User's Manual

8
No. Type Length Usage Playback Stop Volume Priority Default
announcement
message
9 Cancel sound 2sec Confirmation sound
played when the Call
Cancel Button is
pressed
When the
Call
Cancel
Button is
pressed
Playback
completion
Set
volume
1 "Your request has
been canceled."
10 Chimes sound 5sec Chime sound played
prior to playing an
information
announcements/thermal
environment level
announcement
Announcement
1-5 /
Prior to
thermal
environment
level
announcement
Playback
completion
Set
volume
--- Chimes sound
11 Thermal
environment
level
announcement
20sec Thermal environment
alert announcement
When a
thermal
environment
level of 4 or
5 is detected
* After
playing the
chime sound,
an alert
announcement
must be made.
Stops after
repeating
twice (can be
set to repeat
from 1 to 10
times)）
Set
volume
5 "You have a risk to
get heat stroke in
this room.
Please take some
water, make the
room
cooler etc.
to avoid
the risk. "
12 Alarm sound 5sec Alarm sound played
when an intrusion is
detected
After
sending a
photo when an
intrusion
was detected
• After
repeating for
10 minutes
• When the
trespass mode
is OFF
• When
abnormality
detection
status is OFF
Maximum
volume
(Level
5)
2 Alarm sound
13 Emergency
Call Button
15sec Announcement sound
played until a call is
received from the
center, after the
Emergency Call B
utton
is pressed
After
pressing the
Emergency
Call Button
* Repeats
until the
stop
condition
• When
incoming call
received from
the center was
automatically
answered
•
When cancel
is pressed
• When time
has passed (5
minutes)
Set
volume
2 "Emergency Call
Button has been ju
st
pressed.
It's connecting now
so please wait a
while. "
14 Received
call
announcement
20sec Announcement sound
played until a call is
received from the
center, after the
Consulting Call B
utton
is pressed
When there is
an incoming
call
・Playback
completion
・When the
Call
Cancel B
utton
is pressed
Set
volume
2 "Receiving a call.
Please hold on.
Please press the
Call
Cancel B
utton if it's
unnecessary. "
15 Consulting
announcement
10sec Announcement sound
played until a call is
received from the
center, after the
Consulting Call B
utton
is pressed
After
pressing the
Consulting
Call Button
* Repeats
until the
stop
condition is
reached
• When
incoming call
received from
the center was
automatically
answered
•
When cancel
is pressed
• When time
has passed (5
minutes)
Set
volume
2 "Consulting Call
B
utton has been just
pressed.
It's connecting now
so please hold on a
minute. "
16 Ring back
tone
5sec Outgoing call ring
back tone
When there is
an outgoing
call
• When the
center has
responded
•
When cancel
is pressed
• When an
outgoing call
failed
Set
volume
2 Ringing tone