJB1.0 specification are installed in the invoking Bean, they are also listed. If Enterprise Bean of the EJB1.
Chapter 3: Notes on Interstage Operation 3) 4) The startup performance of the rapid invocation definition screen of the customize tool that is started by ejbcustx is improved (V5.0). Because the processing to acquire information on Enterprise Bean installed when it is listed is accelerated, if Enterprise Bean of the EJB1.1 and EJB2.0 specification as well as Enterprise Bean of the EJB1.0 specification are installed in the invoking Bean, they are also listed. If Enterprise Bean of the EJB1.
Notes on Using the EJB Service When Interstage JDBC Driver is Used 1) Data Type The support range of the data type is as follows.
Chapter 3: Notes on Interstage Operation 3) Stored Procedure A stored procedure cannot be used. 4) API when datetime Type is Used When the following API is used for the datetime type, only the values within the smalltime type are valid. • PreparedStatement.setTimestamp(int parameterIndex, Timestamp x) 5) Unsupported API Among the JDBC API standard specifications, the following APIs are not supported.
Notes on Using the EJB Service • • • − setLong(int parameterIndex, long x) − execute() − setObject(int parameterIndex, Object x) − setObject(int parameterIndex, Object x, int targetSqlType) − setObject(int parameterIndex, Object x, int targetSqlType, int scale) − setBigDecimal(int parameterIndex, BigDecimal x) When column data type is round number type(real type, float type) − setTimestamp(int parameterIndex, Timestamp x) When column data type is character string type(char type, varchar typ
Chapter 3: Notes on Interstage Operation 6) Fetching a Line from a Text Type and a Table Containing an Image Type With regard to fetching a line from a text type and a table containing an image type; in BMP, specify the row of the text type and the image type such that they are placed last in the selected list. − Example 1: Specify the line of the text type and the image type so that they are placed in the COL3. SELECT COL1, COL2, COL3 FROM SCM.
Notes on SOAP Service Notes on SOAP Service When Encryption Communication by SSL is Used • It is necessary to construct the SSL environment for the SOAP server and the SSL environment for the SOAP client with the system environment that the SOAP Service operates. • It is necessary to construct the SSL communication environment respectively of SOAP communication between the IIOP communication with the CORBA client application and the SOAP server application in the CORBA/SOAP client gateway.
Chapter 3: Notes on Interstage Operation Notes on the CORBA Service This section provides additional information on the CORBA Service. Notes on Installation and Environment Settings 1) When the CORBA Service is installed and linked to the Systemwalker/CentricMGR operation management tool, particular care is needed when stopping the CORBA Service and when setting up the environment uninstalling.
Notes on the CORBA Service Notes about Setting Applications 1) When specifying environment variables in env when registering the implementation repository, do not specify multiple character strings delimited by semicolons (;). The system recognizes semicolons as delimiters between different environment variables.
Chapter 3: Notes on Interstage Operation Notes on the IDL Compiler The IDL Compiler can be used with the following products: • Interstage Application Server Enterprise Edition • Interstage Application Server Standard Edition • Interstage Application Server Plus 1) If the IDL compiler is used in a client, install CORBA Service Client and CORBA Service Development Tool. 2) The IDL file suffix, "idl" must be in lower-case letters.
Notes on the Event Service Notes on the Event Service The Event Service can be used with the following products: • Interstage Application Server Enterprise Edition • Interstage Application Server Standard Edition • Interstage Application Server Plus The following notes relate to the operation of the Event Service.
Chapter 3: Notes on Interstage Operation Note on Persistent Channel Applications Persistent channel applications can be used with the following products: • Interstage Application Server Enterprise Edition • Interstage Application Server Standard Edition If the connection is forcibly disconnected due to a system failure, applications of the persistent channel must be restarted.
Notes on the Component Transaction Service Notes on the Component Transaction Service The Component Transaction Service can be used with the following products: • Interstage Application Server Enterprise Edition • Interstage Application Server Standard Edition • Interstage Application Server Plus This section provides additional information on the Component Transaction Service.
Chapter 3: Notes on Interstage Operation Notes on the Database Linkage Service Notes on OTS Command Execution If an OTS command is executed in an environment in which the CORBA Service has not been installed, an application error dialog box may be displayed. In this case, install and start the CORBA Service and re-execute the otssetrsc command. Notes on the Use of Oracle Use of Oracle Database by Java Server Application Use Oracle 8.0.5 or later.
Notes on the Database Linkage Service Notes on Development using Functions for the Java Language Provided by the Database Linkage Service of Interstage 1.1 or Earlier Use environment under Database Linkage Service installation directory/pc/lib/J11. Maximum Number of Resources for One Transaction The maximum number of resources that can be used in a transaction using the isinit command is four. This value cannot be changed. Sample Provided with Database Linkage Service Use Pro*COBOL1.8.
Chapter 3: Notes on Interstage Operation Notes on InfoDirectory This section provides additional information on InfoDirectory. Setup Item Related to the Maximum Simultaneous Number of Clients Connected The following setting of InfoDirectory is needed when InfoDirectory is used by the security function of the Component Transaction Service and the online reference function of the WWW server. The exact setting is also dependent on the maximum simultaneous connection number of clients.
