Operating Manual FUJITSU LIFEBOOK A556 System
Congratulations on your purchase of an innovative product from Fujitsu. The latest information about our products, tips, updates etc. can be found on the Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.
Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2015. All rights reserved. Publication Date 11/2015 Order No.
FUJITSU LIFEBOOK A556 Operating Manual Innovative technology 7 Ports and controls 9 Important notes 12 First-time setup of your device 16 Working with the notebook 19 Security functions 40 Connecting external devices 44 Removing and installing components during servicing 48 Settings in BIOS Setup Utility 54 Troubleshooting and tips 57 Technical data 64 Manufacturer’s notes 66 Index 68
Remarks Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions. Trademarks Fujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries.
Contents Contents Innovative technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Wireless LAN/Bluetooth radio components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switching the wireless components on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting up WLAN access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ethernet and LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents The printer does not print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The radio connection to a network does not work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Acoustic warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Error messages on the screen . . . . . . . . . . . . .
Contents 6 Fujitsu
Innovative technology Innovative technology ... and ergonomic design make your device a reliable and convenient companion. The device boots very quickly, is ready for immediate use and offers a particularly long operating time because of its high capacity battery. With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better protect your system against unauthorised access by using the powerful password properties.
Innovative technology Notational conventions Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information for the proper use of the device.
Ports and controls Ports and controls This chapter presents the individual hardware components of your device. It gives an overview of the indicators and connections of the device. Please familiarise yourself with these components before you start to work with the device.
Ports and controls Left panel 1 1 2 3 4 = = = = 2 LAN port VGA monitor port HDMI port USB port 3.0 4 3 5 6 5 = USB port 3.0 with charging function (Anytime USB charge) 6 = Headset port Right-hand side 1 1 2 3 4 10 = = = = 2 Memory card slot USB port 2.
Ports and controls Underside 1 2 3 4 5 1 = Battery cover 2 = Battery (under the battery cover) 3 = Hard disk service compartment (under the battery cover) Fujitsu 4 = Battery reset button 5 = Memory service compartment 11
Important notes Important notes Notes Importantnotes This chapter contains essential safety information which must be followed when working with your notebook. Other notes also provide useful information which will help you with your notebook. Safety notes Notes Safetynotes Please follow the safety notes provided in the "Safety/Regulations" manual as well as the safety notes given below. Please pay special attention to the sections in the manual marked with the symbol on the left.
Important notes Energy saving Energysaving Energy Notes Switch the notebook off when it is not in use. Switch off external, connected devices if you are not using them. If you use the energy saving functions, the notebook uses less energy. You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment.
Important notes Travelling with your notebook Mobile operation Notebook Transportation Notes Please observe the points listed below when travelling with your notebook. Before you travel ► Back up important data stored on your hard disk. ► Switch off the radio component for data security reasons. With data traffic via a wireless connection, it is also possible for unauthorised third parties to receive data.
Important notes Cleaning the notebook Do not clean any interior parts yourself; leave this job to a service technician. Only use cleaning products designed for computers. Normal household cleaners and polishes can damage the markings on the keyboard and the device, the paintwork or the notebook itself. Ensure that no liquid enters the notebook. The LCD screen very sensitive to scratches. Only clean the display surface with a very soft, slightly damp cloth. ► Switch the notebook off.
First-time setup of your device First-time setup of your device Gettingstarted First-timesetup Please read the chapter "Important notes", Page 12. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before you switch on the device for the first time, connect it to the mains voltage using the mains adapter, see "Mains adapter connecting", Page 17.
First-time setup of your device Selecting a location Selectinga location Mainsadapter Device Select a suitable location for the device before setting it up. Follow the instructions below when doing so: • Never place the device or the mains adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can block the air vents and cause overheating and damage.
First-time setup of your device Switching on the device for the first time Switchingon for thefirsttime When you switch on the device for the first time, the supplied software is installed and configured. Because this procedure must not be interrupted, you should set aside enough time for it to be fully completed and connect the device to the mains using the mains adapter.
Working with the notebook Working with the notebook Notebook Notebook,operation This chapter describes the basics for operating your notebook. Please read the chapter entitled "Connecting external devices", Page 44 for instructions on how to connect devices such as a mouse and a printer to the notebook. Please refer to the notes in "Important notes", Page 12.
