User's Manual

12
□ Main unit operation (Device Management Tool)
Operation items Overview
Device / Gateway / Remote Monitoring Station List
Display the list of Device / Gateway / Remote Monitoring
Station.
Checking Contents of
Device / Gateway / Remote Monitoring
Station
On clicking a device ID or a gateway ID or a station ID in the
"Device/Gateway/Remote Monitoring Station List," you can check
the data contents that are set for that ID.
(For single device / Gateway)
Batch Editing Devices / Gateways / Remote Monitoring Stations
Edit the value of set item of Device / Gateway / Remote
Monitoring Station at once.
(For multiple devices / Gateways)
Command History
Display the history of control command of
Device / Gateway /
Remote Monitoring Station.
(Display for each request number)
Detailed Information of Control Commands
Display the detailed information of control commands to the
Device / Gateway / Remote Monitoring Station.
(Display the result of
the process, etc. to each Device / Gateway
/ Remote Monitoring Station)
List of uploaded log files
Display the list of uploaded log
files from the Device / Gateway
/ Remote Monitoring Station.
IoT Platform Setting Set the connection information to the platform.
Command Create New
■Getting Log
■Firmware Update
■Camera Shooting
■Mode Change
■Sound Data Download
■Sound Data Playback
■Alarm Release
■Remote Monitoring Station Reset
■Certificate Download
The following can be directed.
* The Device in this item refers to Vital Sensing Unit.
* The more information of this tool can be found in the (Sensor Algorithm User's Guide (for Main Module)（Device and Gate Way
Setting）).
□ Setting method when function is not used
Function Operation
All call functions(Incoming and
outgoing)
Do not configure the telephone number after configuring the setting when the C
onsulting
Call button is pressed and the setting when the Emergency Call Button is pressed to "call."
Call function by Consulting Call
Button
Do not configure the consulting report contact telephone number after configuring the
setting when the Consulting Call Button is pressed to "call."
Call function by Emergency Call
Button
Do not configure the emergency report contact telephone number after configuring the
setting when the Emergency Call Button pressed to "call."
Temperature and humidity
measurement
Turn off the thermo-hygro sensor ON/OFF.
Trespassing prevention
Turn off the Trespassing prevention mode OM/FF and the Trespassing prevention mode
with
the date and hour designation.
Safety confirmation Turn safety confirmation OFF in the sensor algorithm settings.
Out-of-range notification Turn out detection mode OFF.
Camera shooting
There is no setting to turn the function OFF.
To prevent the camera from taking photos, the administrator should not issue a shooting
instruction, or the trespassing prevention mode should be turned OFF. If the trespassing
prevention mode is ON it will automatically take photos.
To completely disable
the camera shooting function, use a Remote Monitoring Station (No
Camera).