Notes on JDK/JRE Notes on JDK/JRE Notes on Java VM The default JavaVM when using JDK/JRE1.3.1_06 and 1.4.1_01 in Interstage Java Server Package is Fujitsu JavaVM (FJVM). This default is synonymous with specifying "-fjvm" in the java command option. Notes on OutOfMemoryError Caused by a Permanent Area Shortage The Permanent area is one of heap areas used to manage objects (Java classes and methods) that are permanently referenced by HostSpotVM (including FJVM), which is a JavaVM introduced to JDK/JRE 1.
Chapter 3: Notes on Interstage Operation Notes on the Return Value of java.beans.PropertyDescriptor.getWriteMethod() JDK/JRE 1.3.1_08 and 1.4.0_01 solved the problem "bean methods may not be obtained," which caused by a problem in java.beans.Introspector.getBeanInfor(). The operation of the java.beans.Introspector that may have produced different results on different JavaVMs (because the order in which methods should return was not defined in the JavaBeans specifications) has been corrected.
Notes on Portal Component Notes on Portal Component Notes on Contents Use A homepage (Web page) or the individual contents (text, images, music, etc.) on the homepage are copyrighted. Therefore, using these copyrighted materials may infringe the copyright. It is recommended that the permission of the copyright owner is obtained before using the homepage or its contents. Notes at Logon When logging on to Portal component, IDs/passwords of common users are sent without being encoded.
Chapter 3: Notes on Interstage Operation Windows NT® 2000: Start | Programs | Command prompt (4) Execute the following program: \portalworks\bin\pwinetop.exe -d|-w When this system is installed to "C:\Interstage\portalworks" on a machine belonging to the domain. C:\Interstage\portalworks\bin\pwinetop.exe -d When the system is installed to "C:\Interstage\portalworks" on a machine (work group machine) that does not belong to the domain. C:\Interstage\portalworks\bin\pwinetop.
Notes on Portal Component Notes on USP Use Notes on Web USP Use 1) Processing when "Network Error:503" Occurs If "Network Error : 503" is displayed when a Web page was added as a private client, check that the following are specified correctly: • URL description • [Bypass the proxy server for addresses beginning with] setting at Proxy server specification If "Network error : 503" is generated even when the above processing is performed, the Web server may have stopped.
Chapter 3: Notes on Interstage Operation (4) Start the [PortalServer] WorkUnit. (5) Start Portal component operation management and check the password change. Modification Method (1) Stop the [PortalServer] WorkUnit. (2) Move to "/opt/FJSVispw/bin/" (3) Input "pwadminpasschg.sh {new password}". "{" and "}" are unnecessary. Example: "pwadminpasschg.sh pwadmin_password" (4) Start the [PortalServer] WorkUnit. (5) Start Porta component operation management and check the password change.
Notes on Portal Component Notes on Using Administrative Console • In the setting example of definition in the server that is displayed on the scenario registration window or the USP addition window, Windows NT® server is used. Example: file:/temp/scenario/scenario.jar Make the actual settings in accordance with the syntax for the Solaris™ Operating Environment system.
Chapter 3: Notes on Interstage Operation Notes on Framework Security on the Internet When using applications that use framework on the Internet, design them considering the security of application development. Security may also be necessary depending on the firewall or other infrastructure products. Redistributable Files The following files can be redistributed. These files can be distributed to the client environment and used. C:\Interstage\APC\redist\applet\ujiapplet.
Index access from PC to secure site restrictions, 2-28 cross-site scripting problem notes, 3-2 administrative console notes, 3-39 Database Linkage Service Interstage operation, 3-30 provided sample, 3-31 restrictions, 2-22 alternative logon function restrictions, 2-26 application development required software, 1-2 application execution required software, 1-7 Authority to Use the Web Server, 3-11 Brick Automatic Update Function restrictions, 2-28 C and C++ programming restrictions, 2-17 class names note
Product Notes - Index error messages, 3-32 Interstage operation, 3-32 restrictions, 2-23 setup items, 3-32 notes, 3-33 restrictions, 2-24 JNDI restrictions, 2-23 InfoDirectory Administration Tool restrictions, 2-23 JSSE function notes on use, 3-3 InfoProvider Pro notes, 3-11 restrictions, 2-3 keep-alive specification notes, 3-38 internet security, 3-40 load distribution environment restrictions, 2-27 Interstage HTTP Server notes, 3-12 restrictions, 2-2 locale of languages restrictions, 2-22 Inter
Product Notes - Index InfoProvider Pro, 3-11 installation and environment settings, 3-24 internet security, 3-40 Interstage HTTP Server, 3-12 Interstage integration commands, 3-10 Interstage Operation Tool, 3-9 J2EE, 3-13 Java environment, 3-26 JDK/JRE, 3-33 JSSE function, 3-3 keep-alive specification, 3-38 maximum no.
Product Notes - Index session recovery function, 3-23 starting and stopping services, 3-10 setting the heap size in the java execution environment, 3-39 starting EJB applications, 3-22 setup item related to maximum simultaneous no.