Working with the notebook Status indicators Description Wireless components indicator • The indicator is lit: The wireless components are switched on. • The indicator is not lit: The wireless components are switched off. Power-on indicator/Standby • The indicator is lit: The notebook is switched on. • The indicator flashes: The notebook is in standby mode. • The indicator is not lit: The notebook is switched off.
Working with the notebook Switching on the notebook ► Open the LCD screen. Switching on ► Press the ON/OFF switch for about one second to switch the notebook on. The power-on indicator is lit. Notebook: switching off Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. ► If the notebook is not switched off automatically, press the ON/OFF switch for approx. five seconds.
Working with the notebook Keyboard Keyboardkeypad Numeric Buttons The keyboard of your notebook is subject to continuous wear through normal use. The key markings are especially prone to wear. The key markings are liable to wear away over the life of the notebook. The keyboard has been designed to provide all the functions of an enhanced keyboard. Some enhanced keyboard functions are mapped with key combinations. The following description of keys refers to Windows.
Working with the notebook Key Description Backspace key The Backspace key deletes the character to the left of the cursor. Backspace Tab key The Tab key moves the cursor to the next tab stop. Tabkey Enter key (return) The Enter key terminates a command line. The command you have entered is executed when you press this key. Linefeed Enter Return Enterkey Caps Lock key The Caps Lock key activates the Caps Lock mode, and the corresponding icon is displayed in the Windows information area.
Working with the notebook Separate number block Numeric Separatenumeric Num Lock keypad keypad The keyboard of your notebook has a separate number block on the far right. Key combinations Keycombinations The following description of key combinations applies to Windows operating systems. Some of the following key combinations may not function in other operating systems or with certain device drivers. Other key combinations are described in the relevant manuals supplied with your application programs.
Working with the notebook Combination Description Decrease screen brightness This key combination decreases the brightness of the screen. Screenbrightness LCDscreen Fn+F6 Increase screen brightness This key combination increases the brightness of the screen. Screenbrightness Fn+F7 Decrease volume This key combination reduces the volume of the internal loudspeakers. Volume Fn+F8 Increase volume This key combination increases the volume of the internal loudspeakers.
Working with the notebook Key combinations using the Windows keys are detailed in the manual for your operating system. Country and keyboard settings ► Change the country and keyboard settings as described in the documentation for your operating system. Touchpad and touchpad buttons Keep the touchpad clean. Protect it from dirt, liquids and grease. Touchpad Do not use the touchpad if your fingers are dirty. Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons.
Working with the notebook Selecting an item ► Move the pointer to the item you wish to select. ► Tap the touchpad once or press the left button once. The item is selected. Touchpad Executing commands ► Move the pointer to the field you wish to select. ► Tap the touchpad twice or press the left button twice. The command is executed. Touchpad Dragging items ► Select the desired item. ► Press and hold the left button and, with your finger on the touchpad, drag the item to the desired position.
Working with the notebook LCD screen Notes LCDscreen High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a particular resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear image. The resolution of your notebook’s screen is set to the optimum at the factory.
Working with the notebook Webcam Webcam Depending on the software used, you can use your Webcam to take pictures, record video clips or take part in web chats. • • • • The picture quality depends on the lighting conditions and the software being used. You can only operate the webcam with a particular application (e.g. an Internet telephony program or a video conferencing program which supports a webcam). When using the webcam the notebook support must not wobble.
Working with the notebook Rechargeable battery Life,battery Battery Rechargeablebattery When not plugged into a mains socket, the notebook runs on its built-in battery. You can increase the life of the battery by caring for the battery properly. The average battery life is around 500 charge/discharge cycles. You can extend the battery life by taking advantage of the available energy saving functions.
Working with the notebook Removing and installing the battery Only use batteries approved by Fujitsu for your notebook. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections. Never store a battery for long periods in the discharged state. This can make it impossible to recharge. Removing the battery ► Prepare for removal, see chapter "Preparing to remove components", Page 49. 1 2 ► Remove the screws (1). ► Lift off the battery cover (2).
Working with the notebook 6 4 5 3 ► ► ► ► 32 Slide the release button in the direction of the arrow (3). Lift the battery slightly upwards using the pulling aid (4). Grip the battery at position (5). Remove the battery from the battery compartment (6).
