User's Manual

ManualsBrandsFujitsu ManualsElectronicsRemote Monitoring Station

■

In this manual, various pictures are used to indicate alarm. These are signs to prevent

harms and

meaning are as

The following sign is used to show what one the content of harm and damage is.

The

Bluetooth

such marks by FUJITSU LIMITED is under license.

Google, Google logo, Google Play and Android

UBIQUITOUSWARE is a

All other trademarks specified here are

the property of their respective owners.

Please contact the source this product was obtained from

if you have any questions about using this product or if

■

This product’s functions and use may vary depending on how it was configured by the

source it was obtained

us).

Please ask for an explanation of this product’s functions and use when you receive

the product, or contact the source the product was obtained from for help.

This product is not meant to p

accidents, or damage caused through use of this product.

This product is not meant for specialized monitoring such as childcare, caregiving, or medical purposes.

We are not to be hel

for these applications.

■

Prior to using this product, confirm that the following items are included in the package. If anything is

please contact the source the product was obtained from. In addition to the included items listed on this sheet,

the package may also contain a sheet of instructions. Place

in safekeeping.

In addition, the attached articles of the stand for

■

□

Remote Monitoring Station

Alarm Indication

In this manual, various pictures are used to indicate alarm. These are signs to prevent

harms and

damages that

meaning are as

follows.

DANGER

WARNING

CAUTION

The following sign is used to show what one the content of harm and damage is.

The sign shown by

content of warning is shown in the sign and sideward of that.

The sign shown by

A concrete content of the prohibition is shown in the sign and sideward

of that.

The sign shown by

instruction is shown in the sign and sideward of that.

Bluetooth

word

mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by FUJITSU LIMITED is under license.

Google, Google logo, Google Play and Android

UBIQUITOUSWARE is a

All other trademarks specified here are

the property of their respective owners.

Please contact the source this product was obtained from

if you have any questions about using this product or if

you

To users of this product

This product’s functions and use may vary depending on how it was configured by the

source it was obtained

us).

Please ask for an explanation of this product’s functions and use when you receive

the product, or contact the source the product was obtained from for help.

This product is not meant to p

accidents, or damage caused through use of this product.

This product is not meant for specialized monitoring such as childcare, caregiving, or medical purposes.

We are not to be hel

for these applications.

Confirm included items prior to use

Prior to using this product, confirm that the following items are included in the package. If anything is

please contact the source the product was obtained from. In addition to the included items listed on this sheet,

the package may also contain a sheet of instructions. Place

in safekeeping.

○

Remote Monitoring Station(main unit)

○

AC Adapter

○

Warranty Card

In addition, the attached articles of the stand for

○

Stand

■

Ports and controls

Front

Rear

Bottom

Screw hole

Consulting

Call Cancel Button

Pyroelectric sensor

Thermohygrometer sensor

BLE Pairing Button

WLAN Connect Button

Cable guide

Remote Monitoring Station

Precautions for use

Alarm Indication

In this manual, various pictures are used to indicate alarm. These are signs to prevent

damages that

might be added to you and other people. The display and the

follows.

DANGER

When this display is disregarded and wrong handling is done,

there is a high possibility that the person dies or sustains

severe injuries.

WARNING

When this

there is a possibility that the person dies or sustains severe

injuries.

CAUTION

When this display is disregarded and wrong handling is done,

there is a possibility that the person owes injury or the

property damage occurs.

The following sign is used to show what one the content of harm and damage is.

The sign shown by

content of warning is shown in the sign and sideward of that.

The sign shown by

A concrete content of the prohibition is shown in the sign and sideward

of that.

The sign shown by

instruction is shown in the sign and sideward of that.

mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by FUJITSU LIMITED is under license.

Google, Google logo, Google Play and Android

trademark of FUJITSU LIMITED.

All other trademarks specified here are

the property of their respective owners.

To users of this product

Please contact the source this product was obtained from

if you have any questions about using this product or if

you

need help resolving any concerns.

More Information can be found on the Internet at:

http://www.fmworld.net/biz/uware/support/

To users of this product

This product’s functions and use may vary depending on how it was configured by the

source it was obtained

from (the business customer that purchased the product from

Please ask for an explanation of this product’s functions and use when you receive

the product, or contact the source the product was obtained from for help.

This product is not meant to p

accidents, or damage caused through use of this product.

