Operation Manual

Removing and installing components
during servicing
Attaching the cover
2
1
► Place the cover i
n the correct m ounting position (1).
Ifyouremovemo
re tha n one component at the same time, keep the screws for the
individual co
mponents separately from each other and make sure that you use the
correct screw
s. If you install the wrong screws, componen ts may be damaged.
► Fasten the screw (2).
► Insert the battery (see Chapter "
Insertin g battery", Page 32).
Finishing component removal
After y ou have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery ag ain (see "
Insertin g battery " , Page 3 2).
► Turn the notebook the right way up ag ain a nd place it on a flat surface.
► Reconnect the cables that you disconn ecte d before.
58 Fujitsu