Working with the notebook Inserting battery 1 2 ► Position the rechargeable battery at the edge and fold it in the direction of the arrow (1). ► Slide the release button in the direction of the arrow (2). 4 3 ► Place the battery cover on the device (3). ► Tighten the screws (4). ► Complete the removal, see chapter "Finishing component removal", Page 53.
Working with the notebook Optical drive (optional) Opticaldrive This product contains a light emitting diode, classification according to IEC 60825 1:2007: LASER CLASS 1, and must therefore not be opened. Handling data carriers Handling Observe the following guidelines when handling data carriers: • • Avoid touching the surface of a data carrier. Only handle data carriers by their edges. Always store data carriers in their cases.
Working with the notebook Inserting or removing a data carrier Removing Inserting The notebook must be switched on. ► Push the insert/eject button (1). The drive tray will open. ► Gently pull the drive tray (2) completely out. 2 1 ► Place the data carrier in the drive tray with the printed side facing upwards. or ► Remove a data carrier that has been inserted. ► Push in the drive tray until you feel it lock into place.
Working with the notebook Using the power-management features Battery Power The notebook uses less power when the available power-management features are used. You will then be able to work longer when using the battery before having to recharge it. Power efficiency is increased and environmental pollution reduced. By choosing the best power options, you can make significant savings and at the same time help protect the environment.
Working with the notebook Memory cards Slot Your notebook is equipped with an integrated memory card reader. Observe the manufacturer’s instructions when handling the memory cards. Memory card Supported formats Your notebook supports the following formats: • • SDHC SDXC Inserting the memory card ► Carefully slide the memory card into the slot. The label should be facing upward. Do not apply excessive force, as otherwise the delicate contact surfaces could be damaged.
Working with the notebook Loudspeakers and microphones Bass loudspeaker (subwoofer) Loudspeakers Microphone Volumecontrol You will find information about the exact position of speakers and microphones in chapter "Ports and controls", Page 9. Please refer to chapter "Key combinations", Page 24 for information on setting the volume and also enabling/disabling the loudspeakers using key combinations. If you attach an external microphone, the built-in microphone is disabled.
Working with the notebook Ethernet and LAN EthernetLAN The internal network module of your notebook supports Ethernet LAN. You can use it to establish a connection to a local network (LAN = Local Area Network). ► Connect the network cable to the LAN port of the notebook (1). ► Connect the network cable to your network connection (2). 1 2 Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope.
Security functions Security functions Securityfunctions Your notebook has several security features that you can use to secure your system from unauthorised access. This chapter explains how to use each function, and what the benefits are. Please remember that in some cases, for example, forgetting your password, you may be locked out and unable to access your data.
Security functions Configuring password protection in BIOS Setup Utility Before using the various options for password protection in the BIOS Setup utility to increase data security, please observe the following: Make a note of the passwords and keep them in a safe place. If you forget your supervisor password you will not be able to access your notebook. Deletion of the password is not covered by your warranty and a charge will be made for assistance.
Security functions Changing the supervisor or user password You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. User password Supervisorpassword Password ► Call the BIOS Setup Utility and go to the Security menu. ► When changing the password, proceed exactly as for password assignment.
Security functions Password protection for the hard disk If a supervisor password has been assigned, a password for the hard disk can also be set in the Hard Disk Security menu. The hard disk is protected by this password. Data on this hard disk can only be read into another system if the correct password has been entered.
Connecting external devices Connecting external devices Always refer to the safety information provided in "Important notes", Page 12 before connecting or disconnecting any devices to or from your notebook. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug.
Connecting external devices HDMI port HDMIport The HDMI port on your notebook can be used to connect an external amplifier, LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port of the notebook. Connecting USB devices USBports On the USB ports, you can connect external devices that also have a USB port (e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable.
Connecting external devices USB port with charging function (Anytime USB charge) USBchargingfunction It is recommended that the notebook be operated with the power supply connected whenever the USB port with charging function is in use, as this function will drain the battery more quickly if an external USB device is being charged.
Connecting external devices Headset port Connectingaudio devices Connectingheadphones Audioports You can connect a headset, headphones or external loudspeakers to your notebook via the headset port. ► Connect the audio cable to the external device. ► Connect the audio cable to the headset port of the notebook. The internal loudspeakers are disabled. If you buy a cable from a retailer, please note the following information: The headset port on your notebook is a "3.5 mm jack socket".
Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty. Servicing Components After consulting the Hotline/Service Desk, you may remove and install the components described in this chapter yourself.
Removing and installing components during servicing Preparing to remove components If you are going to remove or change system components, prepare for the removal as follows: Please observe the safety information in chapter "Important notes", Page 12. Remove the power plug from the mains outlet ! ► Switch the device off. The device must not be in energy-saving mode ! ► Close the LCD screen. ► Remove all the cables from the device. ► Turn the device over and place it on a stable, flat and clean surface.
Removing and installing components during servicing Removing the cover ► Remove the screw (1). ► Lift the cover off the notebook (2). 1 1 2 Keep the screw in a safe place. If you are removing several components at the same time, store the screws for the individual components separately from each other. When installing the cover, you must use the correct screws. If you install the wrong screws, components may be damaged. Removing memory modules ► Carefully push the two mounting clips outwards (1).
Removing and installing components during servicing Installing a memory module ► Insert the memory module with the contacts and the recess (a) facing the slot (1). ► Carefully push the memory module downwards until you feel it click into place (2). Memory module expansion 1 2 a Securing the cover When installing the cover, you must use the correct screws. If you install the wrong screws, components may be damaged. ► Place the cover into its installation position in the direction of the arrow (1).
Removing and installing components during servicing Removing and installing the hard disk Removing a hard disk • The battery cover and battery are removed, see "Removing the battery", Page 31. a 1 1 4 3 2 3 ► Remove the screws (1). To prevent damaging the connecting cable and contacts, do not pull sharply on the cable and always hold the cable at the plug. ► To disconnect the hard disk from the connecting cable (a) with the contacts, lift the hard disk carefully up by a few centimetres (2).
Removing and installing components during servicing Installing a hard disk If you are installing more than one component at the same time, keep the screws for the individual components separately from each other and make sure that you use the correct screws. If you install the wrong screws, components may be damaged. To prevent damaging the connecting cable and contacts, do not pull sharply on the cable and always hold the cable at the plug.
Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility System Setup Configuration,BIOSSetupUtility Hardwareconfiguration settings,BIOSSetupUtility configuration The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the notebook. When it is delivered, the notebook is set to factory default settings. You can change these settings in BIOS Setup Utility. Any changes you make take effect as soon as you save and exit the BIOS Setup Utility.
Settings in BIOS Setup Utility Operating BIOS Setup Utility BIOS SetupUtility Press the F1 key to display help on the operation of the BIOS Setup Utility. The description of the individual settings is shown in the right-hand window of the BIOS Setup Utility. With the F9 key you can load the default settings of the BIOS Setup Utility. ► Use the cursor keys ← or → to select the menu you wish to access to make changes. The menu is displayed on the screen.
Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtility You need to select the desired option in the Exit menu and activate it by pressing the Enter key: Exit Saving Changes - save changes and exit BIOS Setup Utility ► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The notebook is rebooted and the new settings come into effect.
Troubleshooting and tips Troubleshooting and tips Fault Tips Troubleshooting Follow the safety notes in the "Safety/Regulations" manual when connecting or disconnecting cables. If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. ► Switch the notebook off. ► Please contact the Hotline/Service Desk.
Troubleshooting and tips Restoring the hard disk contents under Windows Operatingsystem,restoring Harddisk: You can use the "Windows Recovery CD" (optionally available) and the "Drivers & Utilities CD/DVD" to reinstall the operating system. The instructions are provided on the case of the Recovery CD. During the reinstall process your personal files and any installed programs will be deleted. We advise you to backup your files to an external hard drive, or CD / DVD disk before you start.
Troubleshooting and tips The LCD screen is difficult to read LCDscreen Cause Reflected glare Troubleshooting ► Turn the notebook or alter the tilt of the LCD screen. ► Increase the brightness of the screen. The external monitor remains blank Monitor Cause Monitor is switched off. Power saving has been activated (monitor is blank). Brightness is set to dark. Screen output is set to the notebook’s LCD screen The external monitor’s power cable or data cable is not connected properly.
Troubleshooting and tips The notebook cannot be started Notebook Cause The battery is not installed correctly. Troubleshooting ► Check whether the battery is installed correctly in its compartment. ► Switch the notebook on. The battery is dead. ► Charge the battery. or ► Insert a charged battery. or The power adapter is not connected correctly. ► Connect the mains adapter to the notebook. ► Check whether the mains adapter is connected correctly to the notebook. ► Switch the notebook on.