This product is not meant for specialized monitoring such as childcare, caregiving, or medical purposes.

We are not to be hel

d responsible for incidents, accidents, or damage caused through use of this product

for these applications.

Confirm included items prior to use

Prior to using this product, confirm that the following items are included in the package. If anything is

please contact the source the product was obtained from. In addition to the included items listed on this sheet,

the package may also contain a sheet of instructions. Place

Remote Monitoring Station(main unit)

AC Adapter

Warranty Card

Confirm that all product serial numbers are entered on the warranty card.

In addition, the attached articles of the stand for

Stand

○Screw

○

Ports and controls

Screw hole

Consulting

Call Button

Camera LED

Call Cancel Button

Pyroelectric sensor

Thermohygrometer sensor

Mic

BLE Pairing Button

WLAN Connect Button

Cable guide

Remote Monitoring Station

Precautions for use

Alarm Indication

In this manual, various pictures are used to indicate alarm. These are signs to prevent

might be added to you and other people. The display and the

When this display is disregarded and wrong handling is done,

there is a high possibility that the person dies or sustains

severe injuries.

When this

display is disregarded and wrong handling is done,

there is a possibility that the person dies or sustains severe

injuries.

When this display is disregarded and wrong handling is done,

there is a possibility that the person owes injury or the

property damage occurs.

The following sign is used to show what one the content of harm and damage is.

The sign shown by

△

means prompts warning and attention. A concrete

content of warning is shown in the sign and sideward of that.

The sign shown by

means an act of not doing (prohibited activity).

A concrete content of the prohibition is shown in the sign and sideward

The sign shown by

●

means what you must do. A concrete content of the

instruction is shown in the sign and sideward of that.

mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by FUJITSU LIMITED is under license.

Google, Google logo, Google Play and Android

is a trademark of Google Inc. or a registered trademark.

trademark of FUJITSU LIMITED.

All other trademarks specified here are

the property of their respective owners.

To users of this product

Please contact the source this product was obtained from

if you have any questions about using this product or if

need help resolving any concerns.

More Information can be found on the Internet at:

http://www.fmworld.net/biz/uware/support/

To users of this product

This product’s functions and use may vary depending on how it was configured by the

from (the business customer that purchased the product from

Please ask for an explanation of this product’s functions and use when you receive

the product, or contact the source the product was obtained from for help.

This product is not meant to p

revent entry or theft. We are not to be held responsible for incidents,

accidents, or damage caused through use of this product.

This product is not meant for specialized monitoring such as childcare, caregiving, or medical purposes.

d responsible for incidents, accidents, or damage caused through use of this product

Confirm included items prior to use

Prior to using this product, confirm that the following items are included in the package. If anything is

please contact the source the product was obtained from. In addition to the included items listed on this sheet,

the package may also contain a sheet of instructions. Place

Remote Monitoring Station(main unit)

Confirm that all product serial numbers are entered on the warranty card.

In addition, the attached articles of the stand for

○

Double-sided

Ports and controls

–

main unit

Remote Monitoring Station

Precautions for use

In this manual, various pictures are used to indicate alarm. These are signs to prevent

might be added to you and other people. The display and the

When this display is disregarded and wrong handling is done,

there is a high possibility that the person dies or sustains

severe injuries.

display is disregarded and wrong handling is done,

there is a possibility that the person dies or sustains severe

When this display is disregarded and wrong handling is done,

there is a possibility that the person owes injury or the

property damage occurs.

The following sign is used to show what one the content of harm and damage is.

means prompts warning and attention. A concrete

content of warning is shown in the sign and sideward of that.

means an act of not doing (prohibited activity).

A concrete content of the prohibition is shown in the sign and sideward

means what you must do. A concrete content of the

instruction is shown in the sign and sideward of that.

mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of

is a trademark of Google Inc. or a registered trademark.

trademark of FUJITSU LIMITED.

To users of this product

Please contact the source this product was obtained from

if you have any questions about using this product or if

need help resolving any concerns.

More Information can be found on the Internet at:

http://www.fmworld.net/biz/uware/support/

To users of this product

This product’s functions and use may vary depending on how it was configured by the

from (the business customer that purchased the product from

Please ask for an explanation of this product’s functions and use when you receive

the product, or contact the source the product was obtained from for help.

revent entry or theft. We are not to be held responsible for incidents,

accidents, or damage caused through use of this product.

