Operation Manual

First-time setup of your d evice
Selecting a location
SelectingalocationDeviceMainsadapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating an d damage.
• The underside of the device heats up d uring normal operation. Prolonged contact
with the skin may become unpleasant or even result in b urns.
• Place the device on a s table, flat, non-slippery surface. Please note t hat the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep o ther objects at least 100 mm away from the device and its
mains adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the d evice to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains a dapter connecting
Preparingforo perationMainsadapter
Observe the safety notes in the enclosed "Safety/R egulations" manual.
The supplied power cable conforms to the requirements of the country in
which you pu rchased yo ur device. Make sure that the power cable is approved
for use in the c ountry in which you intend to use it.
3
1
2
► Connect the power cable (1) to the
mains adapter.
► Plug the mains cable (2) into a mains outlet.
► Connect the mains adapter cable (3) to
the DC jack (DC IN) of the device.
Fujitsu 17