Troubleshooting and tips The printer does not print Printer doesnotprint Cause The printer is not switched on. The printer is not connected correctly. The printer driver is faulty or not correctly installed, or it is the wrong printer driver. Troubleshooting ► Make sure that the printer is switched on and ready for operation (refer to the documentation supplied with the printer). ► Check that the data cable connecting the notebook to the printer is properly connected.
Troubleshooting and tips Error messages on the screen Error messages message: onthescreen This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programmes are described in the relevant documentation. If the error message appears repeatedly, despite troubleshooting measures, please contact the place of purchase or our customer service centre.
Troubleshooting and tips Error message/cause Resolution Previous boot incomplete - Default configuration ► Press the F1 function key when prompted used Due to an error during the previous system to do so. boot, default values were used for certain settings. Check the settings in the BIOS Setup. Real time clock error ► Contact your sales outlet or our customer service centre. nnnnK Shadow RAM failed at offset: xxxx Failing ► Contact your sales outlet or our customer Bits: zzzz service centre.
Technical data Technical data Technicaldata LIFEBOOK Technicaldata Ambient conditions Temperature: Operation Transportation Dimensions Width x Depth x Height 5 °C .... 35 °C / 41 °F .... 95 °F –15 °C .... 60 °C / 5 °F .... 140 °F 378 mm x 256 mm x 26.4 mm / 14.88 inches x 10.08 inches x 1.22 inches Weight (including 6-cell rechargeable battery) approx. 2.4 kg / 5.29 lbs Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.
Technical data Mains adapter, 65 W Technicaldata Primary Rated voltage 100 V to 240 V (automatic) Rated frequency 50 Hz to 60 Hz (automatic) Secondary (device-dependent) Rated voltage Max. rated current 19 V 3.42 A An additional mains adapter or power cable can be ordered at any time.
Manufacturer’s notes Manufacturer’s notes Disposal and recycling Notes You can find information on this subject on your notebook or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Declarations of Conformity Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx".
Manufacturer’s notes Radio frequencies used 1 2 3 4 RF module BT WLAN WLAN WLAN Frequency band 2400-2480 MHz 2410-2480 MHz 5150-5350 MHz class 2 5470-5725 MHz class 1 Max. transmission power 100 mW 100 mW 200 mW 1W Other certification markings Certification markings Any other certification markings are listed in the "Manual Appendix Additional Certifications" supplement. If such markings are available, you can find the supplement on the Internet at "http://support.ts.fujitsu.
Index Index A Acoustic error messages Alt + Tab 25 Anti-theft protection 40 Audio ports 47 Connecting audio devices 47 Connecting headphones 47 Crystal View display cleaning 15 Ctrl+Alt+Del 25 Cursor control keys 23 Cursor keys 23 61 B Back tab 25 Backspace 23 Bass loudspeaker (subwoofer) Battery battery life 30 caring for and maintaining charge level 30, 36 charging 30 self-discharge 30 storage 30 Battery indicator 20 Battery status indicator see Battery indicator 20 Battery status meter 30 Battery sym
Index G Getting started inserting 37 removing 37 Memory expansion installing 51 removing 50 Memory module important notes 49 installing 51 removing 50 Microphone 38 Mobile operation 14 Monitor connecting 44 drifting display 59 remains blank 59 Monitor port see VGA connection socket 16 H Handling data carriers 34 Hard disk: restoring the contents 58 Hardware configuration 54 HDMI port 45 I Important notes 12 Incorrect date/time 58 Indicator Caps Lock 20 drive 20 Num Lock 20 Inserting a data carrier 35 K
Index Password changing 42 entering 41 removing 42 Password protection 41 Power power consumption 36 power-management features Power indicator 20 Preparing for operation 17 Printer does not print 61 the notebook 21 Switching on for the first time 18 System configuration 54 System expansion 49 see Adding memory 49 System settings, BIOS Setup Utility 36 R Radio component: safety notes 12 Rechargeable battery 30 see Battery 30 Removing a data carrier 35 Removing memory see Adding memory 49 Return 23 S Safet
Index Windows key 23 Wireless components switch off 24 switch on 24 Wireless LAN Fujitsu Switching the module off 38 Switching the module on 38 Wireless LAN: safety notes 12 71