This product is not meant for specialized monitoring such as childcare, caregiving, or medical purposes.

d responsible for incidents, accidents, or damage caused through use of this product

Confirm included items prior to use

Prior to using this product, confirm that the following items are included in the package. If anything is

please contact the source the product was obtained from. In addition to the included items listed on this sheet,

the package may also contain a sheet of instructions. Place

the included items along with the sheet of instructions

Remote Monitoring Station(main unit)

○

Precautions to use (this sheet)

○

Power cable

Confirm that all product serial numbers are entered on the warranty card.

In addition, the attached articles of the stand for

tape x2

○

main unit

Remote Monitoring Station

Precautions for use

In this manual, various pictures are used to indicate alarm. These are signs to prevent

might be added to you and other people. The display and the

When this display is disregarded and wrong handling is done,

there is a high possibility that the person dies or sustains

display is disregarded and wrong handling is done,

there is a possibility that the person dies or sustains severe

When this display is disregarded and wrong handling is done,

there is a possibility that the person owes injury or the

The following sign is used to show what one the content of harm and damage is.

means prompts warning and attention. A concrete

content of warning is shown in the sign and sideward of that.

means an act of not doing (prohibited activity).

A concrete content of the prohibition is shown in the sign and sideward

means what you must do. A concrete content of the

instruction is shown in the sign and sideward of that.

mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of

is a trademark of Google Inc. or a registered trademark.

To users of this product

Please contact the source this product was obtained from

if you have any questions about using this product or if

need help resolving any concerns.

More Information can be found on the Internet at:

http://www.fmworld.net/biz/uware/support/

This product’s functions and use may vary depending on how it was configured by the

from (the business customer that purchased the product from

Please ask for an explanation of this product’s functions and use when you receive

the product, or contact the source the product was obtained from for help.

revent entry or theft. We are not to be held responsible for incidents,

This product is not meant for specialized monitoring such as childcare, caregiving, or medical purposes.

d responsible for incidents, accidents, or damage caused through use of this product

Confirm included items prior to use

Prior to using this product, confirm that the following items are included in the package. If anything is

please contact the source the product was obtained from. In addition to the included items listed on this sheet,

the included items along with the sheet of instructions

Precautions to use (this sheet)

Power cable

Confirm that all product serial numbers are entered on the warranty card.

In addition, the attached articles of the stand for

RCB sold separately are as follows.

○

Adsorption tape x2

main unit

Note: only the model mounted camera

Remote Monitoring Station

Precautions for use

In this manual, various pictures are used to indicate alarm. These are signs to prevent

might be added to you and other people. The display and the

When this display is disregarded and wrong handling is done,

there is a high possibility that the person dies or sustains

display is disregarded and wrong handling is done,

there is a possibility that the person dies or sustains severe

When this display is disregarded and wrong handling is done,

there is a possibility that the person owes injury or the

The following sign is used to show what one the content of harm and damage is.

means prompts warning and attention. A concrete

content of warning is shown in the sign and sideward of that.

means an act of not doing (prohibited activity).

A concrete content of the prohibition is shown in the sign and sideward

means what you must do. A concrete content of the

instruction is shown in the sign and sideward of that.

mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of

is a trademark of Google Inc. or a registered trademark.

To users of this product

Please contact the source this product was obtained from

if you have any questions about using this product or if

need help resolving any concerns.

More Information can be found on the Internet at:

http://www.fmworld.net/biz/uware/support/

This product’s functions and use may vary depending on how it was configured by the

from (the business customer that purchased the product from

Please ask for an explanation of this product’s functions and use when you receive

the product, or contact the source the product was obtained from for help.

revent entry or theft. We are not to be held responsible for incidents,

This product is not meant for specialized monitoring such as childcare, caregiving, or medical purposes.

d responsible for incidents, accidents, or damage caused through use of this product

Prior to using this product, confirm that the following items are included in the package. If anything is

please contact the source the product was obtained from. In addition to the included items listed on this sheet,

the included items along with the sheet of instructions

Precautions to use (this sheet)

Confirm that all product serial numbers are entered on the warranty card.

RCB sold separately are as follows.

