Operation Manual

Troubleshooting and tips
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is n o t switched on. ► Make sure that the printer is sw
itched
on and ready for operation (ref
er to the
documentation supplied w ith t
he printer).
The printer is not connected c
orrectly.
► Check that the d ata cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty o r not correctly
installed, or it is the wrong printer driver.
► Check that the d ata cable connecting
the notebook to the printer is properly
connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
The radio connectio
n to a network does not work
Theradioconn ecti
ontoane tworkdoes not work
Cause Troubleshooting
The wireless compo
nent is disabled.
► Switch the radio componen t on (see
"
Switching the wireless components on and
off", Page 40).
The wireless c omponent is enabled. Despite
this, the wireless connection to a network doe s
not work.
► Check whether the radio connection is
switched on via the software.
► Further information on using the radio
component can be found in the help files.
Acoustic war
nings
Acousticer
rormessages
Errors
Cause
Troubleshooting
A beep sounds every few seconds.
The battery is almost fl at.
► Charg e the ba ttery.
Error messages on the screen
Errormessages onthescr eenErrormessage:
This section describes the error messages g enerat ed by the BIOS Setup. Error messages displayed
by the operating system or programmes are described in the relevant documentation.
If the error message appears repeatedly, despite troub leshooting mea sures, please
contact the place of purchase or our customer service centre.
Fujitsu 65