Adsorption tape x2

Screw hole for the

Emergency C

all Button

Power LED

Camera [Note]

Speaker

Status LED

Mic

BLE Pairing LED

Volume Button

Power Connector

Note: only the model mounted camera

WLAN Connect LED

In this manual, various pictures are used to indicate alarm. These are signs to prevent

might be added to you and other people. The display and the

When this display is disregarded and wrong handling is done,

there is a high possibility that the person dies or sustains

display is disregarded and wrong handling is done,

there is a possibility that the person dies or sustains severe

When this display is disregarded and wrong handling is done,

there is a possibility that the person owes injury or the

The following sign is used to show what one the content of harm and damage is.

means prompts warning and attention. A concrete

content of warning is shown in the sign and sideward of that.

means an act of not doing (prohibited activity).

A concrete content of the prohibition is shown in the sign and sideward

means what you must do. A concrete content of the

mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of

is a trademark of Google Inc. or a registered trademark.

Please contact the source this product was obtained from

if you have any questions about using this product or if

This product’s functions and use may vary depending on how it was configured by the

from (the business customer that purchased the product from

Please ask for an explanation of this product’s functions and use when you receive

the product, or contact the source the product was obtained from for help.

revent entry or theft. We are not to be held responsible for incidents,

This product is not meant for specialized monitoring such as childcare, caregiving, or medical purposes.

d responsible for incidents, accidents, or damage caused through use of this product

Prior to using this product, confirm that the following items are included in the package. If anything is

missing,

please contact the source the product was obtained from. In addition to the included items listed on this sheet,

the included items along with the sheet of instructions

Precautions to use (this sheet)

Confirm that all product serial numbers are entered on the warranty card.

RCB sold separately are as follows.

Screw hole for the

stand

all Button

Camera [Note]

BLE Pairing LED

Volume Button

Power Connector

Note: only the model mounted camera

WLAN Connect LED

In this manual, various pictures are used to indicate alarm. These are signs to prevent

might be added to you and other people. The display and the

High Safety Required Use

This Product is designed, developed and manufactured as contemplated for general use,

general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and

manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is se

could lead directly to death, personal injury, severe physical damage or other loss (hereinafter “High Safety Required

Use”), including without limitation, nuclear reaction control in nuclear facility, aircraft flight control, air traffic

control, h

not use this Product without securing the sufficient safety

About

・

Wireless devices that use the 2.4 GHz band (as indicated above) make use of the entire bandwidth

and are unable to avoid using the bandwidth used by mobile identification equipment. FHSS is used

as the modulation method, and such devices may interfere with

・

In addition to commercial, scientific, and medical devices (such as microwaves), on

and designated low

other locations are also operated within the frequency band used by this product.

（

・

It is recommended that this product be used within a 10 m radius (the line

communicate with (the maximum

communication distance may vary depending on the usage environment, such as the structure/material of the building it

is being used in, obstacles, software, installation

where communication slows down or even becomes impossible.

・

If you will be using this product on an airplane, first contact the relevant airline company to confirm.

・

We are not to be held

communication.

Wireless LAN (WLAN)

・

The product uses the 2.4 GHz band. DS

interference distance is

All bandwidths can be used, and that bands of mobile unit identification devices can be avoided.

（

・

It is recommended that this product be used within a 25 m radius (unobstructed) from devices it will communicate with.

However, due to the nature of wireless LAN technology, the communication

environment, such as the structure/material of the building it is being used in, obstacles, software, installation

conditions, and radio wave conditions.

・

There may also be situations where communication slows down

・

In mixed IEEE 802.11g and IEEE 802.11b wireless LAN environments, IEEE 802.11g functions may not be available in order

to maintain compatibility with IEEE 802.11b standards. If IEEE 802.11g functions are required, keep IEEE 802

IEEE 802.11b networks separate, and leave at least five channels

This product’s functions and use may vary depending on how it was configured by the

from (the business customer that purchased the product from

Please ask for an explanation of this product’s functions and use when you receive

revent entry or theft. We are not to be held responsible for incidents,

This product is not meant for specialized monitoring such as childcare, caregiving, or medical purposes.

d responsible for incidents, accidents, or damage caused through use of this product

missing,

please contact the source the product was obtained from. In addition to the included items listed on this sheet,

the included items along with the sheet of instructions

■

□

Power ON

□

Power OFF

Remove the power

■

If you were provided with any installation instructions from the provider of this product, be sure

to follow them.

Install the Remote Monitoring Station according to

in. We recommend using the separately sold stand or wall attachment options to install

the R

emote

1/4th inch screws) can be installed using the screw

unit.

This section explains how to install the stand (sold separately).

For information on how to install the wall attachment, please refer to the manual

supplied with the wall attachment.

stand

Cut side

High Safety Required Use

This Product is designed, developed and manufactured as contemplated for general use,

general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and

manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is se

could lead directly to death, personal injury, severe physical damage or other loss (hereinafter “High Safety Required

Use”), including without limitation, nuclear reaction control in nuclear facility, aircraft flight control, air traffic

control, h

eavy transport logistics, medical life support system, missile launch control in weapon system. You shall

not use this Product without securing the sufficient safety

About

Bluetooth

Wireless devices that use the 2.4 GHz band (as indicated above) make use of the entire bandwidth

and are unable to avoid using the bandwidth used by mobile identification equipment. FHSS is used

as the modulation method, and such devices may interfere with

In addition to commercial, scientific, and medical devices (such as microwaves), on

and designated low

power radio stations (nonlicensed) for mobile identification used in factory produc

other locations are also operated within the frequency band used by this product.

）

Prior to using this product, confirm that there are no on

stations for mobile identification use being operated nearby.

）

If the use of this product causes radio interference with an on

identification, immediately stop the produc

below) to discuss ways to prevent interference (such as putting up partitions).

）

If the use of this product causes radio interference with a designated low

identification or if you have any other concerns, please contact the source this product was obtained from.

It is recommended that this product be used within a 10 m radius (the line

communicate with (the maximum

communication distance may vary depending on the usage environment, such as the structure/material of the building it

is being used in, obstacles, software, installation

where communication slows down or even becomes impossible.

If you will be using this product on an airplane, first contact the relevant airline company to confirm.

We are not to be held

communication.

Wireless LAN (WLAN)

The product uses the 2.4 GHz band. DS

interference distance is

All bandwidths can be used, and that bands of mobile unit identification devices can be avoided.

）

In the frequency band used by WLAN devices, in addition to home electric appliances such as a microwave oven

and industrial/scientific/m

in production lines of a factory, etc., specified low power radio

in operation.

）

Before using this device, confirm that in

low power radio stations or amateur radio stations are not in operation in your neighborhood

）

If this device generates harmful radio wave interference against in

of mobile objects, change the using frequency promptly or stop using wireless LAN function.

）

If the use of this product causes radio interference with a designated low

identification or if you have any othe

It is recommended that this product be used within a 25 m radius (unobstructed) from devices it will communicate with.

However, due to the nature of wireless LAN technology, the communication

environment, such as the structure/material of the building it is being used in, obstacles, software, installation

conditions, and radio wave conditions.

There may also be situations where communication slows down

In mixed IEEE 802.11g and IEEE 802.11b wireless LAN environments, IEEE 802.11g functions may not be available in order

to maintain compatibility with IEEE 802.11b standards. If IEEE 802.11g functions are required, keep IEEE 802

IEEE 802.11b networks separate, and leave at least five channels

Power ON/OFF

Power ON

Connect the

and connects the power supply plug of the AC adapter to an

outlet.

Then power of R

power LED turns on green

Power OFF

Remove the power

Installation of Remote Monitoring Station

If you were provided with any installation instructions from the provider of this product, be sure

to follow them.

Install the Remote Monitoring Station according to

in. We recommend using the separately sold stand or wall attachment options to install

emote

onitoring

1/4th inch screws) can be installed using the screw

unit.

This section explains how to install the stand (sold separately).

For information on how to install the wall attachment, please refer to the manual

supplied with the wall attachment.

Set the power cable in the cable gu

Cable sticking out from bottom

Peel the paper from the

then stick the tape to the bottom surface of the stand.

Install the stand to the Remote Monitoring Station.

Use a

coin to tighten and loosen the screw.

Note 1: The thick tape is

is D

ouble

Note 2: Clean any dirt or dust from the bottom surface

of the stand prior to attaching the tape.

Cut side

High Safety Required Use

This Product is designed, developed and manufactured as contemplated for general use,

general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and

manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is se

could lead directly to death, personal injury, severe physical damage or other loss (hereinafter “High Safety Required

Use”), including without limitation, nuclear reaction control in nuclear facility, aircraft flight control, air traffic

eavy transport logistics, medical life support system, missile launch control in weapon system. You shall

not use this Product without securing the sufficient safety

wireless technology

Wireless devices that use the 2.4 GHz band (as indicated above) make use of the entire bandwidth

and are unable to avoid using the bandwidth used by mobile identification equipment. FHSS is used

as the modulation method, and such devices may interfere with

In addition to commercial, scientific, and medical devices (such as microwaves), on

power radio stations (nonlicensed) for mobile identification used in factory produc

other locations are also operated within the frequency band used by this product.

Prior to using this product, confirm that there are no on

stations for mobile identification use being operated nearby.

If the use of this product causes radio interference with an on

identification, immediately stop the produc

below) to discuss ways to prevent interference (such as putting up partitions).

If the use of this product causes radio interference with a designated low

identification or if you have any other concerns, please contact the source this product was obtained from.

It is recommended that this product be used within a 10 m radius (the line

communicate with (the maximum

output for Class 2). However, due to the nature of Bluetooth® wireless technology, the

communication distance may vary depending on the usage environment, such as the structure/material of the building it

is being used in, obstacles, software, installation

where communication slows down or even becomes impossible.

If you will be using this product on an airplane, first contact the relevant airline company to confirm.

responsible for any data transmitted nor information leaked during Bluetooth® wireless technology

Wireless LAN (WLAN)

The product uses the 2.4 GHz band. DS

interference distance is

about 40 m or less.

All bandwidths can be used, and that bands of mobile unit identification devices can be avoided.

In the frequency band used by WLAN devices, in addition to home electric appliances such as a microwave oven

and industrial/scientific/m

edical devices, in

in production lines of a factory, etc., specified low power radio

Before using this device, confirm that in

low power radio stations or amateur radio stations are not in operation in your neighborhood

If this device generates harmful radio wave interference against in

of mobile objects, change the using frequency promptly or stop using wireless LAN function.

If the use of this product causes radio interference with a designated low

identification or if you have any othe

It is recommended that this product be used within a 25 m radius (unobstructed) from devices it will communicate with.

However, due to the nature of wireless LAN technology, the communication

environment, such as the structure/material of the building it is being used in, obstacles, software, installation

conditions, and radio wave conditions.

There may also be situations where communication slows down

In mixed IEEE 802.11g and IEEE 802.11b wireless LAN environments, IEEE 802.11g functions may not be available in order

to maintain compatibility with IEEE 802.11b standards. If IEEE 802.11g functions are required, keep IEEE 802

IEEE 802.11b networks separate, and leave at least five channels

Power ON/OFF

Power

cable to an AC adapter.

ower

cable to the DC

and connects the power supply plug of the AC adapter to an

Then power of R

emote

power LED turns on green

Remove the power

supply plug of the AC adapter from an outlet.

Installation of Remote Monitoring Station

If you were provided with any installation instructions from the provider of this product, be sure

Install the Remote Monitoring Station according to

in. We recommend using the separately sold stand or wall attachment options to install

onitoring

tation

1/4th inch screws) can be installed using the screw

This section explains how to install the stand (sold separately).

For information on how to install the wall attachment, please refer to the manual

supplied with the wall attachment.

Set the power cable in the cable gu

Cable sticking out from bottom

Peel the paper from the

then stick the tape to the bottom surface of the stand.

Install the stand to the Remote Monitoring Station.

coin to tighten and loosen the screw.

Line the screw holes up and fasten

them with a screw.

Note 1: The thick tape is

Adsorption

ouble

-sided tape.

Note 2: Clean any dirt or dust from the bottom surface

of the stand prior to attaching the tape.

This Product is designed, developed and manufactured as contemplated for general use,

general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and

manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is se

could lead directly to death, personal injury, severe physical damage or other loss (hereinafter “High Safety Required

Use”), including without limitation, nuclear reaction control in nuclear facility, aircraft flight control, air traffic

eavy transport logistics, medical life support system, missile launch control in weapon system. You shall

not use this Product without securing the sufficient safety

wireless technology

Wireless devices that use the 2.4 GHz band (as indicated above) make use of the entire bandwidth

and are unable to avoid using the bandwidth used by mobile identification equipment. FHSS is used

as the modulation method, and such devices may interfere with

In addition to commercial, scientific, and medical devices (such as microwaves), on

power radio stations (nonlicensed) for mobile identification used in factory produc

other locations are also operated within the frequency band used by this product.

Prior to using this product, confirm that there are no on

stations for mobile identification use being operated nearby.

If the use of this product causes radio interference with an on

identification, immediately stop the produc

t from transmitting radio waves, and contact support (information

below) to discuss ways to prevent interference (such as putting up partitions).

If the use of this product causes radio interference with a designated low

identification or if you have any other concerns, please contact the source this product was obtained from.

It is recommended that this product be used within a 10 m radius (the line

output for Class 2). However, due to the nature of Bluetooth® wireless technology, the

communication distance may vary depending on the usage environment, such as the structure/material of the building it

is being used in, obstacles, software, installation

conditions, and radio wave conditions. There may also be situations

where communication slows down or even becomes impossible.

If you will be using this product on an airplane, first contact the relevant airline company to confirm.

responsible for any data transmitted nor information leaked during Bluetooth® wireless technology

The product uses the 2.4 GHz band. DS

SS and OFDM are used as the modulation schemes. The

about 40 m or less.

All bandwidths can be used, and that bands of mobile unit identification devices can be avoided.

In the frequency band used by WLAN devices, in addition to home electric appliances such as a microwave oven

edical devices, in

plant radio stations for identification of mobile objects used

in production lines of a factory, etc., specified low power radio

Before using this device, confirm that in

plant

low power radio stations or amateur radio stations are not in operation in your neighborhood

If this device generates harmful radio wave interference against in

of mobile objects, change the using frequency promptly or stop using wireless LAN function.

If the use of this product causes radio interference with a designated low

identification or if you have any othe

r concerns, please contact the provider of this product.

It is recommended that this product be used within a 25 m radius (unobstructed) from devices it will communicate with.

However, due to the nature of wireless LAN technology, the communication

environment, such as the structure/material of the building it is being used in, obstacles, software, installation

conditions, and radio wave conditions.

There may also be situations where communication slows down

In mixed IEEE 802.11g and IEEE 802.11b wireless LAN environments, IEEE 802.11g functions may not be available in order

to maintain compatibility with IEEE 802.11b standards. If IEEE 802.11g functions are required, keep IEEE 802

IEEE 802.11b networks separate, and leave at least five channels

cable to an AC adapter.

cable to the DC

IN connector of the product

and connects the power supply plug of the AC adapter to an

emote

onitoring

power LED turns on green

a short time.

supply plug of the AC adapter from an outlet.

Installation of Remote Monitoring Station

If you were provided with any installation instructions from the provider of this product, be sure

Install the Remote Monitoring Station according to

in. We recommend using the separately sold stand or wall attachment options to install

tation

. Commercially sold tripods or other fixtures (that use

1/4th inch screws) can be installed using the screw

This section explains how to install the stand (sold separately).

For information on how to install the wall attachment, please refer to the manual

supplied with the wall attachment.

Set the power cable in the cable gu

Cable sticking out from bottom

Peel the paper from the

Adsorption

tape or the cut side of the

then stick the tape to the bottom surface of the stand.

Install the stand to the Remote Monitoring Station.

coin to tighten and loosen the screw.

Line the screw holes up and fasten

them with a screw.

Adsorption

tape

; the thin tape

Note 2: Clean any dirt or dust from the bottom surface

of the stand prior to attaching the tape.

This Product is designed, developed and manufactured as contemplated for general use,

general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and

manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is se

could lead directly to death, personal injury, severe physical damage or other loss (hereinafter “High Safety Required

Use”), including without limitation, nuclear reaction control in nuclear facility, aircraft flight control, air traffic

eavy transport logistics, medical life support system, missile launch control in weapon system. You shall

not use this Product without securing the sufficient safety

required for the High Safety Required Use.

Wireless devices that use the 2.4 GHz band (as indicated above) make use of the entire bandwidth

and are unable to avoid using the bandwidth used by mobile identification equipment. FHSS is used

as the modulation method, and such devices may interfere with

other devices at a range of 10 m.

In addition to commercial, scientific, and medical devices (such as microwaves), on

power radio stations (nonlicensed) for mobile identification used in factory produc

other locations are also operated within the frequency band used by this product.

Prior to using this product, confirm that there are no on

premise